Commit 41bd6adf authored by Tony Lindgren's avatar Tony Lindgren

Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"

This reverts commit 30443b31.

Turns out this causes other issues as reported by Adam.
Signed-off-by: default avatarTony Lingren <tony@atomide.com>
parent 647efef6
...@@ -206,6 +206,8 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ ...@@ -206,6 +206,8 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
}; };
&omap3_pmx_wkup { &omap3_pmx_wkup {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_reset_pin>;
hsusb2_reset_pin: pinmux_hsusb1_reset_pin { hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
pinctrl-single,pins = < pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
...@@ -232,6 +234,8 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ ...@@ -232,6 +234,8 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
}; };
&omap3_pmx_core2 { &omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins { hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment