drm/amd/display: move dispclk vco freq to clk mgr base

This value will be needed by dml and therefore should be externally
accessible.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c

@@ -147,7 +147,7 @@ int dce_get_dp_ref_freq_khz(struct clk_mgr *clk_mgr_base)
 
 	/* Calculate the current DFS clock, in kHz.*/
 	dp_ref_clk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-		* clk_mgr->dentist_vco_freq_khz) / target_div;
+		* clk_mgr->base.dentist_vco_freq_khz) / target_div;
 
 	return dce_adjust_dp_ref_freq_for_ss(clk_mgr, dp_ref_clk_khz);
 }
@@ -239,7 +239,7 @@ int dce_set_clock(
 	/* Make sure requested clock isn't lower than minimum threshold*/
 	if (requested_clk_khz > 0)
 		requested_clk_khz = max(requested_clk_khz,
-				clk_mgr_dce->dentist_vco_freq_khz / 64);
+				clk_mgr_dce->base.dentist_vco_freq_khz / 64);
 
 	/* Prepare to program display clock*/
 	pxl_clk_params.target_pixel_clock_100hz = requested_clk_khz * 10;
@@ -276,11 +276,11 @@ static void dce_clock_read_integrated_info(struct clk_mgr_internal *clk_mgr_dce)
 	int i;
 
 	if (bp->integrated_info)
-		clk_mgr_dce->dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
-	if (clk_mgr_dce->dentist_vco_freq_khz == 0) {
-		clk_mgr_dce->dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
-		if (clk_mgr_dce->dentist_vco_freq_khz == 0)
-			clk_mgr_dce->dentist_vco_freq_khz = 3600000;
+		clk_mgr_dce->base.dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
+	if (clk_mgr_dce->base.dentist_vco_freq_khz == 0) {
+		clk_mgr_dce->base.dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
+		if (clk_mgr_dce->base.dentist_vco_freq_khz == 0)
+			clk_mgr_dce->base.dentist_vco_freq_khz = 3600000;
 	}
 
 	/*update the maximum display clock for each power state*/

drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c

@@ -81,7 +81,7 @@ int dce112_set_clock(struct clk_mgr *clk_mgr_base, int requested_clk_khz)
 	/* Make sure requested clock isn't lower than minimum threshold*/
 	if (requested_clk_khz > 0)
 		requested_clk_khz = max(requested_clk_khz,
-				clk_mgr_dce->dentist_vco_freq_khz / 62);
+				clk_mgr_dce->base.dentist_vco_freq_khz / 62);
 
 	dce_clk_params.target_clock_frequency = requested_clk_khz;
 	dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
@@ -135,7 +135,7 @@ int dce112_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_clk_khz)
 	/* Make sure requested clock isn't lower than minimum threshold*/
 	if (requested_clk_khz > 0)
 		requested_clk_khz = max(requested_clk_khz,
-				clk_mgr->dentist_vco_freq_khz / 62);
+				clk_mgr->base.dentist_vco_freq_khz / 62);
 
 	dce_clk_params.target_clock_frequency = requested_clk_khz;
 	dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c

@@ -269,11 +269,11 @@ void rv1_clk_mgr_construct(struct dc_context *ctx, struct clk_mgr_internal *clk_
 	clk_mgr->base.dprefclk_khz = 600000;
 
 	if (bp->integrated_info)
-		clk_mgr->dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
-	if (bp->fw_info_valid && clk_mgr->dentist_vco_freq_khz == 0) {
-		clk_mgr->dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
-		if (clk_mgr->dentist_vco_freq_khz == 0)
-			clk_mgr->dentist_vco_freq_khz = 3600000;
+		clk_mgr->base.dentist_vco_freq_khz = bp->integrated_info->dentist_vco_freq;
+	if (bp->fw_info_valid && clk_mgr->base.dentist_vco_freq_khz == 0) {
+		clk_mgr->base.dentist_vco_freq_khz = bp->fw_info.smu_gpu_pll_output_freq;
+		if (clk_mgr->base.dentist_vco_freq_khz == 0)
+			clk_mgr->base.dentist_vco_freq_khz = 3600000;
 	}
 
 	if (!debug->disable_dfs_bypass && bp->integrated_info)

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c

@@ -121,9 +121,9 @@ void dcn20_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
 void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr)
 {
 	int dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->dentist_vco_freq_khz / clk_mgr->base.clks.dppclk_khz;
+			* clk_mgr->base.dentist_vco_freq_khz / clk_mgr->base.clks.dppclk_khz;
 	int disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->dentist_vco_freq_khz / clk_mgr->base.clks.dispclk_khz;
+			* clk_mgr->base.dentist_vco_freq_khz / clk_mgr->base.clks.dispclk_khz;
 
 	uint32_t dppclk_wdivider = dentist_get_did_from_divider(dpp_divider);
 	uint32_t dispclk_wdivider = dentist_get_did_from_divider(disp_divider);
@@ -412,7 +412,7 @@ void dcn20_clk_mgr_construct(
 
 	if (IS_FPGA_MAXIMUS_DC(ctx->dce_environment)) {
 		dcn2_funcs.update_clocks = dcn2_update_clocks_fpga;
-		clk_mgr->dentist_vco_freq_khz = 3850000;
+		clk_mgr->base.dentist_vco_freq_khz = 3850000;
 
 	} else {
 		/* DFS Slice 2 should be used for DPREFCLK */
@@ -436,15 +436,15 @@ void dcn20_clk_mgr_construct(
 		pll_req = dc_fixpt_mul_int(pll_req, 100000);
 
 		/* integer part is now VCO frequency in kHz */
-		clk_mgr->dentist_vco_freq_khz = dc_fixpt_floor(pll_req);
+		clk_mgr->base.dentist_vco_freq_khz = dc_fixpt_floor(pll_req);
 
 		/* in case we don't get a value from the register, use default */
-		if (clk_mgr->dentist_vco_freq_khz == 0)
-			clk_mgr->dentist_vco_freq_khz = 3850000;
+		if (clk_mgr->base.dentist_vco_freq_khz == 0)
+			clk_mgr->base.dentist_vco_freq_khz = 3850000;
 
 		/* Calculate the DPREFCLK in kHz.*/
 		clk_mgr->base.dprefclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->dentist_vco_freq_khz) / target_div;
+			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
 	}
 	//Integrated_info table does not exist on dGPU projects so should not be referenced
 	//anywhere in code for dGPUs.

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c

@@ -472,7 +472,7 @@ struct clk_bw_params rn_bw_params = {
 	}
 };
 
-void rn_build_watermark_ranges(struct clk_bw_params *bw_params, struct pp_smu_wm_range_sets *ranges)
+static void rn_build_watermark_ranges(struct clk_bw_params *bw_params, struct pp_smu_wm_range_sets *ranges)
 {
 	int i, num_valid_sets;
 
@@ -542,7 +542,7 @@ static unsigned int find_dcfclk_for_voltage(struct dpm_clocks *clock_table, unsi
 	return 0;
 }
 
-void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params, struct dpm_clocks *clock_table, struct hw_asic_id *asic_id)
+static void rn_clk_mgr_helper_populate_bw_params(struct clk_bw_params *bw_params, struct dpm_clocks *clock_table, struct hw_asic_id *asic_id)
 {
 	int i, j = 0;
 
@@ -628,17 +628,17 @@ void rn_clk_mgr_construct(
 
 	if (IS_FPGA_MAXIMUS_DC(ctx->dce_environment)) {
 		dcn21_funcs.update_clocks = dcn2_update_clocks_fpga;
-		clk_mgr->dentist_vco_freq_khz = 3600000;
+		clk_mgr->base.dentist_vco_freq_khz = 3600000;
 		clk_mgr->base.dprefclk_khz = 600000;
 	} else {
 		struct clk_log_info log_info = {0};
 
 		/* TODO: Check we get what we expect during bringup */
-		clk_mgr->dentist_vco_freq_khz = get_vco_frequency_from_reg(clk_mgr);
+		clk_mgr->base.dentist_vco_freq_khz = get_vco_frequency_from_reg(clk_mgr);
 
 		/* in case we don't get a value from the register, use default */
-		if (clk_mgr->dentist_vco_freq_khz == 0)
-			clk_mgr->dentist_vco_freq_khz = 3600000;
+		if (clk_mgr->base.dentist_vco_freq_khz == 0)
+			clk_mgr->base.dentist_vco_freq_khz = 3600000;
 
 		rn_dump_clk_registers(&s, &clk_mgr->base, &log_info);
 		/* Convert dprefclk units from MHz to KHz */

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.h

@@ -33,13 +33,6 @@ struct rn_clk_registers {
 	uint32_t CLK1_CLK0_CURRENT_CNT; /* DPREFCLK */
 };
 
-void rn_build_watermark_ranges(
-		struct clk_bw_params *bw_params,
-		struct pp_smu_wm_range_sets *ranges);
-void rn_clk_mgr_helper_populate_bw_params(
-		struct clk_bw_params *bw_params,
-		struct dpm_clocks *clock_table,
-		struct hw_asic_id *asic_id);
 void rn_clk_mgr_construct(struct dc_context *ctx,
 		struct clk_mgr_internal *clk_mgr,
 		struct pp_smu_funcs *pp_smu,

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c

@@ -3002,7 +3002,7 @@ static void dcn20_pp_smu_destroy(struct pp_smu_funcs **pp_smu)
 	}
 }
 
-static void cap_soc_clocks(
+void dcn20_cap_soc_clocks(
 		struct _vcs_dpi_soc_bounding_box_st *bb,
 		struct pp_smu_nv_clock_table max_clocks)
 {
@@ -3069,7 +3069,7 @@ static void cap_soc_clocks(
 	}
 }
 
-static void update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb,
+void dcn20_update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb,
 		struct pp_smu_nv_clock_table *max_clocks, unsigned int *uclk_states, unsigned int num_states)
 {
 	struct _vcs_dpi_voltage_scaling_st calculated_states[MAX_CLOCK_LIMIT_STATES];
@@ -3127,7 +3127,7 @@ static void update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_
 	bb->clock_limits[num_calculated_states].state = bb->num_states;
 }
 
-static void patch_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb)
+void dcn20_patch_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb)
 {
 	kernel_fpu_begin();
 	if ((int)(bb->sr_exit_time_us * 1000) != dc->bb_overrides.sr_exit_time_ns
@@ -3326,14 +3326,14 @@ static bool init_soc_bounding_box(struct dc *dc,
 		}
 
 		if (clock_limits_available && uclk_states_available && num_states)
-			update_bounding_box(dc, loaded_bb, &max_clocks, uclk_states, num_states);
+			dcn20_update_bounding_box(dc, loaded_bb, &max_clocks, uclk_states, num_states);
 		else if (clock_limits_available)
-			cap_soc_clocks(loaded_bb, max_clocks);
+			dcn20_cap_soc_clocks(loaded_bb, max_clocks);
 	}
 
 	loaded_ip->max_num_otg = pool->base.res_cap->num_timing_generator;
 	loaded_ip->max_num_dpp = pool->base.pipe_count;
-	patch_bounding_box(dc, loaded_bb);
+	dcn20_patch_bounding_box(dc, loaded_bb);
 
 	return true;
 }

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.h

@@ -95,6 +95,12 @@ struct display_stream_compressor *dcn20_dsc_create(
 	struct dc_context *ctx, uint32_t inst);
 void dcn20_dsc_destroy(struct display_stream_compressor **dsc);
 
+void dcn20_patch_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb);
+void dcn20_cap_soc_clocks(
+		struct _vcs_dpi_soc_bounding_box_st *bb,
+		struct pp_smu_nv_clock_table max_clocks);
+void dcn20_update_bounding_box(struct dc *dc, struct _vcs_dpi_soc_bounding_box_st *bb,
+		struct pp_smu_nv_clock_table *max_clocks, unsigned int *uclk_states, unsigned int num_states);
 struct hubp *dcn20_hubp_create(
 	struct dc_context *ctx,
 	uint32_t inst);

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h

@@ -149,7 +149,6 @@ struct wm_table {
 struct clk_bw_params {
 	unsigned int vram_type;
 	unsigned int num_channels;
-	unsigned int dispclk_vco_khz;
 	struct clk_limit_table clk_table;
 	struct wm_table wm_table;
 };
@@ -192,6 +191,7 @@ struct clk_mgr {
 	struct dc_clocks clks;
 	bool psr_allow_active_cache;
 	int dprefclk_khz; // Used by program pixel clock in clock source funcs, need to figureout where this goes
+	int dentist_vco_freq_khz;
 #ifdef CONFIG_DRM_AMD_DC_DCN2_1
 	struct clk_bw_params *bw_params;
 #endif

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h

@@ -225,8 +225,6 @@ struct clk_mgr_internal {
 	struct state_dependent_clocks max_clks_by_state[DM_PP_CLOCKS_MAX_STATES];
 
 	/*TODO: figure out which of the below fields should be here vs in asic specific portion */
-	int dentist_vco_freq_khz;
-
 	/* Cache the status of DFS-bypass feature*/
 	bool dfs_bypass_enabled;
 	/* True if the DFS-bypass feature is enabled and active. */