Commit 43f2cfcc authored by Scott Wood's avatar Scott Wood

Merge branch 'clock' into HEAD

This is a major overhaul of the clk-qoriq driver, which I'm merging
via PPC with Stephen Boyd's ack in order to apply subsequent PPC patches
that depend on it.
parents 9d28cc81 e994412c
* Clock Block on Freescale QorIQ Platforms
Freescale qoriq chips take primary clocking input from the external
Freescale QorIQ chips take primary clocking input from the external
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
multiple phase locked loops (PLL) to create a variety of frequencies
which can then be passed to a variety of internal logic, including
......@@ -13,14 +13,16 @@ which the chip complies.
Chassis Version Example Chips
--------------- -------------
1.0 p4080, p5020, p5040
2.0 t4240, b4860, t1040
2.0 t4240, b4860
1. Clock Block Binding
Required properties:
- compatible: Should contain a specific clock block compatible string
and a single chassis clock compatible string.
Clock block strings include, but not limited to, one of the:
- compatible: Should contain a chip-specific clock block compatible
string and (if applicable) may contain a chassis-version clock
compatible string.
Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
* "fsl,p2041-clockgen"
* "fsl,p3041-clockgen"
* "fsl,p4080-clockgen"
......@@ -30,15 +32,14 @@ Required properties:
* "fsl,b4420-clockgen"
* "fsl,b4860-clockgen"
* "fsl,ls1021a-clockgen"
Chassis clock strings include:
Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
- reg: Describes the address of the device's resources within the
address space defined by its parent bus, and resource zero
represents the clock register set
- clock-frequency: Input system clock frequency
Recommended properties:
Optional properties:
- ranges: Allows valid translation between child's address space and
parent's. Must be present if the device has sub-nodes.
- #address-cells: Specifies the number of cells used to represent
......@@ -47,8 +48,46 @@ Recommended properties:
- #size-cells: Specifies the number of cells used to represent
the size of an address. Must be present if the device has
sub-nodes and set to 1 if present
- clock-frequency: Input system clock frequency (SYSCLK)
- clocks: If clock-frequency is not specified, sysclk may be provided
as an input clock. Either clock-frequency or clocks must be
provided.
2. Clock Provider
The clockgen node should act as a clock provider, though in older device
trees the children of the clockgen node are the clock providers.
When the clockgen node is a clock provider, #clock-cells = <2>.
The first cell of the clock specifier is the clock type, and the
second cell is the clock index for the specified type.
Type# Name Index Cell
0 sysclk must be 0
1 cmux index (n in CLKCnCSR)
2 hwaccel index (n in CLKCGnHWACSR)
3 fman 0 for fm1, 1 for fm2
4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
3. Example
clockgen: global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
clock-frequency = <133333333>;
reg = <0xe1000 0x1000>;
#clock-cells = <2>;
};
fman@400000 {
...
clocks = <&clockgen 3 0>;
...
};
}
4. Legacy Child Nodes
2. Clock Provider/Consumer Binding
NOTE: These nodes are deprecated. Kernels should continue to support
device trees with these nodes, but new device trees should not use them.
Most of the bindings are from the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
......@@ -82,7 +121,7 @@ Recommended properties:
- reg: Should be the offset and length of clock block base address.
The length should be 4.
Example for clock block and clock provider:
Legacy Example:
/ {
clockgen: global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
......@@ -142,7 +181,7 @@ Example for clock block and clock provider:
};
};
Example for clock consumer:
Example for legacy clock consumer:
/ {
cpu0: PowerPC,e5500@0 {
......
......@@ -34,6 +34,7 @@
#include <linux/of_device.h>
#include <linux/phy.h>
#include <linux/memblock.h>
#include <linux/fsl/guts.h>
#include <linux/atomic.h>
#include <asm/time.h>
......@@ -51,7 +52,6 @@
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
......
......@@ -17,6 +17,7 @@
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <linux/fsl/guts.h>
#include <asm/time.h>
#include <asm/machdep.h>
......@@ -27,7 +28,6 @@
#include <asm/mpic.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
......
......@@ -16,6 +16,7 @@
* kind, whether express or implied.
*/
#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/div64.h>
......@@ -25,7 +26,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
#include <asm/fsl_lbc.h>
#include "smp.h"
......
......@@ -12,6 +12,7 @@
* kind, whether express or implied.
*/
#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/div64.h>
......@@ -21,7 +22,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
......
......@@ -19,6 +19,7 @@
#include <linux/kexec.h>
#include <linux/highmem.h>
#include <linux/cpu.h>
#include <linux/fsl/guts.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
......@@ -26,7 +27,6 @@
#include <asm/mpic.h>
#include <asm/cacheflush.h>
#include <asm/dbell.h>
#include <asm/fsl_guts.h>
#include <asm/code-patching.h>
#include <asm/cputhreads.h>
......
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/fsl/guts.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
......@@ -23,7 +24,6 @@
#include <asm/mpic.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
......
......@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of.h>
#include <linux/fsl/guts.h>
#include <asm/time.h>
#include <asm/machdep.h>
......@@ -38,7 +39,6 @@
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/simple_gpio.h>
#include <asm/fsl_guts.h>
#include "mpc86xx.h"
......
......@@ -121,7 +121,7 @@ config COMMON_CLK_AXI_CLKGEN
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on (PPC_E500MC || ARM) && OF
depends on (PPC_E500MC || ARM || ARM64) && OF
---help---
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
......
This diff is collapsed.
......@@ -20,11 +20,11 @@
#include "fsl_pamu.h"
#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/genalloc.h>
#include <asm/mpc85xx.h>
#include <asm/fsl_guts.h>
/* define indexes for each operation mapping scenario */
#define OMI_QMAN 0x00
......
......@@ -12,9 +12,10 @@
* option) any later version.
*/
#ifndef __ASM_POWERPC_FSL_GUTS_H__
#define __ASM_POWERPC_FSL_GUTS_H__
#ifdef __KERNEL__
#ifndef __FSL_GUTS_H__
#define __FSL_GUTS_H__
#include <linux/types.h>
/**
* Global Utility Registers.
......@@ -189,4 +190,3 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
#endif
#endif
#endif
......@@ -12,11 +12,11 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/fsl/guts.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
......
......@@ -11,12 +11,12 @@
*/
#include <linux/module.h>
#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
......
......@@ -18,12 +18,12 @@
*/
#include <linux/module.h>
#include <linux/fsl/guts.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment