Commit 46350b71 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation

Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015):
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf

states the following:

"LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation
up to 396 MHz."

So fix the entry by adding the 25mV margin value as done in the other
entries of the table, which results in 1.15V for 396MHz operation.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent fe4266ba
...@@ -30,7 +30,7 @@ cpu@0 { ...@@ -30,7 +30,7 @@ cpu@0 {
/* kHz uV */ /* kHz uV */
996000 1250000 996000 1250000
792000 1175000 792000 1175000
396000 1075000 396000 1150000
>; >;
fsl,soc-operating-points = < fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */ /* ARM kHz SOC-PU uV */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment