Merge bk://are.twiddle.net/axp-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

arch/alpha/Kconfig

@@ -556,6 +556,24 @@ config ALPHA_LARGE_VMALLOC
 config VERBOSE_MCHECK
 	bool "Verbose Machine Checks"
 
+config VERBOSE_MCHECK_ON
+	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
+	depends on VERBOSE_MCHECK
+	default 1
+	---help---
+	  This option allows the default printing mode to be set, and then
+	  possibly overridden by a boot command argument.
+
+	  For example, if one wanted the option of printing verbose
+	  machine checks, but wanted the default to be as if verbose
+	  machine check printing was turned off, then one would choose
+	  the printing mode to be 0. Then, upon reboot, one could add
+	  the boot command line "verbose_mcheck=1" to get the normal
+	  verbose machine check printing, or "verbose_mcheck=2" to get
+	  the maximum information available.
+
+	  Take the default (1) unless you want more control or more info.
+
 source "drivers/pci/Kconfig"
 source "drivers/eisa/Kconfig"
 

arch/alpha/boot/bootpz.c

@@ -29,8 +29,17 @@
 /* FIXME FIXME FIXME */
 
 
+/*
+  WARNING NOTE
+
+  It is very possible that turning on additional messages may cause
+  kernel image corruption due to stack usage to do the printing.
+
+*/
+
 #undef DEBUG_CHECK_RANGE
-#define DEBUG_ADDRESSES
+#undef DEBUG_ADDRESSES
+#undef DEBUG_LAST_STEPS
 
 #define DEBUG_SP(x) \
     {register long sp asm("30"); srm_printk("%s (sp=%lx)\n", x, sp);}
@@ -433,15 +442,25 @@ start_kernel(void)
 	}
 	
 	/* Clear the zero page, then move the argument list in. */
+#ifdef DEBUG_LAST_STEPS
+	srm_printk("Preparing ZERO_PGE...\n");
+#endif
 	memset((char*)ZERO_PGE, 0, PAGE_SIZE);
 	strcpy((char*)ZERO_PGE, envval);
 
 #ifdef INITRD_IMAGE_SIZE
+
+#ifdef DEBUG_LAST_STEPS
+	srm_printk("Preparing INITRD info...\n");
+#endif
 	/* Finally, set the INITRD paramenters for the kernel. */
 	((long *)(ZERO_PGE+256))[0] = initrd_image_start;
 	((long *)(ZERO_PGE+256))[1] = INITRD_IMAGE_SIZE;
 
 #endif /* INITRD_IMAGE_SIZE */
 
+#ifdef DEBUG_LAST_STEPS
+	srm_printk("Doing 'runkernel()'...\n");
+#endif
 	runkernel();
 }

arch/alpha/kernel/core_cia.c

@@ -47,15 +47,6 @@
 
 #define vip	volatile int  *
 
-/* Save CIA configuration data as the console had it set up.  */
-
-struct 
-{
-	unsigned int w_base;
-	unsigned int w_mask;
-	unsigned int t_base;
-} saved_config[4] __attribute((common));
-
 /*
  * Given a bus, device, and function number, compute resulting
  * configuration space address.  It is therefore not safe to have
@@ -566,6 +557,77 @@ verify_tb_operation(void)
 	alpha_mv.mv_pci_tbi = NULL;
 	goto exit;
 }
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+/* Save CIA configuration data as the console had it set up.  */
+struct 
+{
+    unsigned int hae_mem;
+    unsigned int hae_io;
+    unsigned int pci_dac_offset;
+    unsigned int err_mask;
+    unsigned int cia_ctrl;
+    unsigned int cia_cnfg;
+    struct {
+	unsigned int w_base;
+	unsigned int w_mask;
+	unsigned int t_base;
+    } window[4];
+} saved_config __attribute((common));
+
+void
+cia_save_srm_settings(int is_pyxis)
+{
+	int i;
+
+	/* Save some important registers. */
+	saved_config.err_mask       = *(vip)CIA_IOC_ERR_MASK;
+	saved_config.cia_ctrl       = *(vip)CIA_IOC_CIA_CTRL;
+	saved_config.hae_mem        = *(vip)CIA_IOC_HAE_MEM;
+	saved_config.hae_io         = *(vip)CIA_IOC_HAE_IO;
+	saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
+
+	if (is_pyxis)
+	    saved_config.cia_cnfg   = *(vip)CIA_IOC_CIA_CNFG;
+	else
+	    saved_config.cia_cnfg   = 0;
+
+	/* Save DMA windows configuration. */
+	for (i = 0; i < 4; i++) {
+	    saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
+	    saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
+	    saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
+	}
+	mb();
+}
+
+void
+cia_restore_srm_settings(void)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+	    *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
+	    *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
+	    *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
+	}
+
+	*(vip)CIA_IOC_HAE_MEM   = saved_config.hae_mem;
+	*(vip)CIA_IOC_HAE_IO    = saved_config.hae_io;
+	*(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;	
+	*(vip)CIA_IOC_ERR_MASK  = saved_config.err_mask;
+	*(vip)CIA_IOC_CIA_CTRL  = saved_config.cia_ctrl;
+
+	if (saved_config.cia_cnfg) /* Must be pyxis. */
+	    *(vip)CIA_IOC_CIA_CNFG  = saved_config.cia_cnfg;
+
+	mb();
+}
+#else /* ALPHA_RESTORE_SRM_SETUP */
+#define cia_save_srm_settings(p)	do {} while (0)
+#define cia_restore_srm_settings()	do {} while (0)
+#endif /* ALPHA_RESTORE_SRM_SETUP */
+
 
 static void __init
 do_init_arch(int is_pyxis)
@@ -577,6 +639,9 @@ do_init_arch(int is_pyxis)
 	printk("pci: cia revision %d%s\n",
 	       cia_rev, is_pyxis ? " (pyxis)" : "");
 
+	if (alpha_using_srm)
+		cia_save_srm_settings(is_pyxis);
+
 	/* Set up error reporting.  */
 	temp = *(vip)CIA_IOC_ERR_MASK;
 	temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
@@ -646,24 +711,6 @@ do_init_arch(int is_pyxis)
 		hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
 	}
 
-	/* Save CIA configuration data as the console had it set up.  */
-
-	saved_config[0].w_base = *(vip)CIA_IOC_PCI_W0_BASE;
-	saved_config[0].w_mask = *(vip)CIA_IOC_PCI_W0_MASK;
-	saved_config[0].t_base = *(vip)CIA_IOC_PCI_T0_BASE;
-
-	saved_config[1].w_base = *(vip)CIA_IOC_PCI_W1_BASE;
-	saved_config[1].w_mask = *(vip)CIA_IOC_PCI_W1_MASK;
-	saved_config[1].t_base = *(vip)CIA_IOC_PCI_T1_BASE;
-
-	saved_config[2].w_base = *(vip)CIA_IOC_PCI_W2_BASE;
-	saved_config[2].w_mask = *(vip)CIA_IOC_PCI_W2_MASK;
-	saved_config[2].t_base = *(vip)CIA_IOC_PCI_T2_BASE;
-
-	saved_config[3].w_base = *(vip)CIA_IOC_PCI_W3_BASE;
-	saved_config[3].w_mask = *(vip)CIA_IOC_PCI_W3_MASK;
-	saved_config[3].t_base = *(vip)CIA_IOC_PCI_T3_BASE;
-
 	/*
 	 * Set up the PCI to main memory translation windows.
 	 *
@@ -761,21 +808,8 @@ pyxis_init_arch(void)
 void
 cia_kill_arch(int mode)
 {
-	*(vip)CIA_IOC_PCI_W0_BASE = saved_config[0].w_base;
-	*(vip)CIA_IOC_PCI_W0_MASK = saved_config[0].w_mask;
-	*(vip)CIA_IOC_PCI_T0_BASE = saved_config[0].t_base;
-
-	*(vip)CIA_IOC_PCI_W1_BASE = saved_config[1].w_base;
-	*(vip)CIA_IOC_PCI_W1_MASK = saved_config[1].w_mask;
-	*(vip)CIA_IOC_PCI_T1_BASE = saved_config[1].t_base;
-
-	*(vip)CIA_IOC_PCI_W2_BASE = saved_config[2].w_base;
-	*(vip)CIA_IOC_PCI_W2_MASK = saved_config[2].w_mask;
-	*(vip)CIA_IOC_PCI_T2_BASE = saved_config[2].t_base;
-
-	*(vip)CIA_IOC_PCI_W3_BASE = saved_config[3].w_base;
-	*(vip)CIA_IOC_PCI_W3_MASK = saved_config[3].w_mask;
-	*(vip)CIA_IOC_PCI_T3_BASE = saved_config[3].t_base;
+	if (alpha_using_srm)
+		cia_restore_srm_settings();
 }
 
 void __init
@@ -1065,7 +1099,8 @@ cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
 	printk(KERN_CRIT "  Command: %s, Parity bit: %d\n", cmd, par);
 	printk(KERN_CRIT "  Address: %#010lx, Mask: %#lx\n", addr, mask);
 }
-#endif
+#endif /* CONFIG_VERBOSE_MCHECK */
+
 
 static int
 cia_decode_mchk(unsigned long la_ptr)
@@ -1080,6 +1115,9 @@ cia_decode_mchk(unsigned long la_ptr)
 		return 0;
 
 #ifdef CONFIG_VERBOSE_MCHECK
+	if (!alpha_verbose_mcheck)
+		return 1;
+
 	switch (ffs(cia->cia_err & 0xfff) - 1) {
 	case 0: /* CIA_ERR_COR_ERR */
 		cia_decode_ecc_error(cia, "Corrected ECC error");
@@ -1152,7 +1190,7 @@ cia_decode_mchk(unsigned long la_ptr)
 	if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
 		printk(KERN_CRIT "CIA lost machine check: "
 		       "I/O timeout\n");
-#endif
+#endif /* CONFIG_VERBOSE_MCHECK */
 
 	return 1;
 }

arch/alpha/kernel/core_lca.c

@@ -242,7 +242,7 @@ void
 lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 {
 	wmb();
-	*(vip)LCA_IOC_TBIA = 0;
+	*(vulp)LCA_IOC_TBIA = 0;
 	mb();
 }
 
@@ -268,21 +268,25 @@ lca_init_arch(void)
 	/*
 	 * Set up the PCI to main memory translation windows.
 	 *
-	 * Window 0 is direct access 1GB at 1GB
-	 * Window 1 is scatter-gather 8MB at 8MB (for isa)
+	 * Mimic the SRM settings for the direct-map window.
+	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
+	 *   Window 1 is direct access 1GB at 1GB.
+	 *
+	 * Note that we do not try to save any of the DMA window CSRs
+	 * before setting them, since we cannot read those CSRs on LCA.
 	 */
 	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
 	hose->sg_pci = NULL;
 	__direct_map_base = 0x40000000;
 	__direct_map_size = 0x40000000;
 
-	*(vulp)LCA_IOC_W_BASE0 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = 0;
+	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
+	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
+	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
 
-	*(vulp)LCA_IOC_W_BASE1 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = virt_to_phys(hose->sg_isa->ptes);
+	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
+	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
+	*(vulp)LCA_IOC_T_BASE1 = 0;
 
 	*(vulp)LCA_IOC_TB_ENA = 0x80;
 
@@ -294,6 +298,15 @@ lca_init_arch(void)
 	 * data parity errors.
 	 */
 	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
+
+	/*
+	 * Finally, set up for restoring the correct HAE if using SRM.
+	 * Again, since we cannot read many of the CSRs on the LCA,
+	 * one of which happens to be the HAE, we save the value that
+	 * the SRM will expect...
+	 */
+	if (alpha_using_srm)
+		srm_hae = 0x80000000UL;
 }
 
 /*
@@ -447,8 +460,8 @@ lca_machine_check(unsigned long vector, unsigned long la_ptr,
 	}
 
 	/* Dump the logout area to give all info.  */
-#if DEBUG_MCHECK > 1
-	{
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
 		unsigned long * ptr = (unsigned long *) la_ptr;
 		long i;
 		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
@@ -456,7 +469,7 @@ lca_machine_check(unsigned long vector, unsigned long la_ptr,
 			       i*sizeof(long), ptr[i], ptr[i+1]);
 		}
 	}
-#endif
+#endif /* CONFIG_VERBOSE_MCHECK */
 }
 
 /*

arch/alpha/kernel/core_marvel.c

@@ -524,7 +524,7 @@ mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where)
 	if (!io7_port->enabled)
 		return addr;
 
-	if (hose->bus == pbus) {
+	if (!pbus->parent) { /* No parent means peer PCI bus. */
 		/* Don't support idsel > 20 on primary bus.  */
 		if (devfn >= PCI_DEVFN(21, 0))
 			return addr;

arch/alpha/kernel/core_mcpcia.c

@@ -185,7 +185,7 @@ mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
 	/* Type 1 configuration cycle for *ALL* busses.  */
 	*type1 = 1;
 
-	if (hose->bus == pbus)
+	if (!pbus->parent) /* No parent means peer PCI bus. */
 		bus = 0;
 	addr = (bus << 16) | (devfn << 8) | (where);
 	addr <<= 5; /* swizzle for SPARSE */

arch/alpha/kernel/core_t2.c

@@ -557,9 +557,9 @@ t2_machine_check(unsigned long vector, unsigned long la_ptr,
 		 struct pt_regs * regs)
 {
 	int cpu = smp_processor_id();
-#if DEBUG_MCHECK > 0
+#ifdef CONFIG_VERBOSE_MCHECK
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
-#endif /* DEBUG_MCHECK */
+#endif
 
 	/* Clear the error before any reporting.  */
 	mb();
@@ -580,39 +580,45 @@ t2_machine_check(unsigned long vector, unsigned long la_ptr,
 		 *
 		 * Just dismiss it for now on this CPU...
 		 */
-#if DEBUG_MCHECK > 0
-		printk("t2_machine_check(cpu%d): any_expected 0x%x -"
-                       " (assumed) spurious -"
-                       " code 0x%x\n", cpu, t2_mcheck_any_expected,
-                       (unsigned int)mchk_header->code);
-#endif /* DEBUG_MCHECK */
+#ifdef CONFIG_VERBOSE_MCHECK
+		if (alpha_verbose_mcheck > 1) {
+			printk("t2_machine_check(cpu%d): any_expected 0x%x -"
+			       " (assumed) spurious -"
+			       " code 0x%x\n", cpu, t2_mcheck_any_expected,
+			       (unsigned int)mchk_header->code);
+		}
+#endif
 		return;
 	}
 
 	if (!mcheck_expected(cpu) && !t2_mcheck_any_expected) {
 		if (t2_mcheck_last_taken & (1 << cpu)) {
-#if DEBUG_MCHECK > 0
+#ifdef CONFIG_VERBOSE_MCHECK
+		    if (alpha_verbose_mcheck > 1) {
 			printk("t2_machine_check(cpu%d): last_taken 0x%x - "
 			       "unexpected mcheck - code 0x%x\n",
 			       cpu, t2_mcheck_last_taken,
 			       (unsigned int)mchk_header->code);
-#endif /* DEBUG_MCHECK */
-			t2_mcheck_last_taken = 0;
-			mb();
-			return;
+		    }
+#endif
+		    t2_mcheck_last_taken = 0;
+		    mb();
+		    return;
 		} else {
 			t2_mcheck_last_taken = 0;
 			mb();
 		}
 	}
 
-#if DEBUG_MCHECK > 0
-	printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
-	       "any_expected 0x%x - code 0x%x\n",
-	       (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
-	       t2_mcheck_last_taken, t2_mcheck_any_expected,
-	       (unsigned int)mchk_header->code);
-#endif /* DEBUG_MCHECK */
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
+		       "any_expected 0x%x - code 0x%x\n",
+		       (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
+		       t2_mcheck_last_taken, t2_mcheck_any_expected,
+		       (unsigned int)mchk_header->code);
+	}
+#endif
 
 	process_mcheck_info(vector, la_ptr, regs, "T2", mcheck_expected(cpu));
 }

arch/alpha/kernel/core_titan.c

@@ -43,7 +43,6 @@ struct
  * BIOS32-style PCI interface:
  */
 
-#define DEBUG_MCHECK 0  /* 0 = minimum, 1 = debug, 2 = dump+dump */
 #define DEBUG_CONFIG 0
 
 #if DEBUG_CONFIG
@@ -123,7 +122,7 @@ mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
 		 "pci_addr=0x%p, type1=0x%p)\n",
 		 bus, device_fn, where, pci_addr, type1));
 
-        if (hose->bus == pbus)
+	if (!pbus->parent) /* No parent means peer PCI bus. */
 		bus = 0;
         *type1 = (bus != 0);
 

arch/alpha/kernel/core_tsunami.c

@@ -45,7 +45,6 @@ struct
  * BIOS32-style PCI interface:
  */
 
-#define DEBUG_MCHECK 0		/* 0 = minimal, 1 = debug, 2 = debug+dump.  */
 #define DEBUG_CONFIG 0
 
 #if DEBUG_CONFIG
@@ -100,8 +99,8 @@ mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
 	DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
 		 "pci_addr=0x%p, type1=0x%p)\n",
 		 bus, device_fn, where, pci_addr, type1));
-
-	if (hose->bus == pbus)
+	
+	if (!pbus->parent) /* No parent means peer PCI bus. */
 		bus = 0;
 	*type1 = (bus != 0);
 

arch/alpha/kernel/core_wildfire.c

@@ -24,7 +24,6 @@
 #include "proto.h"
 #include "pci_impl.h"
 
-#define DEBUG_MCHECK 0		/* 0 = minimal, 1 = debug, 2 = debug+dump.  */
 #define DEBUG_CONFIG 0
 #define DEBUG_DUMP_REGS 0
 #define DEBUG_DUMP_CONFIG 1
@@ -367,7 +366,7 @@ mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
 		 "pci_addr=0x%p, type1=0x%p)\n",
 		 bus, device_fn, where, pci_addr, type1));
 
-	if (hose->bus == pbus)
+	if (!pbus->parent) /* No parent means peer PCI bus. */
 		bus = 0;
 	*type1 = (bus != 0);
 

arch/alpha/kernel/err_titan.c

@@ -438,8 +438,9 @@ titan_machine_check(u64 vector, u64 la_ptr, struct pt_regs *regs)
 		       (unsigned int)vector, (int)smp_processor_id());
 		
 #ifdef CONFIG_VERBOSE_MCHECK
-		titan_process_logout_frame(mchk_header, 1);
-		dik_show_regs(regs, NULL);
+		titan_process_logout_frame(mchk_header, alpha_verbose_mcheck);
+		if (alpha_verbose_mcheck)
+			dik_show_regs(regs, NULL);
 #endif /* CONFIG_VERBOSE_MCHECK */
 
 		err_print_prefix = saved_err_prefix;

arch/alpha/kernel/irq_alpha.c

@@ -130,9 +130,11 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 	 * ignore it.
 	 */
 
-#if DEBUG_MCHECK > 0
-	 printk(KERN_CRIT "%s machine check %s\n", machine,
-	        expected ? "expected." : "NOT expected!!!");
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk(KERN_CRIT "%s machine check %s\n", machine,
+		       expected ? "expected." : "NOT expected!!!");
+	}
 #endif
 
 	if (expected) {
@@ -188,8 +190,8 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 	dik_show_regs(regs, NULL);
 
-#if DEBUG_MCHECK > 1
-	{
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
 		/* Dump the logout area to give all info.  */
 		unsigned long *ptr = (unsigned long *)la_ptr;
 		long i;
@@ -198,7 +200,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 			       i*sizeof(long), ptr[i], ptr[i+1]);
 		}
 	}
-#endif
+#endif /* CONFIG_VERBOSE_MCHECK */
 }
 
 /*

arch/alpha/kernel/pci.c

@@ -21,6 +21,7 @@
 #include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/cache.h>
+#include <linux/slab.h>
 #include <asm/machvec.h>
 
 #include "proto.h"
@@ -44,7 +45,11 @@ const char *const pci_mem_names[] = {
 const char pci_hae0_name[] = "HAE0";
 
 /* Indicate whether we respect the PCI setup left by console. */
-int __initdata pci_probe_only;
+/*
+ * Make this long-lived  so that we know when shutting down
+ * whether we probed only or not.
+ */
+int pci_probe_only;
 
 /*
  * The PCI controller list.
@@ -202,6 +207,52 @@ pcibios_setup(char *str)
 	return str;
 }
 
+#ifdef ALPHA_RESTORE_SRM_SETUP
+static struct pdev_srm_saved_conf *srm_saved_configs;
+
+void __init
+pdev_save_srm_config(struct pci_dev *dev)
+{
+	struct pdev_srm_saved_conf *tmp;
+	static int printed = 0;
+
+	if (!alpha_using_srm || pci_probe_only)
+		return;
+
+	if (!printed) {
+		printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
+		printed = 1;
+	}
+
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp) {
+		printk(KERN_ERR "%s: kmalloc() failed!\n", __FUNCTION__);
+		return;
+	}
+	tmp->next = srm_saved_configs;
+	tmp->dev = dev;
+
+	pci_save_state(dev, tmp->regs);
+
+	srm_saved_configs = tmp;
+}
+
+void
+pci_restore_srm_config(void)
+{
+	struct pdev_srm_saved_conf *tmp;
+
+	/* No need to restore if probed only. */
+	if (pci_probe_only)
+		return;
+
+	/* Restore SRM config. */
+	for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
+		pci_restore_state(tmp->dev, tmp->regs);
+	}
+}
+#endif
+
 void __init
 pcibios_fixup_resource(struct resource *res, struct resource *root)
 {
@@ -260,6 +311,8 @@ pcibios_fixup_bus(struct pci_bus *bus)
 
 	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
 		struct pci_dev *dev = pci_dev_b(ln);
+
+		pdev_save_srm_config(dev);
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}
@@ -269,8 +322,6 @@ void __init
 pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-
-	/* ??? FIXME -- record old value for shutdown.  */
 }
 
 /* Most Alphas have straight-forward swizzling needs.  */
@@ -278,20 +329,16 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
 u8 __init
 common_swizzle(struct pci_dev *dev, u8 *pinp)
 {
-	struct pci_controller *hose = dev->sysdata;
-
-	if (dev->bus != hose->bus) {
-		u8 pin = *pinp;
-		do {
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-			/* Move up the chain of bridges. */
-			dev = dev->bus->self;
-		} while (dev->bus->parent);
-		*pinp = pin;
+	u8 pin = *pinp;
 
-		/* The slot is the slot of the last bridge. */
-	}
+	while (dev->bus->parent) {
+		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+		/* Move up the chain of bridges. */
+		dev = dev->bus->self;
+        }
+	*pinp = pin;
 
+	/* The slot is the slot of the last bridge. */
 	return PCI_SLOT(dev->devfn);
 }
 

arch/alpha/kernel/pci_impl.h

@@ -147,6 +147,33 @@ struct pci_iommu_arena
 	unsigned int align_entry;
 };
 
+#if defined(CONFIG_ALPHA_SRM) && \
+    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
+# define NEED_SRM_SAVE_RESTORE
+#else
+# undef NEED_SRM_SAVE_RESTORE
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(NEED_SRM_SAVE_RESTORE)
+# define ALPHA_RESTORE_SRM_SETUP
+#else
+# undef ALPHA_RESTORE_SRM_SETUP
+#endif
+
+#ifdef ALPHA_RESTORE_SRM_SETUP
+/* Store PCI device configuration left by SRM here. */
+struct pdev_srm_saved_conf
+{
+	struct pdev_srm_saved_conf *next;
+	struct pci_dev *dev;
+	u32 regs[16];
+};
+
+extern void pci_restore_srm_config(void);
+#else
+#define pdev_save_srm_config(dev)	do {} while (0)
+#define pci_restore_srm_config()	do {} while (0)
+#endif
 
 /* The hose list.  */
 extern struct pci_controller *hose_head, **hose_tail;

arch/alpha/kernel/process.c

@@ -129,7 +129,7 @@ common_shutdown_1(void *generic_ptr)
 		/* This has the effect of resetting the VGA video origin.  */
 		take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
 #endif
-		/* reset_for_srm(); */
+		pci_restore_srm_config();
 		set_hae(srm_hae);
 	}
 

arch/alpha/kernel/proto.h

@@ -110,6 +110,9 @@ extern unsigned long wildfire_node_mem_size(int);
 /* setup.c */
 extern unsigned long srm_hae;
 extern int boot_cpuid;
+#ifdef CONFIG_VERBOSE_MCHECK
+extern unsigned long alpha_verbose_mcheck;
+#endif
 
 /* srmcons.c */
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
@@ -205,8 +208,6 @@ extern struct mcheck_info
 #define mcheck_extra(cpu)	((void)(cpu), __mcheck_info.extra)
 #endif
 
-#define DEBUG_MCHECK 0          /* 0 = minimal, 1 = debug, 2 = debug+dump.  */
-
 extern void process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 				struct pt_regs *regs, const char *machine,
 				int expected);

arch/alpha/kernel/setup.c

@@ -63,6 +63,12 @@ static struct notifier_block alpha_panic_block = {
 struct hwrpb_struct *hwrpb;
 unsigned long srm_hae;
 
+#ifdef CONFIG_VERBOSE_MCHECK
+/* 0=minimum, 1=verbose, 2=all */
+/* These can be overridden via the command line, ie "verbose_mcheck=2") */
+unsigned long alpha_verbose_mcheck = CONFIG_VERBOSE_MCHECK_ON;
+#endif
+
 /* Which processor we booted from.  */
 int boot_cpuid;
 
@@ -538,6 +544,12 @@ setup_arch(char **cmdline_p)
 				get_mem_size_limit(p+9) << PAGE_SHIFT;
 			continue;
 		}
+#ifdef CONFIG_VERBOSE_MCHECK
+		if (strncmp(p, "verbose_mcheck=", 15) == 0) {
+			alpha_verbose_mcheck = simple_strtol(p+15, NULL, 0);
+			continue;
+		}
+#endif
 	}
 
 	/* Replace the command line, now that we've killed it with strsep.  */
@@ -597,6 +609,38 @@ setup_arch(char **cmdline_p)
 	       var_name, alpha_mv.vector_name,
 	       (alpha_using_srm ? "SRM" : "MILO"));
 
+	printk("Major Options: "
+#ifdef CONFIG_SMP
+	       "SMP "
+#endif
+#ifdef CONFIG_ALPHA_EV56
+	       "EV56 "
+#endif
+#ifdef CONFIG_ALPHA_EV67
+	       "EV67 "
+#endif
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+	       "LEGACY_START "
+#endif
+#ifdef CONFIG_VERBOSE_MCHECK
+	       "VERBOSE_MCHECK "
+#endif
+
+#ifdef CONFIG_DISCONTIGMEM
+	       "DISCONTIGMEM "
+#ifdef CONFIG_NUMA
+	       "NUMA "
+#endif
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+	       "DEBUG_SPINLOCK "
+#endif
+#ifdef CONFIG_MAGIC_SYSRQ
+	       "MAGIC_SYSRQ "
+#endif
+	       "\n");
+
 	printk("Command line: %s\n", command_line);
 
 	/* 

arch/alpha/kernel/sys_alcor.c

@@ -223,6 +223,7 @@ alcor_kill_arch(int mode)
 {
 	cia_kill_arch(mode);
 
+#ifndef ALPHA_RESTORE_SRM_SETUP
 	switch(mode) {
 	case LINUX_REBOOT_CMD_RESTART:
 		/* Who said DEC engineer's have no sense of humor? ;-)  */
@@ -238,6 +239,29 @@ alcor_kill_arch(int mode)
 	}
 
 	halt();
+#endif
+}
+
+static void __init
+alcor_init_pci(void)
+{
+	struct pci_dev *dev;
+
+	cia_init_pci();
+
+	/*
+	 * Now we can look to see if we are really running on an XLT-type
+	 * motherboard, by looking for a 21040 TULIP in slot 6, which is
+	 * built into XLT and BRET/MAVERICK, but not available on ALCOR.
+	 */
+	dev = pci_find_device(PCI_VENDOR_ID_DEC,
+			      PCI_DEVICE_ID_DEC_TULIP,
+			      NULL);
+	if (dev && dev->devfn == PCI_DEVFN(6,0)) {
+		alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS; 
+		printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
+		       __FUNCTION__);
+	}
 }
 
 
@@ -262,7 +286,7 @@ struct alpha_machine_vector alcor_mv __initmv = {
 	.init_arch		= cia_init_arch,
 	.init_irq		= alcor_init_irq,
 	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_init_pci,
+	.init_pci		= alcor_init_pci,
 	.kill_arch		= alcor_kill_arch,
 	.pci_map_irq		= alcor_map_irq,
 	.pci_swizzle		= common_swizzle,
@@ -290,7 +314,7 @@ struct alpha_machine_vector xlt_mv __initmv = {
 	.init_arch		= cia_init_arch,
 	.init_irq		= alcor_init_irq,
 	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_init_pci,
+	.init_pci		= alcor_init_pci,
 	.kill_arch		= alcor_kill_arch,
 	.pci_map_irq		= alcor_map_irq,
 	.pci_swizzle		= common_swizzle,

arch/alpha/kernel/sys_dp264.c

@@ -463,7 +463,7 @@ monet_swizzle(struct pci_dev *dev, u8 *pinp)
 	struct pci_controller *hose = dev->sysdata;
 	int slot, pin = *pinp;
 
-	if (hose->bus == dev->bus) {
+	if (!dev->bus->parent) {
 		slot = PCI_SLOT(dev->devfn);
 	}
 	/* Check for the built-in bridge on hose 1. */

arch/alpha/kernel/sys_marvel.c

@@ -33,6 +33,13 @@
 # error NR_IRQS < MARVEL_NR_IRQS !!!
 #endif
 
+/* ??? Should probably be generic.  */
+#ifdef CONFIG_PCI_NAMES
+#define pci_pretty_name(x) ((x)->pretty_name)
+#else
+#define pci_pretty_name(x) ""
+#endif
+
 
 /*
  * Interrupt handling.
@@ -378,7 +385,7 @@ marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 		       PCI_SLOT(dev->devfn), 
 		       PCI_FUNC(dev->devfn),
 		       hose->index,
-		       dev->dev.name);
+		       pci_pretty_name (dev));
 		printk("  %d message(s) from 0x%04x\n", 
 		       1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4),
 		       msg_dat);

arch/alpha/kernel/sys_miata.c

@@ -240,6 +240,7 @@ miata_kill_arch(int mode)
 {
 	cia_kill_arch(mode);
 
+#ifndef ALPHA_RESTORE_SRM_SETUP
 	switch(mode) {
 	case LINUX_REBOOT_CMD_RESTART:
 		/* Who said DEC engineers have no sense of humor? ;-)  */ 
@@ -255,6 +256,7 @@ miata_kill_arch(int mode)
 	}
 
 	halt();
+#endif
 }
 
 

arch/alpha/kernel/sys_noritake.c

@@ -218,7 +218,7 @@ noritake_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 		{ 16+2,  16+2,  16+3,  32+2,  32+3},  /* IdSel 22,  slot 0 */
 		{ 16+4,  16+4,  16+5,  32+4,  32+5},  /* IdSel 23,  slot 1 */
 		{ 16+6,  16+6,  16+7,  32+6,  32+7},  /* IdSel 24,  slot 2 */
-		{ 16+8,  16+8,  16+9,  32+8,  32+9},	/* IdSel 25,  slot 3 */
+		{ 16+8,  16+8,  16+9,  32+8,  32+9},  /* IdSel 25,  slot 3 */
 		/* The following 5 are actually on PCI bus 1, which is 
 		   across the built-in bridge of the NORITAKE only.  */
 		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */

arch/alpha/kernel/sys_sio.c

@@ -36,6 +36,14 @@
 #include "pci_impl.h"
 #include "machvec_impl.h"
 
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+/* Save LCA configuration data as the console had it set up.  */
+struct 
+{
+	unsigned int orig_route_tab; /* for SAVE/RESTORE */
+} saved_config __attribute((common));
+#endif
+
 
 static void __init
 sio_init_irq(void)
@@ -77,6 +85,15 @@ alphabook1_init_arch(void)
 static void __init
 sio_pci_route(void)
 {
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	/* First, read and save the original setting. */
+	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				  &saved_config.orig_route_tab);
+	printk("%s: PIRQ original 0x%x new 0x%x\n", __FUNCTION__,
+	       saved_config.orig_route_tab, alpha_mv.sys.sio.route_tab);
+#endif
+
+	/* Now override with desired setting. */
 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
 				   alpha_mv.sys.sio.route_tab);
 }
@@ -245,6 +262,21 @@ alphabook1_init_pci(void)
 	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
 }
 
+void
+sio_kill_arch(int mode)
+{
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	/* Since we cannot read the PCI DMA Window CSRs, we
+	 * cannot restore them here.
+	 *
+	 * However, we CAN read the PIRQ route register, so restore it
+	 * now...
+	 */
+ 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				   saved_config.orig_route_tab);
+#endif
+}
+
 
 /*
  * The System Vectors
@@ -269,7 +301,7 @@ struct alpha_machine_vector alphabook1_mv __initmv = {
 	.init_irq		= sio_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= NULL,
+	.kill_arch		= sio_kill_arch,
 	.pci_map_irq		= noname_map_irq,
 	.pci_swizzle		= common_swizzle,
 
@@ -300,6 +332,7 @@ struct alpha_machine_vector avanti_mv __initmv = {
 	.init_irq		= sio_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
 	.pci_map_irq		= noname_map_irq,
 	.pci_swizzle		= common_swizzle,
 
@@ -329,6 +362,7 @@ struct alpha_machine_vector noname_mv __initmv = {
 	.init_irq		= sio_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
 	.pci_map_irq		= noname_map_irq,
 	.pci_swizzle		= common_swizzle,
 
@@ -367,6 +401,7 @@ struct alpha_machine_vector p2k_mv __initmv = {
 	.init_irq		= sio_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
 	.pci_map_irq		= p2k_map_irq,
 	.pci_swizzle		= common_swizzle,
 
@@ -396,6 +431,7 @@ struct alpha_machine_vector xl_mv __initmv = {
 	.init_irq		= sio_init_irq,
 	.init_rtc		= common_init_rtc,
 	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
 	.pci_map_irq		= noname_map_irq,
 	.pci_swizzle		= common_swizzle,
 

arch/alpha/lib/ev6-stxncpy.S

@@ -360,9 +360,9 @@ $unaligned:
 	lda	t2, -1		# E : for creating masks later
 	beq	t12, $u_head	# U : (stall)
 
-	nop
-	cmpbge	zero, t1, t8	# E : is there a zero?
 	extql	t2, a1, t2	# U :
+	cmpbge	zero, t1, t8	# E : is there a zero?
+	andnot	t2, t6, t12	# E : dest mask for a single word copy
 	or	t8, t10, t5	# E : test for end-of-count too
 
 	cmpbge	zero, t2, t3	# E :
@@ -379,13 +379,13 @@ $unaligned:
 	negq	t8, t6		# E : build bitmask of bytes <= zero
 	mskqh	t1, t4, t1	# U :
 
-	and	t6, t8, t12	# E :
-	subq	t12, 1, t6	# E : (stall)
-	or	t6, t12, t8	# E : (stall)
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes (stall)
+	and	t6, t8, t2	# E :
+	subq	t2, 1, t6	# E : (stall)
+	or	t6, t2, t8	# E : (stall)
+	zapnot	t12, t8, t12	# U : prepare source word; mirror changes (stall)
 
 	zapnot	t1, t8, t1	# U : to source validity mask
-	andnot	t0, t2, t0	# E : zero place for source to reside
+	andnot	t0, t12, t0	# E : zero place for source to reside
 	or	t0, t1, t0	# E : and put it there (stall both t0, t1)
 	stq_u	t0, 0(a0)	# L : (stall)
 

arch/alpha/lib/stxncpy.S

@@ -313,9 +313,9 @@ $unaligned:
 	lda	t2, -1		# e0    : for creating masks later
 	beq	t12, $u_head	# .. e1 :
 
-	nop			# e0    :
-	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
 	extql	t2, a1, t2	# e0    :
+	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
+	andnot	t2, t6, t12	# e0    : dest mask for a single word copy
 	or	t8, t10, t5	# .. e1 : test for end-of-count too
 	cmpbge	zero, t2, t3	# e0    :
 	cmoveq	a2, t5, t8	# .. e1 :
@@ -330,14 +330,14 @@ $unaligned:
 	ldq_u	t0, 0(a0)	# e0    :
 	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
 	mskqh	t1, t4, t1	# e0    :
-	and	t6, t8, t12	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
+	and	t6, t8, t2	# .. e1 :
+	subq	t2, 1, t6	# e0    :
+	or	t6, t2, t8	# e1    :
 
-	zapnot	t2, t8, t2	# e0    : prepare source word; mirror changes
+	zapnot	t12, t8, t12	# e0    : prepare source word; mirror changes
 	zapnot	t1, t8, t1	# .. e1 : to source validity mask
 
-	andnot	t0, t2, t0	# e0    : zero place for source to reside
+	andnot	t0, t12, t0	# e0    : zero place for source to reside
 	or	t0, t1, t0	# e1    : and put it there
 	stq_u	t0, 0(a0)	# e0    :
 	ret	(t9)		# .. e1 :

drivers/pci/setup-bus.c

@@ -203,6 +203,11 @@ pci_setup_bridge(struct pci_bus *bus)
 	   Enable ISA in either case (FIXME!). */
 	l = (bus->resource[0]->flags & IORESOURCE_BUS_HAS_VGA) ? 0x0c : 0x04;
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, l);
+
+	/* Make sure the bridge COMMAND register has the appropriate
+	   bits set, just in case...
+	*/
+	pcibios_enable_device(bridge, 0xfff);
 }
 
 /* Check whether the bridge supports optional I/O and

drivers/pci/setup-res.c

@@ -42,9 +42,10 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 
 	pcibios_resource_to_bus(dev, &region, res);
 
-	DBGC((KERN_ERR "  got res [%lx:%lx] bus [%lx:%lx] for "
-	      "resource %d of %s\n", res->start, res->end,
-	      region.start, region.end, resno, dev->dev.name));
+	DBGC((KERN_ERR "  got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
+	      "BAR %d of %s\n", res->start, res->end,
+	      region.start, region.end, res->flags,
+	      resno, dev->dev.name));
 
 	new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
 	if (res->flags & IORESOURCE_IO)