Commit 451688ba authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
  ide: introduce HAVE_IDE
  kbuild: silence CHK/UPD messages according to $(quiet)
  scsi: fix makefile for aic7(3*x)
  kbuild/modpost: Use warn() for announcing section mismatches
  Add binoffset to gitignore
  kbuild/modpost: improve warnings if symbol is unknown
parents acac103e ed2c9fa5
......@@ -5,6 +5,7 @@
config ALPHA
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
help
The Alpha is a 64-bit general-purpose processor designed and
......
......@@ -222,6 +222,7 @@ config ARCH_CLPS7500
select TIMER_ACORN
select ISA
select NO_IOPORT
select HAVE_IDE
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
......@@ -234,6 +235,7 @@ config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
select HAVE_IDE
help
Support for Intel's EBSA285 companion chip.
......@@ -258,6 +260,7 @@ config ARCH_EP93XX
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
select HAVE_IDE
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
......@@ -296,6 +299,7 @@ config ARCH_IOP32X
depends on MMU
select PLAT_IOP
select PCI
select HAVE_IDE
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
......@@ -305,12 +309,14 @@ config ARCH_IOP33X
depends on MMU
select PLAT_IOP
select PCI
select HAVE_IDE
help
Support for Intel's IOP33X (XScale) family of processors.
config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
select HAVE_IDE
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
......@@ -328,12 +334,14 @@ config ARCH_IXP4XX
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_IDE
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
select HAVE_IDE
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
......@@ -388,6 +396,7 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_IDE
select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
......@@ -403,6 +412,7 @@ config ARCH_RPC
select ARCH_MAY_HAVE_PC_FDC
select ISA_DMA_API
select NO_IOPORT
select HAVE_IDE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
......@@ -414,12 +424,14 @@ config ARCH_SA1100
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
select HAVE_IDE
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
select HAVE_IDE
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
......@@ -427,6 +439,7 @@ config ARCH_S3C2410
config ARCH_SHARK
bool "Shark"
select HAVE_IDE
select ISA
select ISA_DMA
select PCI
......@@ -436,6 +449,7 @@ config ARCH_SHARK
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select HAVE_IDE
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
......@@ -1093,12 +1107,7 @@ source "drivers/block/Kconfig"
source "drivers/misc/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
|| ARCH_IXP23XX
source "drivers/ide/Kconfig"
endif
source "drivers/scsi/Kconfig"
......
......@@ -10,6 +10,7 @@ config AVR32
# With EMBEDDED=n, we get lots of stuff automatically selected
# that we usually don't need on AVR32.
select EMBEDDED
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
help
......
......@@ -24,6 +24,7 @@ config RWSEM_XCHGADD_ALGORITHM
config BLACKFIN
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
config ZONE_DMA
......
......@@ -54,6 +54,7 @@ config FORCE_MAX_ZONEORDER
config CRIS
bool
default y
select HAVE_IDE
config HZ
int
......
......@@ -5,6 +5,7 @@
config FRV
bool
default y
select HAVE_IDE
config ZONE_DMA
bool
......
......@@ -8,6 +8,7 @@ mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration"
config H8300
bool
default y
select HAVE_IDE
config MMU
bool
......
......@@ -15,6 +15,7 @@ config IA64
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
select ARCH_SUPPORTS_MSI
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
default y
......
......@@ -8,6 +8,7 @@ mainmenu "Linux/M32R Kernel Configuration"
config M32R
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
config SBUS
......
......@@ -5,6 +5,7 @@
config M68K
bool
default y
select HAVE_IDE
config MMU
bool
......
......@@ -8,6 +8,7 @@ mainmenu "uClinux/68k (w/o MMU) Kernel Configuration"
config M68K
bool
default y
select HAVE_IDE
config MMU
bool
......
config MIPS
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
......
......@@ -7,6 +7,7 @@ mainmenu "Linux/PA-RISC Kernel Configuration"
config PARISC
def_bool y
select HAVE_IDE
select HAVE_OPROFILE
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
......
......@@ -87,6 +87,7 @@ config ARCH_NO_VIRT_TO_BUS
config PPC
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
......
......@@ -42,6 +42,7 @@ config GENERIC_CALIBRATE_DELAY
config PPC
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
......
......@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
config SUPERH
def_bool y
select EMBEDDED
select HAVE_IDE
select HAVE_OPROFILE
help
The SuperH is a RISC processor targeted for use in embedded systems
......
......@@ -69,6 +69,7 @@ config NR_CPUS
config SPARC
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
# Identify this as a Sparc32 build
......
......@@ -14,6 +14,7 @@ config SPARC
config SPARC64
bool
default y
select HAVE_IDE
help
SPARC is a family of RISC microprocessors designed and marketed by
Sun Microsystems, incorporated. This port covers the newer 64-bit
......
......@@ -78,6 +78,7 @@ config MCA
config V850
bool
default y
select HAVE_IDE
menu "Processor type and features"
......
......@@ -18,6 +18,7 @@ config X86_64
### Arch settings
config X86
def_bool y
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
......
......@@ -14,6 +14,7 @@ config ZONE_DMA
config XTENSA
bool
default y
select HAVE_IDE
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
......
......@@ -4,10 +4,14 @@
# Andre Hedrick <andre@linux-ide.org>
#
# Select HAVE_IDE if IDE is supported
config HAVE_IDE
def_bool n
menuconfig IDE
tristate "ATA/ATAPI/MFM/RLL support"
depends on HAVE_IDE
depends on BLOCK
depends on HAS_IOMEM
---help---
If you say Y here, your kernel will be able to manage low cost mass
storage units such as ATA/(E)IDE and ATAPI units. The most common
......
......@@ -38,6 +38,7 @@ config PCMCIA_DEBUG
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
select HAVE_IDE
default y
---help---
This option enables support for 16-bit PCMCIA cards. Most older
......
......@@ -44,8 +44,8 @@ clean-files += aic79xx_seq.h aic79xx_reg.h aic79xx_reg_print.c
# Dependencies for generated files need to be listed explicitly
$(addprefix $(src)/,$(aic7xxx-y:.o=.c)): $(obj)/aic7xxx_seq.h $(obj)/aic7xxx_reg.h
$(addprefix $(src)/,$(aic79xx-y:.o=.c)): $(obj)/aic79xx_seq.h $(obj)/aic79xx_reg.h
$(addprefix $(obj)/,$(aic7xxx-y)): $(obj)/aic7xxx_seq.h $(obj)/aic7xxx_reg.h
$(addprefix $(obj)/,$(aic79xx-y)): $(obj)/aic79xx_seq.h $(obj)/aic79xx_reg.h
aic7xxx-gen-$(CONFIG_AIC7XXX_BUILD_FIRMWARE) := $(obj)/aic7xxx_reg.h
aic7xxx-gen-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT) += $(obj)/aic7xxx_reg_print.c
......
......@@ -27,7 +27,9 @@ $(obj)/version.o: include/linux/compile.h
# mkcompile_h will make sure to only update the
# actual file if its content has changed.
quiet_chk_compile.h = echo ' CHK $@'
silent_chk_compile.h = :
include/linux/compile.h: FORCE
@echo ' CHK $@'
@$($(quiet)chk_compile.h)
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(KBUILD_CFLAGS)"
......@@ -6,3 +6,4 @@ kallsyms
pnmtologo
bin2c
unifdef
binoffset
......@@ -39,15 +39,19 @@ escsq = $(subst $(squote),'\$(squote)',$1)
# - If they are equal no change, and no timestamp update
# - stdin is piped in from the first prerequisite ($<) so one has
# to specify a valid file as first prerequisite (often the kbuild file)
quiet_chk_filechk = echo ' CHK $@'
silent_chk_filechk = :
quiet_upd_filechk = echo ' UPD $@'
silent_upd_filechk = :
define filechk
$(Q)set -e; \
echo ' CHK $@'; \
$($(quiet)chk_filechk); \
mkdir -p $(dir $@); \
$(filechk_$(1)) < $< > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
else \
echo ' UPD $@'; \
$($(quiet)upd_filechk); \
mv -f $@.tmp $@; \
fi
endef
......
......@@ -613,7 +613,7 @@ static const char *sym_name(struct elf_info *elf, Elf_Sym *sym)
if (sym)
return elf->strtab + sym->st_name;
else
return "";
return "(unknown)";
}
static const char *sec_name(struct elf_info *elf, int shndx)
......@@ -1102,7 +1102,7 @@ static int is_function(Elf_Sym *sym)
if (sym)
return ELF_ST_TYPE(sym->st_info) == STT_FUNC;
else
return 0;
return -1;
}
/*
......@@ -1120,24 +1120,31 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
{
const char *from, *from_p;
const char *to, *to_p;
from = from_is_func ? "function" : "variable";
from_p = from_is_func ? "()" : "";
to = to_is_func ? "function" : "variable";
to_p = to_is_func ? "()" : "";
switch (from_is_func) {
case 0: from = "variable"; from_p = ""; break;
case 1: from = "function"; from_p = "()"; break;
default: from = "(unknown reference)"; from_p = ""; break;
}
switch (to_is_func) {
case 0: to = "variable"; to_p = ""; break;
case 1: to = "function"; to_p = "()"; break;
default: to = "(unknown reference)"; to_p = ""; break;
}
sec_mismatch_count++;
if (!sec_mismatch_verbose)
return;
fprintf(stderr, "WARNING: %s(%s+0x%llx): Section mismatch in"
" reference from the %s %s%s to the %s %s:%s%s\n",
modname, fromsec, fromaddr, from, fromsym, from_p,
to, tosec, tosym, to_p);
warn("%s(%s+0x%llx): Section mismatch in reference from the %s %s%s "
"to the %s %s:%s%s\n",
modname, fromsec, fromaddr, from, fromsym, from_p, to, tosec,
tosym, to_p);
switch (mismatch) {
case TEXT_TO_INIT:
fprintf(stderr,
"The function %s %s() references\n"
"The function %s%s() references\n"
"the %s %s%s%s.\n"
"This is often because %s lacks a %s\n"
"annotation or the annotation of %s is wrong.\n",
......@@ -1938,10 +1945,10 @@ int main(int argc, char **argv)
if (dump_write)
write_dump(dump_write);
if (sec_mismatch_count && !sec_mismatch_verbose)
fprintf(stderr, "modpost: Found %d section mismatch(es).\n"
"To see full details build your kernel with:\n"
"'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n",
sec_mismatch_count);
warn("modpost: Found %d section mismatch(es).\n"
"To see full details build your kernel with:\n"
"'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n",
sec_mismatch_count);
return err;
}
......@@ -13,6 +13,7 @@ set -e
# Some variables and settings used throughout the script
version=$KERNELRELEASE
revision=`cat .version`
tmpdir="$objtree/debian/tmp"
packagename=linux-$version
......@@ -65,7 +66,7 @@ done
name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
# Generate a simple changelog template
cat <<EOF > debian/changelog
linux ($version) unstable; urgency=low
linux ($version-$revision) unstable; urgency=low
* A standard release
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment