net/mlx5e: Use struct assignment for WQE info updates

Struct assignment looks more clean, and implies resetting
the not assigned fields to zero, instead of holding values
from older ring cycles.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c

@@ -108,10 +108,11 @@ static void tx_fill_wi(struct mlx5e_txqsq *sq,
 {
 	struct mlx5e_tx_wqe_info *wi = &sq->db.wqe_info[pi];
 
-	memset(wi, 0, sizeof(*wi));
-	wi->num_wqebbs = num_wqebbs;
-	wi->num_bytes  = num_bytes;
-	wi->resync_dump_frag_page = page;
+	*wi = (struct mlx5e_tx_wqe_info) {
+		.num_wqebbs = num_wqebbs,
+		.num_bytes  = num_bytes,
+		.resync_dump_frag_page = page,
+	};
 }
 
 void mlx5e_ktls_tx_offload_set_pending(struct mlx5e_ktls_offload_context_tx *priv_tx)

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -1364,13 +1364,12 @@ static void mlx5e_deactivate_txqsq(struct mlx5e_txqsq *sq)
 	/* last doorbell out, godspeed .. */
 	if (mlx5e_wqc_has_room_for(wq, sq->cc, sq->pc, 1)) {
 		u16 pi = mlx5_wq_cyc_ctr2ix(wq, sq->pc);
-		struct mlx5e_tx_wqe_info *wi;
 		struct mlx5e_tx_wqe *nop;
 
-		wi = &sq->db.wqe_info[pi];
+		sq->db.wqe_info[pi] = (struct mlx5e_tx_wqe_info) {
+			.num_wqebbs = 1,
+		};
 
-		memset(wi, 0, sizeof(*wi));
-		wi->num_wqebbs = 1;
 		nop = mlx5e_post_nop(wq, sq->sqn, &sq->pc);
 		mlx5e_notify_hw(wq, sq->pc, sq->uar_map, &nop->ctrl);
 	}
@@ -1482,20 +1481,21 @@ int mlx5e_open_xdpsq(struct mlx5e_channel *c, struct mlx5e_params *params,
 
 		/* Pre initialize fixed WQE fields */
 		for (i = 0; i < mlx5_wq_cyc_get_size(&sq->wq); i++) {
-			struct mlx5e_xdp_wqe_info *wi  = &sq->db.wqe_info[i];
 			struct mlx5e_tx_wqe      *wqe  = mlx5_wq_cyc_get_wqe(&sq->wq, i);
 			struct mlx5_wqe_ctrl_seg *cseg = &wqe->ctrl;
 			struct mlx5_wqe_eth_seg  *eseg = &wqe->eth;
 			struct mlx5_wqe_data_seg *dseg;
 
+			sq->db.wqe_info[i] = (struct mlx5e_xdp_wqe_info) {
+				.num_wqebbs = 1,
+				.num_pkts   = 1,
+			};
+
 			cseg->qpn_ds = cpu_to_be32((sq->sqn << 8) | ds_cnt);
 			eseg->inline_hdr.sz = cpu_to_be16(inline_hdr_sz);
 
 			dseg = (struct mlx5_wqe_data_seg *)cseg + (ds_cnt - 1);
 			dseg->lkey = sq->mkey_be;
-
-			wi->num_wqebbs = 1;
-			wi->num_pkts   = 1;
 		}
 	}
 

drivers/net/ethernet/mellanox/mlx5/core/en_rx.c

@@ -505,9 +505,12 @@ static int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix)
 			    MLX5_OPCODE_UMR);
 	umr_wqe->uctrl.xlt_offset = cpu_to_be16(xlt_offset);
 
-	sq->db.wqe_info[pi].opcode = MLX5_OPCODE_UMR;
-	sq->db.wqe_info[pi].num_wqebbs = MLX5E_UMR_WQEBBS;
-	sq->db.wqe_info[pi].umr.rq = rq;
+	sq->db.wqe_info[pi] = (struct mlx5e_icosq_wqe_info) {
+		.opcode     = MLX5_OPCODE_UMR,
+		.num_wqebbs = MLX5E_UMR_WQEBBS,
+		.umr.rq     = rq,
+	};
+
 	sq->pc += MLX5E_UMR_WQEBBS;
 
 	sq->doorbell_cseg = &umr_wqe->ctrl;

drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c

@@ -78,8 +78,11 @@ void mlx5e_trigger_irq(struct mlx5e_icosq *sq)
 	struct mlx5e_tx_wqe *nopwqe;
 	u16 pi = mlx5_wq_cyc_ctr2ix(wq, sq->pc);
 
-	sq->db.wqe_info[pi].opcode = MLX5_OPCODE_NOP;
-	sq->db.wqe_info[pi].num_wqebbs = 1;
+	sq->db.wqe_info[pi] = (struct mlx5e_icosq_wqe_info) {
+		.opcode     = MLX5_OPCODE_NOP,
+		.num_wqebbs = 1,
+	};
+
 	nopwqe = mlx5e_post_nop(wq, sq->sqn, &sq->pc);
 	mlx5e_notify_hw(wq, sq->pc, sq->uar_map, &nopwqe->ctrl);
 }