Commit 43a0a98a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...
parents 6911a528 f8c6d88b
......@@ -87,10 +87,33 @@ Required properties:
implementation for the IDs to use. For Juno
R0 and Juno R1 refer to [3].
Power domain bindings for the power domains based on SCPI Message Protocol
------------------------------------------------------------
This binding uses the generic power domain binding[4].
PM domain providers
===================
Required properties:
- #power-domain-cells : Should be 1. Contains the device or the power
domain ID value used by SCPI commands.
- num-domains: Total number of power domains provided by SCPI. This is
needed as the SCPI message protocol lacks a mechanism to
query this information at runtime.
PM domain consumers
===================
Required properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
[4] Documentation/devicetree/bindings/power/power_domain.txt
Example:
......@@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
scpi_devpd: scpi-power-domains {
compatible = "arm,scpi-power-domains";
num-domains = <2>;
#power-domain-cells = <1>;
};
};
cpu@0 {
......@@ -156,6 +185,7 @@ hdlcd@7ff60000 {
...
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scpi_clk 4>;
power-domains = <&scpi_devpd 1>;
};
thermal-zones {
......@@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the
temperature sensor provided by SCP firmware to setup a thermal
zone. The ID "3" is the sensor identifier for the temperature sensor
as used by the firmware.
The num-domains property in scpi-power-domains domain specifies that
SCPI provides 2 power domains. The hdlcd node uses the power domain with
domain ID 1.
NVIDIA Tegra ACONNECT Bus
The Tegra ACONNECT bus is an AXI switch which is used to connnect various
components inside the Audio Processing Engine (APE). All CPU accesses to
the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
Required properties:
- compatible: Must be "nvidia,tegra210-aconnect".
- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
and APE interface clock (TEGRA210_CLK_APB2APE).
- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
'clocks' entries.
- power-domains: Must contain a phandle that points to the audio powergate
(namely 'aud') for Tegra210.
- #address-cells: The number of cells used to represent physical base addresses
in the aconnect address space. Should be 1.
- #size-cells: The number of cells used to represent the size of an address
range in the aconnect address space. Should be 1.
- ranges: Mapping of the aconnect address space to the CPU address space.
All devices accessed via the ACONNNECT are described by child-nodes.
Example:
aconnect@702c0000 {
compatible = "nvidia,tegra210-aconnect";
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
clock-names = "ape", "apb2ape";
power-domains = <&pd_audio>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
status = "disabled";
child1 {
...
};
child2 {
...
};
};
* Clock bindings for the Cirrus Logic CLPS711X CPUs
Required properties:
- compatible : Shall contain "cirrus,clps711x-clk".
- compatible : Shall contain "cirrus,ep7209-clk".
- reg : Address of the internal register set.
- startup-frequency: Factory set CPU startup frequency in HZ.
- #clock-cells : Should be <1>.
......@@ -13,7 +13,7 @@ for the full list of CLPS711X clock IDs.
Example:
clks: clks@80000000 {
#clock-cells = <1>;
compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
reg = <0x80000000 0xc000>;
startup-frequency = <73728000>;
};
* Currus Logic CLPS711X Framebuffer
Required properties:
- compatible: Shall contain "cirrus,clps711x-fb".
- compatible: Shall contain "cirrus,ep7209-fb".
- reg : Physical base address and length of the controller's registers +
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
......@@ -18,7 +18,7 @@ Optional properties:
Example:
fb: fb@800002c0 {
compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb";
compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb";
reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
clocks = <&clks 2>;
lcd-supply = <&reg5v0>;
......
* Cirrus Logic CLPS711X matrix keypad device tree bindings
Required Properties:
- compatible: Shall contain "cirrus,clps711x-keypad".
- compatible: Shall contain "cirrus,ep7209-keypad".
- row-gpios: List of GPIOs used as row lines.
- poll-interval: Poll interval time in milliseconds.
- linux,keymap: The definition can be found at
......@@ -12,7 +12,7 @@ Optional Properties:
Example:
keypad {
compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad";
compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad";
autorepeat;
poll-interval = <120>;
row-gpios = <&porta 0 0>,
......
......@@ -2,7 +2,7 @@ Cirrus Logic CLPS711X Interrupt Controller
Required properties:
- compatible: Should be "cirrus,clps711x-intc".
- compatible: Should be "cirrus,ep7209-intc".
- reg: Specifies base physical address of the registers set.
- interrupt-controller: Identifies the node as an interrupt controller.
- #interrupt-cells: Specifies the number of cells needed to encode an
......@@ -34,7 +34,7 @@ ID Name Description
Example:
intc: interrupt-controller {
compatible = "cirrus,clps711x-intc";
compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
reg = <0x80000000 0x4000>;
interrupt-controller;
#interrupt-cells = <1>;
......
Device-Tree bindings for LIRC TX driver for Nokia N900(RX51)
Required properties:
- compatible: should be "nokia,n900-ir".
- pwms: specifies PWM used for IR signal transmission.
Example node:
pwm9: dmtimer-pwm@9 {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer9>;
ti,clock-source = <0x00>; /* timer_sys_ck */
#pwm-cells = <3>;
};
ir: n900-ir {
compatible = "nokia,n900-ir";
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
};
* Device tree bindings for Atmel EBI
The External Bus Interface (EBI) controller is a bus where you can connect
asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs).
The EBI provides a glue-less interface to asynchronous memories through the SMC
(Static Memory Controller).
Required properties:
- compatible: "atmel,at91sam9260-ebi"
"atmel,at91sam9261-ebi"
"atmel,at91sam9263-ebi0"
"atmel,at91sam9263-ebi1"
"atmel,at91sam9rl-ebi"
"atmel,at91sam9g45-ebi"
"atmel,at91sam9x5-ebi"
"atmel,sama5d3-ebi"
- reg: Contains offset/length value for EBI memory mapping.
This property might contain several entries if the EBI
memory range is not contiguous
- #address-cells: Must be 2.
The first cell encodes the CS.
The second cell encode the offset into the CS memory
range.
- #size-cells: Must be set to 1.
- ranges: Encodes CS to memory region association.
- clocks: Clock feeding the EBI controller.
See clock-bindings.txt
Children device nodes are representing device connected to the EBI bus.
Required device node properties:
- reg: Contains the chip-select id, the offset and the length
of the memory region requested by the device.
EBI bus configuration will be defined directly in the device subnode.
Optional EBI/SMC properties:
- atmel,smc-bus-width: width of the asynchronous device's data bus
8, 16 or 32.
Default to 8 when undefined.
- atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet).
Default to "select" when undefined.
- atmel,smc-read-mode "nrd" or "ncs".
Default to "ncs" when undefined.
- atmel,smc-write-mode "nwe" or "ncs".
Default to "ncs" when undefined.
- atmel,smc-exnw-mode "disabled", "frozen" or "ready".
Default to "disabled" when undefined.
- atmel,smc-page-mode enable page mode if present. The provided value
defines the page size (supported values: 4, 8,
16 and 32).
- atmel,smc-tdf-mode: "normal" or "optimized". When set to
"optimized" the data float time is optimized
depending on the next device being accessed
(next device setup time is subtracted to the
current device data float time).
Default to "normal" when undefined.
If at least one atmel,smc- property is defined the following SMC timing
properties become mandatory. In the other hand, if none of the atmel,smc-
properties are specified, we assume that the EBI bus configuration will be
handled by the sub-device driver, and none of those properties should be
defined.
All the timings are expressed in nanoseconds (see Atmel datasheet for a full
description).
- atmel,smc-ncs-rd-setup-ns
- atmel,smc-nrd-setup-ns
- atmel,smc-ncs-wr-setup-ns
- atmel,smc-nwe-setup-ns
- atmel,smc-ncs-rd-pulse-ns
- atmel,smc-nrd-pulse-ns
- atmel,smc-ncs-wr-pulse-ns
- atmel,smc-nwe-pulse-ns
- atmel,smc-nwe-cycle-ns
- atmel,smc-nrd-cycle-ns
- atmel,smc-tdf-ns
Example:
ebi: ebi@10000000 {
compatible = "atmel,sama5d3-ebi";
#address-cells = <2>;
#size-cells = <1>;
atmel,smc = <&hsmc>;
atmel,matrix = <&matrix>;
reg = <0x10000000 0x10000000
0x40000000 0x30000000>;
ranges = <0x0 0x0 0x10000000 0x10000000
0x1 0x0 0x40000000 0x10000000
0x2 0x0 0x50000000 0x10000000
0x3 0x0 0x60000000 0x10000000>;
clocks = <&mck>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ebi_addr>;
nor: flash@0,0 {
compatible = "cfi-flash";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
atmel,smc-read-mode = "nrd";
atmel,smc-write-mode = "nwe";
atmel,smc-bus-width = <16>;
atmel,smc-ncs-rd-setup-ns = <0>;
atmel,smc-ncs-wr-setup-ns = <0>;
atmel,smc-nwe-setup-ns = <8>;
atmel,smc-nrd-setup-ns = <16>;
atmel,smc-ncs-rd-pulse-ns = <84>;
atmel,smc-ncs-wr-pulse-ns = <84>;
atmel,smc-nrd-pulse-ns = <76>;
atmel,smc-nwe-pulse-ns = <76>;
atmel,smc-nrd-cycle-ns = <107>;
atmel,smc-nwe-cycle-ns = <84>;
atmel,smc-tdf-ns = <16>;
};
};
* Cirris Logic CLPS711X PWM controller
Required properties:
- compatible: Shall contain "cirrus,clps711x-pwm".
- compatible: Shall contain "cirrus,ep7209-pwm".
- reg: Physical base address and length of the controller's registers.
- clocks: phandle + clock specifier pair of the PWM reference clock.
- #pwm-cells: Should be 1. The cell specifies the index of the channel.
Example:
pwm: pwm@80000400 {
compatible = "cirrus,ep7312-pwm",
"cirrus,clps711x-pwm";
compatible = "cirrus,ep7312-pwm", "cirrus,ep7209-pwm";
reg = <0x80000400 0x4>;
clocks = <&clks 8>;
#pwm-cells = <1>;
......
......@@ -9,6 +9,10 @@ Required properties:
Optional properties:
- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
- 0x00 - high-frequency system clock (timer_sys_ck)
- 0x01 - 32-kHz always-on clock (timer_32k_ck)
- 0x02 - external clock (timer_ext_ck, OMAP2 only)
Example:
pwm9: dmtimer-pwm@9 {
......
Amlogic Meson SoC Reset Controller
=======================================
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset"
- reg: should contain the register address base
- #reset-cells: 1, see below
example:
reset: reset-controller {
compatible = "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
};
......@@ -8,7 +8,9 @@ The reset controller registers are part of the system-ctl block on
hi6220 SoC.
Required properties:
- compatible: may be "hisilicon,hi6220-sysctrl"
- compatible: should be one of the following:
- "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
- "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
......
TI SysCon Reset Controller
=======================
Almost all SoCs have hardware modules that require reset control in addition
to clock and power control for their functionality. The reset control is
typically provided by means of memory-mapped I/O registers. These registers are
sometimes a part of a larger register space region implementing various
functionalities. This register range is best represented as a syscon node to
allow multiple entities to access their relevant registers in the common
register space.
A SysCon Reset Controller node defines a device that uses a syscon node
and provides reset management functionality for various hardware modules
present on the SoC.
SysCon Reset Controller Node
============================
Each of the reset provider/controller nodes should be a child of a syscon
node and have the following properties.
Required properties:
--------------------
- compatible : Should be,
"ti,k2e-pscrst"
"ti,k2l-pscrst"
"ti,k2hk-pscrst"
"ti,syscon-reset"
- #reset-cells : Should be 1. Please see the reset consumer node below
for usage details
- ti,reset-bits : Contains the reset control register information
Should contain 7 cells for each reset exposed to
consumers, defined as:
Cell #1 : offset of the reset assert control
register from the syscon register base
Cell #2 : bit position of the reset in the reset
assert control register
Cell #3 : offset of the reset deassert control
register from the syscon register base
Cell #4 : bit position of the reset in the reset
deassert control register
Cell #5 : offset of the reset status register
from the syscon register base
Cell #6 : bit position of the reset in the
reset status register
Cell #7 : Flags used to control reset behavior,
availible flags defined in the DT include
file <dt-bindings/reset/ti-syscon.h>
SysCon Reset Consumer Nodes
===========================
Each of the reset consumer nodes should have the following properties,
in addition to their own properties.
Required properties:
--------------------
- resets : A phandle to the reset controller node and an index number
to a reset specifier as defined above.
Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
common reset controller usage by consumers.
Example:
--------
The following example demonstrates a syscon node, the reset controller node
using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
Edison SoC.
/ {
soc {
psc: power-sleep-controller@02350000 {
compatible = "syscon", "simple-mfd";
reg = <0x02350000 0x1000>;
pscrst: psc-reset {
compatible = "ti,k2e-pscrst", "ti,syscon-reset";
#reset-cells = <1>;
ti,reset-bits = <
0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_SET|DEASSERT_CLEAR|STATUS_SET) /* 0: pcrst-dsp0 */
0xa40 5 0xa44 3 0 0 (ASSERT_SET|DEASSERT_CLEAR|STATUS_NONE) /* 1: pcrst-example */
>;
};
};
dsp0: dsp0 {
...
resets = <&pscrst 0>;
...
};
};
};
* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
Required properties:
- compatible: Should be "cirrus,clps711x-uart".
- compatible: Should be "cirrus,ep7209-uart".
- reg: Address and length of the register set for the device.
- interrupts: Should contain UART TX and RX interrupt.
- clocks: Should contain UART core clock number.
......@@ -20,7 +20,7 @@ Example:
};
uart1: uart@80000480 {
compatible = "cirrus,clps711x-uart";
compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
reg = <0x80000480 0x80>;
interrupts = <12 13>;
clocks = <&clks 11>;
......
......@@ -68,7 +68,7 @@ important.
Value type: <u32>
Definition: must be 2 - denoting the bit in the entry and IRQ flags
- #qcom,state-cells:
- #qcom,smem-state-cells:
Usage: required for outgoing entries
Value type: <u32>
Definition: must be 1 - denoting the bit in the entry
......@@ -92,7 +92,7 @@ wcnss-smp2p {
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,state-cells = <1>;
#qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
......
......@@ -51,7 +51,7 @@ important.
Definition: specifies the offset, in words, of the first bit for this
entry
- #qcom,state-cells:
- #qcom,smem-state-cells:
Usage: required for local entry
Value type: <u32>
Definition: must be 1 - denotes bit number
......@@ -91,7 +91,7 @@ smsm {
apps_smsm: apps@0 {
reg = <0>;
#qcom,state-cells = <1>;
#qcom,smem-state-cells = <1>;
};
wcnss_smsm: wcnss@7 {
......
* Cirrus Logic CLPS711X Timer Counter
Required properties:
- compatible: Shall contain "cirrus,clps711x-timer".
- compatible: Shall contain "cirrus,ep7209-timer".
- reg : Address and length of the register set.
- interrupts: The interrupt number of the timer.
- clocks : phandle of timer reference clock.
......@@ -15,14 +15,14 @@ Example:
};
timer1: timer@80000300 {
compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
reg = <0x80000300 0x4>;
interrupts = <8>;
clocks = <&clks 5>;
};
timer2: timer@80000340 {
compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
reg = <0x80000340 0x4>;
interrupts = <9>;
clocks = <&clks 6>;
......
......@@ -352,6 +352,10 @@ REGULATOR
devm_regulator_put()
devm_regulator_register()
RESET
devm_reset_control_get()
devm_reset_controller_register()
SLAVE DMA ENGINE
devm_acpi_dma_controller_register()
......
......@@ -1536,6 +1536,7 @@ M: David Brown <david.brown@linaro.org>
L: linux-arm-msm@vger.kernel.org
L: linux-soc@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/soc/qcom/
F: arch/arm/boot/dts/qcom-*.dts
F: arch/arm/boot/dts/qcom-*.dtsi
F: arch/arm/mach-qcom/
......@@ -1841,7 +1842,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.linaro.org/people/ulfh/clk.git
S: Maintained
F: drivers/clk/ux500/
F: include/linux/platform_data/clk-ux500.h
ARM/VERSATILE EXPRESS PLATFORM
M: Liviu Dudau <liviu.dudau@arm.com>
......
/*
* Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mfc_left: region@51000000 {
compatible = "shared-dma-pool";
no-map;
reg = <0x51000000 0x800000>;
};
mfc_right: region@43000000 {
compatible = "shared-dma-pool";
no-map;
reg = <0x43000000 0x800000>;
};
};
};
......@@ -18,6 +18,7 @@
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
......@@ -288,8 +289,7 @@ buck7_reg: BUCK7 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
......
......@@ -17,6 +17,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
......@@ -133,8 +134,7 @@ key_e {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
......
......@@ -13,6 +13,7 @@
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
chosen {
......@@ -499,6 +500,11 @@ &i2s0 {
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
&mfc {
memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
&mixer {
status = "okay";
};
......
......@@ -16,6 +16,7 @@
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
......@@ -466,8 +467,7 @@ key_enter {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
......
......@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
......@@ -112,8 +113,7 @@ key_E {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
......
......@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
......@@ -516,8 +517,7 @@ &i2s0 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
......@@ -344,8 +345,7 @@ &i2s0 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Spring";
......@@ -425,8 +426,7 @@ &i2s0 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -16,6 +16,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
......@@ -347,8 +348,7 @@ buck10_reg: BUCK10 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pit Rev 6+";
......@@ -702,8 +703,7 @@ &i2s0 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -13,6 +13,7 @@
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
......@@ -355,8 +356,7 @@ hdmiddc@50 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -17,6 +17,7 @@
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
memory {
......@@ -406,8 +407,7 @@ hdmiddc@50 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
#include "exynos5420-cpus.dtsi"
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pi Rev 10+";
......@@ -670,8 +671,7 @@ &i2s0 {
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
......
......@@ -18,6 +18,7 @@ menuconfig ARCH_EXYNOS
select EXYNOS_THERMAL
select EXYNOS_PMU
select EXYNOS_SROM
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
......
......@@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_PM_SLEEP) += suspend.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
......@@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
......@@ -27,7 +27,6 @@
#include <plat/cpu.h>
#include "common.h"
#include "mfc.h"
static struct map_desc exynos4_iodesc[] __initdata = {
{
......@@ -235,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = {
NULL
};
static void __init exynos_reserve(void)
{
#ifdef CONFIG_S5P_DEV_MFC
int i;
char *mfc_mem[] = {
"samsung,mfc-v5",
"samsung,mfc-v6",
"samsung,mfc-v7",
"samsung,mfc-v8",
};
for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
break;
#endif
}
static void __init exynos_dt_fixup(void)
{
/*
......@@ -273,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
.reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
/*
* Copyright (C) 2013 Samsung Electronics Co.Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __MACH_EXYNOS_MFC_H
#define __MACH_EXYNOS_MFC_H __FILE__
int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
int depth, void *data);
#endif /* __MACH_EXYNOS_MFC_H */
/*
* Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
*
* Base S5P MFC resource and device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/ioport.h>
#include <linux/of_fdt.h>
#include <linux/of.h>
static struct platform_device s5p_device_mfc_l;
static struct platform_device s5p_device_mfc_r;
struct s5p_mfc_dt_meminfo {
unsigned long loff;
unsigned long lsize;
unsigned long roff;
unsigned long rsize;
char *compatible;
};
struct s5p_mfc_reserved_mem {
phys_addr_t base;
unsigned long size;
struct device *dev;
};
static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
phys_addr_t lbase, unsigned int lsize)
{
int i;
s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
s5p_mfc_mem[0].base = rbase;
s5p_mfc_mem[0].size = rsize;
s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
s5p_mfc_mem[1].base = lbase;
s5p_mfc_mem[1].size = lsize;
for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
if (memblock_remove(area->base, area->size)) {
printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
area->size, (unsigned long) area->base);
area->base = 0;
}
}
}
int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
int depth, void *data)
{
const __be32 *prop;
int len;
struct s5p_mfc_dt_meminfo mfc_mem;
if (!data)
return 0;
if (!of_flat_dt_is_compatible(node, data))
return 0;
prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
if (!prop || (len != 2 * sizeof(unsigned long)))
return 0;
mfc_mem.loff = be32_to_cpu(prop[0]);
mfc_mem.lsize = be32_to_cpu(prop[1]);
prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
if (!prop || (len != 2 * sizeof(unsigned long)))
return 0;
mfc_mem.roff = be32_to_cpu(prop[0]);
mfc_mem.rsize = be32_to_cpu(prop[1]);
s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
mfc_mem.loff, mfc_mem.lsize);
return 1;
}
......@@ -1242,11 +1242,6 @@ static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
static struct lirc_rx51_platform_data rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
.pwm_timer = 9, /* Use GPT 9 for CIR */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
.dmtimer = &pwm_dmtimer_pdata,
#endif
};
static struct platform_device rx51_lirc_device = {
......
......@@ -274,8 +274,6 @@ static struct platform_device omap3_rom_rng_device = {
},
};
static struct platform_device rx51_lirc_device;
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
......@@ -294,10 +292,7 @@ static void __init nokia_n900_legacy_init(void)
pr_info("RX-51: Registering OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
platform_device_register(&rx51_lirc_device);
}
static void __init omap3_tao3530_legacy_init(void)
......@@ -492,10 +487,6 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
.pwm_timer = 9, /* Use GPT 9 for CIR */
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
.dmtimer = &pwm_dmtimer_pdata,
#endif
};
static struct platform_device __maybe_unused rx51_lirc_device = {
......@@ -543,6 +534,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
......
......@@ -2,11 +2,9 @@
# Makefile for the linux kernel, U8500 machine.
#
obj-y := cpu.o id.o pm.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-y := pm.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \
board-mop500-audio.o
obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
......
This diff is collapsed.
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
*
* MOP500 board specific initialization for regulators
*/
#ifndef __BOARD_MOP500_REGULATORS_H
#define __BOARD_MOP500_REGULATORS_H
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
extern struct regulator_init_data tps61052_regulator;
extern struct regulator_init_data gpio_en_3v3_regulator;
void mop500_regulator_init(void);
#endif
/*
* Copyright (C) ST-Ericsson SA 2011
*
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/outercache.h>
#include <asm/hardware/cache-l2x0.h>
#include "db8500-regs.h"
#include "id.h"
static int __init ux500_l2x0_unlock(void)
{
int i;
struct device_node *np;
void __iomem *l2x0_base;
np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
l2x0_base = of_iomap(np, 0);
of_node_put(np);
if (!l2x0_base)
return -ENODEV;
/*
* Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
* apparently locks both caches before jumping to the kernel. The
* l2x0 core will not touch the unlock registers if the l2x0 is
* already enabled, so we do it right here instead. The PL310 has
* 8 sets of registers, one per possible CPU.
*/
for (i = 0; i < 8; i++) {
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
i * L2X0_LOCKDOWN_STRIDE);
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
i * L2X0_LOCKDOWN_STRIDE);
}
iounmap(l2x0_base);
return 0;
}
static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
{
/*
* We can't write to secure registers as we are in non-secure
* mode, until we have some SMI service available.
*/
}
static int __init ux500_l2x0_init(void)
{
/* Multiplatform guard */
if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
return -ENODEV;
/* Unlock before init */
ux500_l2x0_unlock();
outer_cache.write_sec = ux500_l2c310_write_sec;
l2x0_of_init(0, ~0);
return 0;
}
early_initcall(ux500_l2x0_init);
......@@ -12,41 +12,107 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/arm-ux500-pm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/perf/arm_pmu.h>
#include <linux/regulator/machine.h>
#include <linux/random.h>
#include <asm/outercache.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include "setup.h"
#include "board-mop500-regulators.h"
#include "board-mop500.h"
#include "db8500-regs.h"
#include "id.h"
static struct ab8500_platform_data ab8500_platdata = {
.regulator = &ab8500_regulator_plat_data,
};
static int __init ux500_l2x0_unlock(void)
{
int i;
struct device_node *np;
void __iomem *l2x0_base;
static struct prcmu_pdata db8500_prcmu_pdata = {
.ab_platdata = &ab8500_platdata,
.version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
.legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
};
np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
l2x0_base = of_iomap(np, 0);
of_node_put(np);
if (!l2x0_base)
return -ENODEV;
/*
* Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
* apparently locks both caches before jumping to the kernel. The
* l2x0 core will not touch the unlock registers if the l2x0 is
* already enabled, so we do it right here instead. The PL310 has
* 8 sets of registers, one per possible CPU.
*/
for (i = 0; i < 8; i++) {
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
i * L2X0_LOCKDOWN_STRIDE);
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
i * L2X0_LOCKDOWN_STRIDE);
}
iounmap(l2x0_base);
return 0;
}
static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
{
/*
* We can't write to secure registers as we are in non-secure
* mode, until we have some SMI service available.
*/
}
static void __init u8500_map_io(void)
/*
* FIXME: Should we set up the GPIO domain here?
*
* The problem is that we cannot put the interrupt resources into the platform
* device until the irqdomain has been added. Right now, we set the GIC interrupt
* domain from init_irq(), then load the gpio driver from
* core_initcall(nmk_gpio_init) and add the platform devices from
* arch_initcall(customize_machine).
*
* This feels fragile because it depends on the gpio device getting probed
* _before_ any device uses the gpio interrupts.
*/
static void __init ux500_init_irq(void)
{
struct device_node *np;
struct resource r;
irqchip_init();
np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
of_address_to_resource(np, 0, &r);
of_node_put(np);
if (!r.start) {
pr_err("could not find PRCMU base resource\n");
return;
}
prcmu_early_init(r.start, r.end-r.start);
ux500_pm_init(r.start, r.end-r.start);
/* Unlock before init */
ux500_l2x0_unlock();
outer_cache.write_sec = ux500_l2c310_write_sec;
}
static void ux500_restart(enum reboot_mode mode, const char *cmd)
{
debug_ll_io_init();
ux500_setup_id();
local_irq_disable();
local_fiq_disable();
prcmu_system_reset(0);
}
/*
......@@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
static const char *db8500_read_soc_id(void)
{
void __iomem *uid;
const char *retstr;
uid = ioremap(U8500_BB_UID_BASE, 0x20);
if (!uid)
return NULL;
/* Throw these device-specific numbers into the entropy pool */
add_device_randomness(uid, 0x14);
retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+0),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
iounmap(uid);
return retstr;
}
static struct device * __init db8500_soc_device_init(void)
{
const char *soc_id = db8500_read_soc_id();
return ux500_soc_device_init(soc_id);
}
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
......@@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
/* Requires non-DT:able platform data. */
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
......@@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
};
static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
{},
};
......@@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
struct device *parent = db8500_soc_device_init();
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
u8540_auxdata_lookup, parent);
u8540_auxdata_lookup, NULL);
else
of_platform_populate(NULL, u8500_local_bus_nodes,
u8500_auxdata_lookup, parent);
u8500_auxdata_lookup, NULL);
}
static const char * stericsson_dt_platform_compat[] = {
......@@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = {
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
.map_io = u8500_map_io,
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_irq = ux500_init_irq,
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
.restart = ux500_restart,
MACHINE_END
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/sys_soc.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-ux500.h>
#include <linux/platform_data/arm-ux500-pm.h>
#include <asm/mach/map.h>
#include "setup.h"
#include "board-mop500.h"
#include "db8500-regs.h"
#include "id.h"
void ux500_restart(enum reboot_mode mode, const char *cmd)
{
local_irq_disable();
local_fiq_disable();
prcmu_system_reset(0);
}
/*
* FIXME: Should we set up the GPIO domain here?
*
* The problem is that we cannot put the interrupt resources into the platform
* device until the irqdomain has been added. Right now, we set the GIC interrupt
* domain from init_irq(), then load the gpio driver from
* core_initcall(nmk_gpio_init) and add the platform devices from
* arch_initcall(customize_machine).
*
* This feels fragile because it depends on the gpio device getting probed
* _before_ any device uses the gpio interrupts.
*/
void __init ux500_init_irq(void)
{
struct device_node *np;
struct resource r;
irqchip_init();
np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
of_address_to_resource(np, 0, &r);
of_node_put(np);
if (!r.start) {
pr_err("could not find PRCMU base resource\n");
return;
}
prcmu_early_init(r.start, r.end-r.start);
ux500_pm_init(r.start, r.end-r.start);
/*
* Init clocks here so that they are available for system timer
* initialization.
*/
if (cpu_is_u8500_family())
u8500_clk_init();
else if (cpu_is_u9540())
u9540_clk_init();
else if (cpu_is_u8540())
u8540_clk_init();
}
static const char * __init ux500_get_machine(void)
{
return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
}
static const char * __init ux500_get_family(void)
{
return kasprintf(GFP_KERNEL, "ux500");
}
static const char * __init ux500_get_revision(void)
{
unsigned int rev = dbx500_revision();
if (rev == 0x01)
return kasprintf(GFP_KERNEL, "%s", "ED");
else if (rev >= 0xA0)
return kasprintf(GFP_KERNEL, "%d.%d",
(rev >> 4) - 0xA + 1, rev & 0xf);
return kasprintf(GFP_KERNEL, "%s", "Unknown");
}
static ssize_t ux500_get_process(struct device *dev,
struct device_attribute *attr,
char *buf)
{
if (dbx500_id.process == 0x00)
return sprintf(buf, "Standard\n");
return sprintf(buf, "%02xnm\n", dbx500_id.process);
}
static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
const char *soc_id)
{
soc_dev_attr->soc_id = soc_id;
soc_dev_attr->machine = ux500_get_machine();
soc_dev_attr->family = ux500_get_family();
soc_dev_attr->revision = ux500_get_revision();
}
static const struct device_attribute ux500_soc_attr =
__ATTR(process, S_IRUGO, ux500_get_process, NULL);
struct device * __init ux500_soc_device_init(const char *soc_id)
{
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return ERR_PTR(-ENOMEM);
soc_info_populate(soc_dev_attr, soc_id);
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr);
return NULL;
}
parent = soc_device_to_device(soc_dev);
device_create_file(parent, &ux500_soc_attr);
return parent;
}
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef __MACH_UX500_ID
#define __MACH_UX500_ID
/**
* struct dbx500_asic_id - fields of the ASIC ID
* @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
* @partnumber: hithereto 0x8500 for DB8500
* @revision: version code in the series
*/
struct dbx500_asic_id {
u16 partnumber;
u8 revision;
u8 process;
};
extern struct dbx500_asic_id dbx500_id;
static inline unsigned int __attribute_const__ dbx500_partnumber(void)
{
return dbx500_id.partnumber;
}
static inline unsigned int __attribute_const__ dbx500_revision(void)
{
return dbx500_id.revision;
}
/*
* SOCs
*/
static inline bool __attribute_const__ cpu_is_u8500(void)
{
return dbx500_partnumber() == 0x8500;
}
static inline bool __attribute_const__ cpu_is_u8520(void)
{
return dbx500_partnumber() == 0x8520;
}
static inline bool cpu_is_u8500_family(void)
{
return cpu_is_u8500() || cpu_is_u8520();
}
static inline bool __attribute_const__ cpu_is_u9540(void)
{
return dbx500_partnumber() == 0x9540;
}
static inline bool __attribute_const__ cpu_is_u8540(void)
{
return dbx500_partnumber() == 0x8540;
}
static inline bool __attribute_const__ cpu_is_u8580(void)
{
return dbx500_partnumber() == 0x8580;
}
static inline bool cpu_is_ux540_family(void)
{
return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
}
/*
* 8500 revisions
*/
static inline bool __attribute_const__ cpu_is_u8500ed(void)
{
return cpu_is_u8500() && dbx500_revision() == 0x00;
}
static inline bool __attribute_const__ cpu_is_u8500v1(void)
{
return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u8500v10(void)
{
return cpu_is_u8500() && dbx500_revision() == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u8500v11(void)
{
return cpu_is_u8500() && dbx500_revision() == 0xA1;
}
static inline bool __attribute_const__ cpu_is_u8500v2(void)
{
return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
}
static inline bool cpu_is_u8500v20(void)
{
return cpu_is_u8500() && (dbx500_revision() == 0xB0);
}
static inline bool cpu_is_u8500v21(void)
{
return cpu_is_u8500() && (dbx500_revision() == 0xB1);
}
static inline bool cpu_is_u8500v22(void)
{
return cpu_is_u8500() && (dbx500_revision() == 0xB2);
}
static inline bool cpu_is_u8500v20_or_later(void)
{
return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
}
/*
* 8540 revisions
*/
static inline bool __attribute_const__ cpu_is_u8540v10(void)
{
return cpu_is_u8540() && dbx500_revision() == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u8580v10(void)
{
return cpu_is_u8580() && dbx500_revision() == 0xA0;
}
static inline bool ux500_is_svp(void)
{
return false;
}
#define ux500_unknown_soc() BUG()
#endif
......@@ -26,7 +26,6 @@
#include "setup.h"
#include "db8500-regs.h"
#include "id.h"
/* Magic triggers in backup RAM */
#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
......
......@@ -11,18 +11,6 @@
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
#include <asm/mach/arch.h>
#include <linux/init.h>
#include <linux/mfd/abx500/ab8500.h>
void ux500_restart(enum reboot_mode mode, const char *cmd);
void __init ux500_setup_id(void);
extern void __init ux500_init_irq(void);
extern struct device *ux500_soc_device_init(const char *soc_id);
extern void ux500_cpu_die(unsigned int cpu);
#endif /* __ASM_ARCH_SETUP_H */
......@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/hisi,hi6220-resets.h>
#include <dt-bindings/clock/hi6220-clock.h>
#include <dt-bindings/pinctrl/hisi.h>
#include <dt-bindings/thermal/thermal.h>
......@@ -252,6 +253,7 @@ media_ctrl: media_ctrl@f4410000 {
compatible = "hisilicon,hi6220-mediactrl", "syscon";
reg = <0x0 0xf4410000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
pm_ctrl: pm_ctrl@f7032000 {
......
......@@ -132,6 +132,19 @@ config SUNXI_RSB
with various RSB based devices, such as AXP223, AXP8XX PMICs,
and AC100/AC200 ICs.
# TODO: This uses pm_clk_*() symbols that aren't exported in v4.7 and hence
# the driver will fail to build as a module. However there are patches to
# address that queued for v4.8, so this can be turned into a tristate symbol
# after v4.8-rc1.
config TEGRA_ACONNECT
bool "Tegra ACONNECT Bus Driver"
depends on ARCH_TEGRA_210_SOC
depends on OF && PM
select PM_CLK
help
Driver for the Tegra ACONNECT bus which is used to interface with
the devices inside the Audio Processing Engine (APE) for Tegra210.
config UNIPHIER_SYSTEM_BUS
tristate "UniPhier System Bus driver"
depends on ARCH_UNIPHIER && OF
......
......@@ -17,5 +17,6 @@ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
/*
* Tegra ACONNECT Bus Driver
*
* Copyright (C) 2016, NVIDIA CORPORATION. All rights reserved.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_clock.h>
#include <linux/pm_runtime.h>
static int tegra_aconnect_add_clock(struct device *dev, char *name)
{
struct clk *clk;
int ret;
clk = clk_get(dev, name);
if (IS_ERR(clk)) {
dev_err(dev, "%s clock not found\n", name);
return PTR_ERR(clk);
}
ret = pm_clk_add_clk(dev, clk);
if (ret)
clk_put(clk);
return ret;
}
static int tegra_aconnect_probe(struct platform_device *pdev)
{
int ret;
if (!pdev->dev.of_node)
return -EINVAL;
ret = pm_clk_create(&pdev->dev);
if (ret)
return ret;
ret = tegra_aconnect_add_clock(&pdev->dev, "ape");
if (ret)
goto clk_destroy;
ret = tegra_aconnect_add_clock(&pdev->dev, "apb2ape");
if (ret)
goto clk_destroy;
pm_runtime_enable(&pdev->dev);
of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
dev_info(&pdev->dev, "Tegra ACONNECT bus registered\n");
return 0;
clk_destroy:
pm_clk_destroy(&pdev->dev);
return ret;
}
static int tegra_aconnect_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
pm_clk_destroy(&pdev->dev);
return 0;
}
static int tegra_aconnect_runtime_resume(struct device *dev)
{
return pm_clk_resume(dev);
}
static int tegra_aconnect_runtime_suspend(struct device *dev)
{
return pm_clk_suspend(dev);
}
static const struct dev_pm_ops tegra_aconnect_pm_ops = {
SET_RUNTIME_PM_OPS(tegra_aconnect_runtime_suspend,
tegra_aconnect_runtime_resume, NULL)
};
static const struct of_device_id tegra_aconnect_of_match[] = {
{ .compatible = "nvidia,tegra210-aconnect", },
{ }
};
MODULE_DEVICE_TABLE(of, tegra_aconnect_of_match);
static struct platform_driver tegra_aconnect_driver = {
.probe = tegra_aconnect_probe,
.remove = tegra_aconnect_remove,
.driver = {
.name = "tegra-aconnect",
.of_match_table = tegra_aconnect_of_match,
.pm = &tegra_aconnect_pm_ops,
},
};
module_platform_driver(tegra_aconnect_driver);
MODULE_DESCRIPTION("NVIDIA Tegra ACONNECT Bus Driver");
MODULE_AUTHOR("Jon Hunter <jonathanh@nvidia.com>");
MODULE_LICENSE("GPL v2");
......@@ -184,5 +184,5 @@ static void __init clps711x_clk_init_dt(struct device_node *np)
of_clk_add_provider(np, of_clk_src_onecell_get,
&clps711x_clk->clk_data);
}
CLK_OF_DECLARE(clps711x, "cirrus,clps711x-clk", clps711x_clk_init_dt);
CLK_OF_DECLARE(clps711x, "cirrus,ep7209-clk", clps711x_clk_init_dt);
#endif
......@@ -11,7 +11,6 @@
#include <linux/of_address.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
#define PRCC_NUM_PERIPH_CLUSTERS 6
......@@ -48,11 +47,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec,
return PRCC_SHOW(clk_data, base, bit);
}
static const struct of_device_id u8500_clk_of_match[] = {
{ .compatible = "stericsson,u8500-clks", },
{ },
};
/* CLKRST4 is missing making it hard to index things */
enum clkrst_index {
CLKRST1_INDEX = 0,
......@@ -63,22 +57,15 @@ enum clkrst_index {
CLKRST_MAX,
};
void u8500_clk_init(void)
static void u8500_clk_init(struct device_node *np)
{
struct prcmu_fw_version *fw_version;
struct device_node *np = NULL;
struct device_node *child = NULL;
const char *sgaclk_parent = NULL;
struct clk *clk, *rtc_clk, *twd_clk;
u32 bases[CLKRST_MAX];
int i;
if (of_have_populated_dt())
np = of_find_matching_node(NULL, u8500_clk_of_match);
if (!np) {
pr_err("Either DT or U8500 Clock node not found\n");
return;
}
for (i = 0; i < ARRAY_SIZE(bases); i++) {
struct resource r;
......@@ -573,3 +560,4 @@ void u8500_clk_init(void)
of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
}
}
CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init);
......@@ -12,14 +12,8 @@
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
static const struct of_device_id u8540_clk_of_match[] = {
{ .compatible = "stericsson,u8540-clks", },
{ }
};
/* CLKRST4 is missing making it hard to index things */
enum clkrst_index {
CLKRST1_INDEX = 0,
......@@ -30,19 +24,12 @@ enum clkrst_index {
CLKRST_MAX,
};
void u8540_clk_init(void)
static void u8540_clk_init(struct device_node *np)
{
struct clk *clk;
struct device_node *np = NULL;
u32 bases[CLKRST_MAX];
int i;
if (of_have_populated_dt())
np = of_find_matching_node(NULL, u8540_clk_of_match);
if (!np) {
pr_err("Either DT or U8540 Clock node not found\n");
return;
}
for (i = 0; i < ARRAY_SIZE(bases); i++) {
struct resource r;
......@@ -607,3 +594,4 @@ void u8540_clk_init(void)
bases[CLKRST6_INDEX], BIT(0), CLK_SET_RATE_GATE);
clk_register_clkdev(clk, NULL, "rng");
}
CLK_OF_DECLARE(u8540_clks, "stericsson,u8540-clks", u8540_clk_init);
......@@ -9,10 +9,10 @@
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
void u9540_clk_init(void)
static void u9540_clk_init(struct device_node *np)
{
/* register clocks here */
}
CLK_OF_DECLARE(u9540_clks, "stericsson,u9540-clks", u9540_clk_init);
......@@ -119,5 +119,5 @@ static int __init clps711x_timer_init(struct device_node *np)
return -EINVAL;
}
}
CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init);
CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);
#endif
......@@ -220,7 +220,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
tmp1 /= tmp;
__raw_writel(tmp1, reg);
writel_relaxed(tmp1, reg);
}
static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
......@@ -296,29 +296,29 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* 1. Temporary Change divider for MFC and G3D
* SCLKA2M(200/1=200)->(200/4=50)Mhz
*/
reg = __raw_readl(S5P_CLK_DIV2);
reg = readl_relaxed(S5P_CLK_DIV2);
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
(3 << S5P_CLKDIV2_MFC_SHIFT);
__raw_writel(reg, S5P_CLK_DIV2);
writel_relaxed(reg, S5P_CLK_DIV2);
/* For MFC, G3D dividing */
do {
reg = __raw_readl(S5P_CLKDIV_STAT0);
reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & ((1 << 16) | (1 << 17)));
/*
* 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
* (200/4=50)->(667/4=166)Mhz
*/
reg = __raw_readl(S5P_CLK_SRC2);
reg = readl_relaxed(S5P_CLK_SRC2);
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
(1 << S5P_CLKSRC2_MFC_SHIFT);
__raw_writel(reg, S5P_CLK_SRC2);
writel_relaxed(reg, S5P_CLK_SRC2);
do {
reg = __raw_readl(S5P_CLKMUX_STAT1);
reg = readl_relaxed(S5P_CLKMUX_STAT1);
} while (reg & ((1 << 7) | (1 << 3)));
/*
......@@ -330,19 +330,19 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
s5pv210_set_refresh(DMC1, 133000);
/* 4. SCLKAPLL -> SCLKMPLL */
reg = __raw_readl(S5P_CLK_SRC0);
reg = readl_relaxed(S5P_CLK_SRC0);
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
__raw_writel(reg, S5P_CLK_SRC0);
writel_relaxed(reg, S5P_CLK_SRC0);
do {
reg = __raw_readl(S5P_CLKMUX_STAT0);
reg = readl_relaxed(S5P_CLKMUX_STAT0);
} while (reg & (0x1 << 18));
}
/* Change divider */
reg = __raw_readl(S5P_CLK_DIV0);
reg = readl_relaxed(S5P_CLK_DIV0);
reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
......@@ -358,25 +358,25 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
__raw_writel(reg, S5P_CLK_DIV0);
writel_relaxed(reg, S5P_CLK_DIV0);
do {
reg = __raw_readl(S5P_CLKDIV_STAT0);
reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & 0xff);
/* ARM MCS value changed */
reg = __raw_readl(S5P_ARM_MCS_CON);
reg = readl_relaxed(S5P_ARM_MCS_CON);
reg &= ~0x3;
if (index >= L3)
reg |= 0x3;
else
reg |= 0x1;
__raw_writel(reg, S5P_ARM_MCS_CON);
writel_relaxed(reg, S5P_ARM_MCS_CON);
if (pll_changing) {
/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
__raw_writel(0x2cf, S5P_APLL_LOCK);
writel_relaxed(0x2cf, S5P_APLL_LOCK);
/*
* 6. Turn on APLL
......@@ -384,12 +384,12 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* 6-2. Wait untile the PLL is locked
*/
if (index == L0)
__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
else
__raw_writel(APLL_VAL_800, S5P_APLL_CON);
writel_relaxed(APLL_VAL_800, S5P_APLL_CON);
do {
reg = __raw_readl(S5P_APLL_CON);
reg = readl_relaxed(S5P_APLL_CON);
} while (!(reg & (0x1 << 29)));
/*
......@@ -397,39 +397,39 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
* (667/4=166)->(200/4=50)Mhz
*/
reg = __raw_readl(S5P_CLK_SRC2);
reg = readl_relaxed(S5P_CLK_SRC2);
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
(0 << S5P_CLKSRC2_MFC_SHIFT);
__raw_writel(reg, S5P_CLK_SRC2);
writel_relaxed(reg, S5P_CLK_SRC2);
do {
reg = __raw_readl(S5P_CLKMUX_STAT1);
reg = readl_relaxed(S5P_CLKMUX_STAT1);
} while (reg & ((1 << 7) | (1 << 3)));
/*
* 8. Change divider for MFC and G3D
* (200/4=50)->(200/1=200)Mhz
*/
reg = __raw_readl(S5P_CLK_DIV2);
reg = readl_relaxed(S5P_CLK_DIV2);
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
__raw_writel(reg, S5P_CLK_DIV2);
writel_relaxed(reg, S5P_CLK_DIV2);
/* For MFC, G3D dividing */
do {
reg = __raw_readl(S5P_CLKDIV_STAT0);
reg = readl_relaxed(S5P_CLKDIV_STAT0);
} while (reg & ((1 << 16) | (1 << 17)));
/* 9. Change MPLL to APLL in MSYS_MUX */
reg = __raw_readl(S5P_CLK_SRC0);
reg = readl_relaxed(S5P_CLK_SRC0);
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
__raw_writel(reg, S5P_CLK_SRC0);
writel_relaxed(reg, S5P_CLK_SRC0);
do {
reg = __raw_readl(S5P_CLKMUX_STAT0);
reg = readl_relaxed(S5P_CLKMUX_STAT0);
} while (reg & (0x1 << 18));
/*
......@@ -446,13 +446,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
* and memory refresh parameter should be changed
*/
if (bus_speed_changing) {
reg = __raw_readl(S5P_CLK_DIV6);
reg = readl_relaxed(S5P_CLK_DIV6);
reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
__raw_writel(reg, S5P_CLK_DIV6);
writel_relaxed(reg, S5P_CLK_DIV6);
do {
reg = __raw_readl(S5P_CLKDIV_STAT1);
reg = readl_relaxed(S5P_CLKDIV_STAT1);
} while (reg & (1 << 15));
/* Reconfigure DRAM refresh counter value */
......@@ -492,7 +492,7 @@ static int check_mem_type(void __iomem *dmc_reg)
{
unsigned long val;
val = __raw_readl(dmc_reg + 0x4);
val = readl_relaxed(dmc_reg + 0x4);
val = (val & (0xf << 8));
return val >> 8;
......@@ -537,10 +537,10 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy)
}
/* Find current refresh counter and frequency each DMC */
s5pv210_dram_conf[0].refresh = (__raw_readl(dmc_base[0] + 0x30) * 1000);
s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000);
s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
s5pv210_dram_conf[1].refresh = (__raw_readl(dmc_base[1] + 0x30) * 1000);
s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000);
s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
policy->suspend_freq = SLEEP_FREQ;
......
......@@ -10,7 +10,7 @@ config ARM_PSCI_FW
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
depends on ARM_MHU
depends on MAILBOX
help
System Control and Power Interface (SCPI) Message Protocol is
defined for the purpose of communication between the Application
......@@ -27,6 +27,15 @@ config ARM_SCPI_PROTOCOL
This protocol library provides interface for all the client drivers
making use of the features offered by the SCP.
config ARM_SCPI_POWER_DOMAIN
tristate "SCPI power domain driver"
depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
default y
select PM_GENERIC_DOMAINS if PM
help
This enables support for the SCPI power domains which can be
enabled or disabled via the SCP firmware
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
......@@ -184,6 +193,7 @@ config FW_CFG_SYSFS_CMDLINE
config QCOM_SCM
bool
depends on ARM || ARM64
select RESET_CONTROLLER
config QCOM_SCM_32
def_bool y
......
......@@ -3,6 +3,7 @@
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
......
......@@ -210,10 +210,6 @@ struct dvfs_info {
} opps[MAX_DVFS_OPPS];
} __packed;
struct dvfs_get {
u8 index;
} __packed;
struct dvfs_set {
u8 domain;
u8 index;
......@@ -235,6 +231,11 @@ struct sensor_value {
__le32 hi_val;
} __packed;
struct dev_pstate_set {
u16 dev_id;
u8 pstate;
} __packed;
static struct scpi_drvinfo *scpi_info;
static int scpi_linux_errmap[SCPI_ERR_MAX] = {
......@@ -431,11 +432,11 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
static int scpi_dvfs_get_idx(u8 domain)
{
int ret;
struct dvfs_get dvfs;
u8 dvfs_idx;
ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain),
&dvfs, sizeof(dvfs));
return ret ? ret : dvfs.index;
&dvfs_idx, sizeof(dvfs_idx));
return ret ? ret : dvfs_idx;
}
static int scpi_dvfs_set_idx(u8 domain, u8 index)
......@@ -526,7 +527,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
return ret;
}
int scpi_sensor_get_value(u16 sensor, u64 *val)
static int scpi_sensor_get_value(u16 sensor, u64 *val)
{
__le16 id = cpu_to_le16(sensor);
struct sensor_value buf;
......@@ -541,6 +542,29 @@ int scpi_sensor_get_value(u16 sensor, u64 *val)
return ret;
}
static int scpi_device_get_power_state(u16 dev_id)
{
int ret;
u8 pstate;
__le16 id = cpu_to_le16(dev_id);
ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id,
sizeof(id), &pstate, sizeof(pstate));
return ret ? ret : pstate;
}
static int scpi_device_set_power_state(u16 dev_id, u8 pstate)
{
int stat;
struct dev_pstate_set dev_set = {
.dev_id = cpu_to_le16(dev_id),
.pstate = pstate,
};
return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set,
sizeof(dev_set), &stat, sizeof(stat));
}
static struct scpi_ops scpi_ops = {
.get_version = scpi_get_version,
.clk_get_range = scpi_clk_get_range,
......@@ -552,6 +576,8 @@ static struct scpi_ops scpi_ops = {
.sensor_get_capability = scpi_sensor_get_capability,
.sensor_get_info = scpi_sensor_get_info,
.sensor_get_value = scpi_sensor_get_value,
.device_get_power_state = scpi_device_get_power_state,
.device_set_power_state = scpi_device_set_power_state,
};
struct scpi_ops *get_scpi_ops(void)
......
This diff is collapsed.
......@@ -12,7 +12,150 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <linux/arm-smccc.h>
#include <linux/dma-mapping.h>
#include "qcom_scm.h"
#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
#define MAX_QCOM_SCM_ARGS 10
#define MAX_QCOM_SCM_RETS 3
enum qcom_scm_arg_types {
QCOM_SCM_VAL,
QCOM_SCM_RO,
QCOM_SCM_RW,
QCOM_SCM_BUFVAL,
};
#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
(((a) & 0x3) << 4) | \
(((b) & 0x3) << 6) | \
(((c) & 0x3) << 8) | \
(((d) & 0x3) << 10) | \
(((e) & 0x3) << 12) | \
(((f) & 0x3) << 14) | \
(((g) & 0x3) << 16) | \
(((h) & 0x3) << 18) | \
(((i) & 0x3) << 20) | \
(((j) & 0x3) << 22) | \
((num) & 0xf))
#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
/**
* struct qcom_scm_desc
* @arginfo: Metadata describing the arguments in args[]
* @args: The array of arguments for the secure syscall
* @res: The values returned by the secure syscall
*/
struct qcom_scm_desc {
u32 arginfo;
u64 args[MAX_QCOM_SCM_ARGS];
};
static u64 qcom_smccc_convention = -1;
static DEFINE_MUTEX(qcom_scm_lock);
#define QCOM_SCM_EBUSY_WAIT_MS 30
#define QCOM_SCM_EBUSY_MAX_RETRY 20
#define N_EXT_QCOM_SCM_ARGS 7
#define FIRST_EXT_ARG_IDX 3
#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)
/**
* qcom_scm_call() - Invoke a syscall in the secure world
* @dev: device
* @svc_id: service identifier
* @cmd_id: command identifier
* @desc: Descriptor structure containing arguments and return values
*
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
const struct qcom_scm_desc *desc,
struct arm_smccc_res *res)
{
int arglen = desc->arginfo & 0xf;
int retry_count = 0, i;
u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
dma_addr_t args_phys = 0;
void *args_virt = NULL;
size_t alloc_len;
if (unlikely(arglen > N_REGISTER_ARGS)) {
alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
if (!args_virt)
return -ENOMEM;
if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
__le32 *args = args_virt;
for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
args[i] = cpu_to_le32(desc->args[i +
FIRST_EXT_ARG_IDX]);
} else {
__le64 *args = args_virt;
for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
args[i] = cpu_to_le64(desc->args[i +
FIRST_EXT_ARG_IDX]);
}
args_phys = dma_map_single(dev, args_virt, alloc_len,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, args_phys)) {
kfree(args_virt);
return -ENOMEM;
}
x5 = args_phys;
}
do {
mutex_lock(&qcom_scm_lock);
cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
qcom_smccc_convention,
ARM_SMCCC_OWNER_SIP, fn_id);
do {
arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
desc->args[1], desc->args[2], x5, 0, 0,
res);
} while (res->a0 == QCOM_SCM_INTERRUPTED);
mutex_unlock(&qcom_scm_lock);
if (res->a0 == QCOM_SCM_V2_EBUSY) {
if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
break;
msleep(QCOM_SCM_EBUSY_WAIT_MS);
}
} while (res->a0 == QCOM_SCM_V2_EBUSY);
if (args_virt) {
dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
kfree(args_virt);
}
if (res->a0 < 0)
return qcom_scm_remap_error(res->a0);
return 0;
}
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
......@@ -29,13 +172,15 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
* @dev: Device pointer
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus)
{
return -ENOTSUPP;
}
......@@ -52,12 +197,164 @@ void __qcom_scm_cpu_power_down(u32 flags)
{
}
int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
return -ENOTSUPP;
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.arginfo = QCOM_SCM_ARGS(1);
desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
&desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
u32 req_cnt, u32 *resp)
{
return -ENOTSUPP;
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
desc.args[0] = req[0].addr;
desc.args[1] = req[0].val;
desc.args[2] = req[1].addr;
desc.args[3] = req[1].val;
desc.args[4] = req[2].addr;
desc.args[5] = req[2].val;
desc.args[6] = req[3].addr;
desc.args[7] = req[3].val;
desc.args[8] = req[4].addr;
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
&res);
*resp = res.a1;
return ret;
}
void __qcom_scm_init(void)
{
u64 cmd;
struct arm_smccc_res res;
u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
/* First try a SMC64 call */
cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
ARM_SMCCC_OWNER_SIP, function);
arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
0, 0, 0, 0, 0, &res);
if (!res.a0 && res.a1)
qcom_smccc_convention = ARM_SMCCC_SMC_64;
else
qcom_smccc_convention = ARM_SMCCC_SMC_32;
}
bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
{
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
QCOM_SCM_PAS_IS_SUPPORTED_CMD,
&desc, &res);
return ret ? false : !!res.a1;
}
int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
dma_addr_t metadata_phys)
{
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.args[1] = metadata_phys;
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
&desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
phys_addr_t addr, phys_addr_t size)
{
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.args[1] = addr;
desc.args[2] = size;
desc.arginfo = QCOM_SCM_ARGS(3);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
&desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
{
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
&desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
{
int ret;
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
&desc, &res);
return ret ? : res.a1;
}
int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
{
struct qcom_scm_desc desc = {0};
struct arm_smccc_res res;
int ret;
desc.args[0] = reset;
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
&res);
return ret ? : res.a1;
}
......@@ -10,19 +10,64 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
#include "qcom_scm.h"
struct qcom_scm {
struct device *dev;
struct clk *core_clk;
struct clk *iface_clk;
struct clk *bus_clk;
struct reset_controller_dev reset;
};
static struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
{
int ret;
ret = clk_prepare_enable(__scm->core_clk);
if (ret)
goto bail;
ret = clk_prepare_enable(__scm->iface_clk);
if (ret)
goto disable_core;
ret = clk_prepare_enable(__scm->bus_clk);
if (ret)
goto disable_iface;
return 0;
disable_iface:
clk_disable_unprepare(__scm->iface_clk);
disable_core:
clk_disable_unprepare(__scm->core_clk);
bail:
return ret;
}
static void qcom_scm_clk_disable(void)
{
clk_disable_unprepare(__scm->core_clk);
clk_disable_unprepare(__scm->iface_clk);
clk_disable_unprepare(__scm->bus_clk);
}
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
......@@ -47,7 +92,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
return __qcom_scm_set_warm_boot_addr(entry, cpus);
return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
......@@ -72,12 +117,17 @@ EXPORT_SYMBOL(qcom_scm_cpu_power_down);
*/
bool qcom_scm_hdcp_available(void)
{
int ret;
int ret = qcom_scm_clk_enable();
ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
QCOM_SCM_CMD_HDCP);
if (ret)
return ret;
return (ret > 0) ? true : false;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
QCOM_SCM_CMD_HDCP);
qcom_scm_clk_disable();
return ret > 0 ? true : false;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
......@@ -91,6 +141,287 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
return __qcom_scm_hdcp_req(req, req_cnt, resp);
int ret = qcom_scm_clk_enable();
if (ret)
return ret;
ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
qcom_scm_clk_disable();
return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);
/**
* qcom_scm_pas_supported() - Check if the peripheral authentication service is
* available for the given peripherial
* @peripheral: peripheral id
*
* Returns true if PAS is supported for this peripheral, otherwise false.
*/
bool qcom_scm_pas_supported(u32 peripheral)
{
int ret;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
QCOM_SCM_PAS_IS_SUPPORTED_CMD);
if (ret <= 0)
return false;
return __qcom_scm_pas_supported(__scm->dev, peripheral);
}
EXPORT_SYMBOL(qcom_scm_pas_supported);
/**
* qcom_scm_pas_init_image() - Initialize peripheral authentication service
* state machine for a given peripheral, using the
* metadata
* @peripheral: peripheral id
* @metadata: pointer to memory containing ELF header, program header table
* and optional blob of data used for authenticating the metadata
* and the rest of the firmware
* @size: size of the metadata
*
* Returns 0 on success.
*/
int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
{
dma_addr_t mdata_phys;
void *mdata_buf;
int ret;
/*
* During the scm call memory protection will be enabled for the meta
* data blob, so make sure it's physically contiguous, 4K aligned and
* non-cachable to avoid XPU violations.
*/
mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
GFP_KERNEL);
if (!mdata_buf) {
dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
return -ENOMEM;
}
memcpy(mdata_buf, metadata, size);
ret = qcom_scm_clk_enable();
if (ret)
goto free_metadata;
ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
qcom_scm_clk_disable();
free_metadata:
dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
return ret;
}
EXPORT_SYMBOL(qcom_scm_pas_init_image);
/**
* qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
* for firmware loading
* @peripheral: peripheral id
* @addr: start address of memory area to prepare
* @size: size of the memory area to prepare
*
* Returns 0 on success.
*/
int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
{
int ret;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
qcom_scm_clk_disable();
return ret;
}
EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
/**
* qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
* and reset the remote processor
* @peripheral: peripheral id
*
* Return 0 on success.
*/
int qcom_scm_pas_auth_and_reset(u32 peripheral)
{
int ret;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
qcom_scm_clk_disable();
return ret;
}
EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
/**
* qcom_scm_pas_shutdown() - Shut down the remote processor
* @peripheral: peripheral id
*
* Returns 0 on success.
*/
int qcom_scm_pas_shutdown(u32 peripheral)
{
int ret;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
qcom_scm_clk_disable();
return ret;
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);
static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
if (idx != 0)
return -EINVAL;
return __qcom_scm_pas_mss_reset(__scm->dev, 1);
}
static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
if (idx != 0)
return -EINVAL;
return __qcom_scm_pas_mss_reset(__scm->dev, 0);
}
static const struct reset_control_ops qcom_scm_pas_reset_ops = {
.assert = qcom_scm_pas_reset_assert,
.deassert = qcom_scm_pas_reset_deassert,
};
/**
* qcom_scm_is_available() - Checks if SCM is available
*/
bool qcom_scm_is_available(void)
{
return !!__scm;
}
EXPORT_SYMBOL(qcom_scm_is_available);
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
int ret;
scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
if (!scm)
return -ENOMEM;
scm->core_clk = devm_clk_get(&pdev->dev, "core");
if (IS_ERR(scm->core_clk)) {
if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
return PTR_ERR(scm->core_clk);
scm->core_clk = NULL;
}
if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(scm->iface_clk)) {
if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to acquire iface clk\n");
return PTR_ERR(scm->iface_clk);
}
scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
if (IS_ERR(scm->bus_clk)) {
if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to acquire bus clk\n");
return PTR_ERR(scm->bus_clk);
}
}
scm->reset.ops = &qcom_scm_pas_reset_ops;
scm->reset.nr_resets = 1;
scm->reset.of_node = pdev->dev.of_node;
reset_controller_register(&scm->reset);
/* vote for max clk rate for highest performance */
ret = clk_set_rate(scm->core_clk, INT_MAX);
if (ret)
return ret;
__scm = scm;
__scm->dev = &pdev->dev;
__qcom_scm_init();
return 0;
}
static const struct of_device_id qcom_scm_dt_match[] = {
{ .compatible = "qcom,scm-apq8064",},
{ .compatible = "qcom,scm-msm8660",},
{ .compatible = "qcom,scm-msm8960",},
{ .compatible = "qcom,scm",},
{}
};
MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
static struct platform_driver qcom_scm_driver = {
.driver = {
.name = "qcom_scm",
.of_match_table = qcom_scm_dt_match,
},
.probe = qcom_scm_probe,
};
static int __init qcom_scm_init(void)
{
struct device_node *np, *fw_np;
int ret;
fw_np = of_find_node_by_name(NULL, "firmware");
if (!fw_np)
return -ENODEV;
np = of_find_matching_node(fw_np, qcom_scm_dt_match);
if (!np) {
of_node_put(fw_np);
return -ENODEV;
}
of_node_put(np);
ret = of_platform_populate(fw_np, qcom_scm_dt_match, NULL, NULL);
of_node_put(fw_np);
if (ret)
return ret;
return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);
static void __exit qcom_scm_exit(void)
{
platform_driver_unregister(&qcom_scm_driver);
}
module_exit(qcom_scm_exit);
MODULE_DESCRIPTION("Qualcomm SCM driver");
MODULE_LICENSE("GPL v2");
......@@ -19,7 +19,8 @@
#define QCOM_SCM_FLAG_HLOS 0x01
#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_CMD_TERMINATE_PC 0x2
......@@ -29,14 +30,34 @@ extern void __qcom_scm_cpu_power_down(u32 flags);
#define QCOM_SCM_SVC_INFO 0x6
#define QCOM_IS_CALL_AVAIL_CMD 0x1
extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
u32 cmd_id);
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_CMD_HDCP 0x01
extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
extern int __qcom_scm_hdcp_req(struct device *dev,
struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
extern void __qcom_scm_init(void);
#define QCOM_SCM_SVC_PIL 0x2
#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
#define QCOM_SCM_PAS_MSS_RESET 0xa
extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
dma_addr_t metadata_phys);
extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
phys_addr_t addr, phys_addr_t size);
extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
/* common error codes */
#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
......@@ -44,4 +65,22 @@ extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
static inline int qcom_scm_remap_error(int err)
{
switch (err) {
case QCOM_SCM_ERROR:
return -EIO;
case QCOM_SCM_EINVAL_ADDR:
case QCOM_SCM_EINVAL_ARG:
return -EINVAL;
case QCOM_SCM_EOPNOTSUPP:
return -EOPNOTSUPP;
case QCOM_SCM_ENOMEM:
return -ENOMEM;
case QCOM_SCM_V2_EBUSY:
return -EBUSY;
}
return -EINVAL;
}
#endif
/*
* SCPI Generic power domain support.
*
* Copyright (C) 2016 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/pm_domain.h>
#include <linux/scpi_protocol.h>
struct scpi_pm_domain {
struct generic_pm_domain genpd;
struct scpi_ops *ops;
u32 domain;
char name[30];
};
/*
* These device power state values are not well-defined in the specification.
* In case, different implementations use different values, we can make these
* specific to compatibles rather than getting these values from device tree.
*/
enum scpi_power_domain_state {
SCPI_PD_STATE_ON = 0,
SCPI_PD_STATE_OFF = 3,
};
#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd)
static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on)
{
int ret;
enum scpi_power_domain_state state;
if (power_on)
state = SCPI_PD_STATE_ON;
else
state = SCPI_PD_STATE_OFF;
ret = pd->ops->device_set_power_state(pd->domain, state);
if (ret)
return ret;
return !(state == pd->ops->device_get_power_state(pd->domain));
}
static int scpi_pd_power_on(struct generic_pm_domain *domain)
{
struct scpi_pm_domain *pd = to_scpi_pd(domain);
return scpi_pd_power(pd, true);
}
static int scpi_pd_power_off(struct generic_pm_domain *domain)
{
struct scpi_pm_domain *pd = to_scpi_pd(domain);
return scpi_pd_power(pd, false);
}
static int scpi_pm_domain_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct scpi_pm_domain *scpi_pd;
struct genpd_onecell_data *scpi_pd_data;
struct generic_pm_domain **domains;
struct scpi_ops *scpi_ops;
int ret, num_domains, i;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
return -EPROBE_DEFER;
if (!np) {
dev_err(dev, "device tree node not found\n");
return -ENODEV;
}
if (!scpi_ops->device_set_power_state ||
!scpi_ops->device_get_power_state) {
dev_err(dev, "power domains not supported in the firmware\n");
return -ENODEV;
}
ret = of_property_read_u32(np, "num-domains", &num_domains);
if (ret) {
dev_err(dev, "number of domains not found\n");
return -EINVAL;
}
scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL);
if (!scpi_pd)
return -ENOMEM;
scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL);
if (!scpi_pd_data)
return -ENOMEM;
domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
if (!domains)
return -ENOMEM;
for (i = 0; i < num_domains; i++, scpi_pd++) {
domains[i] = &scpi_pd->genpd;
scpi_pd->domain = i;
scpi_pd->ops = scpi_ops;
sprintf(scpi_pd->name, "%s.%d", np->name, i);
scpi_pd->genpd.name = scpi_pd->name;
scpi_pd->genpd.power_off = scpi_pd_power_off;
scpi_pd->genpd.power_on = scpi_pd_power_on;
/*
* Treat all power domains as off at boot.
*
* The SCP firmware itself may have switched on some domains,
* but for reference counting purpose, keep it this way.
*/
pm_genpd_init(&scpi_pd->genpd, NULL, true);
}
scpi_pd_data->domains = domains;
scpi_pd_data->num_domains = num_domains;
of_genpd_add_provider_onecell(np, scpi_pd_data);
return 0;
}
static const struct of_device_id scpi_power_domain_ids[] = {
{ .compatible = "arm,scpi-power-domains", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, scpi_power_domain_ids);
static struct platform_driver scpi_power_domain_driver = {
.driver = {
.name = "scpi_power_domain",
.of_match_table = scpi_power_domain_ids,
},
.probe = scpi_pm_domain_probe,
};
module_platform_driver(scpi_power_domain_driver);
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCPI power domain driver");
MODULE_LICENSE("GPL v2");
......@@ -101,7 +101,7 @@ static int clps711x_keypad_probe(struct platform_device *pdev)
return -ENOMEM;
priv->syscon =
syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1");
syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon1");
if (IS_ERR(priv->syscon))
return PTR_ERR(priv->syscon);
......@@ -181,7 +181,7 @@ static int clps711x_keypad_remove(struct platform_device *pdev)
}
static const struct of_device_id clps711x_keypad_of_match[] = {
{ .compatible = "cirrus,clps711x-keypad", },
{ .compatible = "cirrus,ep7209-keypad", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match);
......
......@@ -234,5 +234,5 @@ static int __init clps711x_intc_init_dt(struct device_node *np,
return _clps711x_intc_init(np, res.start, resource_size(&res));
}
IRQCHIP_DECLARE(clps711x, "cirrus,clps711x-intc", clps711x_intc_init_dt);
IRQCHIP_DECLARE(clps711x, "cirrus,ep7209-intc", clps711x_intc_init_dt);
#endif
......@@ -336,7 +336,7 @@ config IR_TTUSBIR
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
depends on OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS && LIRC
---help---
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
......
This diff is collapsed.
......@@ -25,6 +25,17 @@ config ATMEL_SDRAMC
Starting with the at91sam9g45, this controller supports SDR, DDR and
LP-DDR memories.
config ATMEL_EBI
bool "Atmel EBI driver"
default y
depends on ARCH_AT91 && OF
select MFD_SYSCON
help
Driver for Atmel EBI controller.
Used to configure the EBI (external bus interface) when the device-
tree is used. This bus supports NANDs, external ethernet controller,
SRAMs, ATA devices, etc.
config TI_AEMIF
tristate "Texas Instruments AEMIF driver"
depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
......
......@@ -7,6 +7,7 @@ obj-$(CONFIG_OF) += of_memory.o
endif
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
......
This diff is collapsed.
/*
* Atmel (Multi-port DDR-)SDRAM Controller driver
*
* Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
*
* Copyright (C) 2014 Atmel
*
* This program is free software: you can redistribute it and/or modify
......@@ -20,7 +22,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
......@@ -48,7 +50,6 @@ static const struct of_device_id atmel_ramc_of_match[] = {
{ .compatible = "atmel,sama5d3-ddramc", .data = &sama5d3_caps, },
{},
};
MODULE_DEVICE_TABLE(of, atmel_ramc_of_match);
static int atmel_ramc_probe(struct platform_device *pdev)
{
......@@ -90,8 +91,4 @@ static int __init atmel_ramc_init(void)
{
return platform_driver_register(&atmel_ramc_driver);
}
module_init(atmel_ramc_init);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller");
device_initcall(atmel_ramc_init);
......@@ -20,7 +20,6 @@
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
......@@ -1807,7 +1806,6 @@ static const struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,am3352-gpmc" }, /* am335x devices */
{ }
};
MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
/**
* gpmc_read_settings_dt - read gpmc settings from device-tree
......@@ -2154,68 +2152,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
return ret;
}
static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
{
return 1; /* we're input only */
}
static int gpmc_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
return 0; /* we're input only */
}
static int gpmc_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
return -EINVAL; /* we're input only */
}
static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
}
static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
u32 reg;
offset += 8;
reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset);
return !!reg;
}
static int gpmc_gpio_init(struct gpmc_device *gpmc)
{
int ret;
gpmc->gpio_chip.parent = gpmc->dev;
gpmc->gpio_chip.owner = THIS_MODULE;
gpmc->gpio_chip.label = DEVICE_NAME;
gpmc->gpio_chip.ngpio = gpmc_nr_waitpins;
gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction;
gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input;
gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output;
gpmc->gpio_chip.set = gpmc_gpio_set;
gpmc->gpio_chip.get = gpmc_gpio_get;
gpmc->gpio_chip.base = -1;
ret = gpiochip_add(&gpmc->gpio_chip);
if (ret < 0) {
dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
return ret;
}
return 0;
}
static void gpmc_gpio_exit(struct gpmc_device *gpmc)
{
gpiochip_remove(&gpmc->gpio_chip);
}
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
......@@ -2280,7 +2216,69 @@ static int gpmc_probe_dt_children(struct platform_device *pdev)
{
return 0;
}
#endif
#endif /* CONFIG_OF */
static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
{
return 1; /* we're input only */
}
static int gpmc_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
return 0; /* we're input only */
}
static int gpmc_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
return -EINVAL; /* we're input only */
}
static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
}
static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
u32 reg;
offset += 8;
reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset);
return !!reg;
}
static int gpmc_gpio_init(struct gpmc_device *gpmc)
{
int ret;
gpmc->gpio_chip.parent = gpmc->dev;
gpmc->gpio_chip.owner = THIS_MODULE;
gpmc->gpio_chip.label = DEVICE_NAME;
gpmc->gpio_chip.ngpio = gpmc_nr_waitpins;
gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction;
gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input;
gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output;
gpmc->gpio_chip.set = gpmc_gpio_set;
gpmc->gpio_chip.get = gpmc_gpio_get;
gpmc->gpio_chip.base = -1;
ret = gpiochip_add(&gpmc->gpio_chip);
if (ret < 0) {
dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
return ret;
}
return 0;
}
static void gpmc_gpio_exit(struct gpmc_device *gpmc)
{
gpiochip_remove(&gpmc->gpio_chip);
}
static int gpmc_probe(struct platform_device *pdev)
{
......@@ -2436,15 +2434,7 @@ static __init int gpmc_init(void)
{
return platform_driver_register(&gpmc_driver);
}
static __exit void gpmc_exit(void)
{
platform_driver_unregister(&gpmc_driver);
}
postcore_initcall(gpmc_init);
module_exit(gpmc_exit);
static struct omap3_gpmc_regs gpmc_context;
......
......@@ -11,7 +11,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
......@@ -91,17 +91,17 @@ static int exynos_srom_configure_bank(struct exynos_srom *srom,
if (width == 2)
cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
bw = __raw_readl(srom->reg_base + EXYNOS_SROM_BW);
bw = readl_relaxed(srom->reg_base + EXYNOS_SROM_BW);
bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank);
__raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW);
writel_relaxed(bw, srom->reg_base + EXYNOS_SROM_BW);
__raw_writel(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
(timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
(timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
(timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
(timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
(timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
srom->reg_base + EXYNOS_SROM_BC0 + bank);
writel_relaxed(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
(timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
(timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
(timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
(timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
(timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
srom->reg_base + EXYNOS_SROM_BC0 + bank);
return 0;
}
......@@ -134,7 +134,7 @@ static int exynos_srom_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, srom);
srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets,
sizeof(exynos_srom_offsets));
ARRAY_SIZE(exynos_srom_offsets));
if (!srom->reg_offset) {
iounmap(srom->reg_base);
return -ENOMEM;
......@@ -159,16 +159,6 @@ static int exynos_srom_probe(struct platform_device *pdev)
return of_platform_populate(np, NULL, NULL, dev);
}
static int exynos_srom_remove(struct platform_device *pdev)
{
struct exynos_srom *srom = platform_get_drvdata(pdev);
kfree(srom->reg_offset);
iounmap(srom->reg_base);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static void exynos_srom_save(void __iomem *base,
struct exynos_srom_reg_dump *rd,
......@@ -211,21 +201,16 @@ static const struct of_device_id of_exynos_srom_ids[] = {
},
{},
};
MODULE_DEVICE_TABLE(of, of_exynos_srom_ids);
static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
static struct platform_driver exynos_srom_driver = {
.probe = exynos_srom_probe,
.remove = exynos_srom_remove,
.driver = {
.name = "exynos-srom",
.of_match_table = of_exynos_srom_ids,
.pm = &exynos_srom_pm_ops,
.suppress_bind_attrs = true,
},
};
module_platform_driver(exynos_srom_driver);
MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
MODULE_DESCRIPTION("Exynos SROM Controller Driver");
MODULE_LICENSE("GPL");
builtin_platform_driver(exynos_srom_driver);
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment