Commit 4640fa60 authored by Shadi Ammouri's avatar Shadi Ammouri Committed by Nicolas Pitre

[ARM] Kirkwood: Marvell SheevaPlug support

Signed-off-by: default avatarNicolas Pitre <nico@marvell.com>
parent d6f818f7
......@@ -20,6 +20,12 @@ config MACH_RD88F6281
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
endmenu
endif
......@@ -3,3 +3,4 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
/*
* arch/arm/mach-kirkwood/sheevaplug-setup.c
*
* Marvell SheevaPlug Reference Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include "common.h"
static struct mtd_partition sheevaplug_nand_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_1M
}, {
.name = "uImage",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M
}, {
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
};
static struct resource sheevaplug_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data sheevaplug_nand_data = {
.parts = sheevaplug_nand_parts,
.nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
.cle = 0,
.ale = 1,
.width = 8,
.chip_delay = 25,
};
static struct platform_device sheevaplug_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &sheevaplug_nand_data,
},
.resource = &sheevaplug_nand_resource,
.num_resources = 1,
};
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
// unfortunately the CD signal has not been connected */
};
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_uart0_init();
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_nand_flash);
}
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment