Commit 45f5d5a9 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman

arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name

Currently there are two nodes named "regulator1" in the Draak DTS: a
3.3V regulator for the eMMC and the LVDS decoder, and a 12V regulator
for the backlight.  This causes the former to be overwritten by the
latter.

Fix this by renaming all regulators with numerical suffixes to use named
suffixes, which are less likely to conflict.

Fixes: 4fbd4158 ("arm64: dts: renesas: r8a77995: draak: Add backlight")
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 5f9e832c
...@@ -97,7 +97,7 @@ memory@48000000 { ...@@ -97,7 +97,7 @@ memory@48000000 {
reg = <0x0 0x48000000 0x0 0x18000000>; reg = <0x0 0x48000000 0x0 0x18000000>;
}; };
reg_1p8v: regulator0 { reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "fixed-1.8V"; regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
...@@ -106,7 +106,7 @@ reg_1p8v: regulator0 { ...@@ -106,7 +106,7 @@ reg_1p8v: regulator0 {
regulator-always-on; regulator-always-on;
}; };
reg_3p3v: regulator1 { reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "fixed-3.3V"; regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
...@@ -115,7 +115,7 @@ reg_3p3v: regulator1 { ...@@ -115,7 +115,7 @@ reg_3p3v: regulator1 {
regulator-always-on; regulator-always-on;
}; };
reg_12p0v: regulator1 { reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "D12.0V"; regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>; regulator-min-microvolt = <12000000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment