Commit 42e52616 authored by H. Nikolaus Schaller's avatar H. Nikolaus Schaller Committed by Viresh Kumar

cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode

In preparation for using the multi_regulator capability of
this driver for handling the ABB LDO for OPP1G of the omap36xx
we have to take care that the (legacy) vdd-supply name is
cpu0-supply = <&vcc>;

To do this we add another field to the SoC description table which
optionally can specify a list of regulator names.

For omap36xx we define "cpu0-supply" and "vbb-supply".

The default remains "vdd-supply" and "vbb-supply".
Signed-off-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Tested-by: default avatarAdam Ford <aford173@gmail.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
parent 6ddf6c91
...@@ -15,12 +15,16 @@ In 'cpus' nodes: ...@@ -15,12 +15,16 @@ In 'cpus' nodes:
In 'operating-points-v2' table: In 'operating-points-v2' table:
- compatible: Should be - compatible: Should be
- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
omap34xx, omap36xx and am3517 SoCs
- syscon: A phandle pointing to a syscon node representing the control module - syscon: A phandle pointing to a syscon node representing the control module
register space of the SoC. register space of the SoC.
Optional properties: Optional properties:
-------------------- --------------------
- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
For each opp entry in 'operating-points-v2' table: For each opp entry in 'operating-points-v2' table:
- opp-supported-hw: Two bitfields indicating: - opp-supported-hw: Two bitfields indicating:
1. Which revision of the SoC the OPP is supported by 1. Which revision of the SoC the OPP is supported by
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
struct ti_cpufreq_data; struct ti_cpufreq_data;
struct ti_cpufreq_soc_data { struct ti_cpufreq_soc_data {
const char * const *reg_names;
unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data,
unsigned long efuse); unsigned long efuse);
unsigned long efuse_fallback; unsigned long efuse_fallback;
...@@ -165,7 +166,10 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = { ...@@ -165,7 +166,10 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = {
* seems to always read as 0). * seems to always read as 0).
*/ */
static const char * const omap3_reg_names[] = {"cpu0", "vbb"};
static struct ti_cpufreq_soc_data omap36xx_soc_data = { static struct ti_cpufreq_soc_data omap36xx_soc_data = {
.reg_names = omap3_reg_names,
.efuse_xlate = omap3_efuse_xlate, .efuse_xlate = omap3_efuse_xlate,
.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
.efuse_shift = 9, .efuse_shift = 9,
...@@ -299,7 +303,7 @@ static int ti_cpufreq_probe(struct platform_device *pdev) ...@@ -299,7 +303,7 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
const struct of_device_id *match; const struct of_device_id *match;
struct opp_table *ti_opp_table; struct opp_table *ti_opp_table;
struct ti_cpufreq_data *opp_data; struct ti_cpufreq_data *opp_data;
const char * const reg_names[] = {"vdd", "vbb"}; const char * const default_reg_names[] = {"vdd", "vbb"};
int ret; int ret;
match = dev_get_platdata(&pdev->dev); match = dev_get_platdata(&pdev->dev);
...@@ -355,9 +359,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev) ...@@ -355,9 +359,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
opp_data->opp_table = ti_opp_table; opp_data->opp_table = ti_opp_table;
if (opp_data->soc_data->multi_regulator) { if (opp_data->soc_data->multi_regulator) {
const char * const *reg_names = default_reg_names;
if (opp_data->soc_data->reg_names)
reg_names = opp_data->soc_data->reg_names;
ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev, ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
reg_names, reg_names,
ARRAY_SIZE(reg_names)); ARRAY_SIZE(default_reg_names));
if (IS_ERR(ti_opp_table)) { if (IS_ERR(ti_opp_table)) {
dev_pm_opp_put_supported_hw(opp_data->opp_table); dev_pm_opp_put_supported_hw(opp_data->opp_table);
ret = PTR_ERR(ti_opp_table); ret = PTR_ERR(ti_opp_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment