Commit 46824e22 authored by Nishanth Menon's avatar Nishanth Menon Committed by Linus Walleij

gpio: omap: Fix interrupt names

When viewing the /proc/interrupts, there is no information about which
GPIO bank a specific gpio interrupt is hooked on to. This is more than a
bit irritating as such information can esily be provided back to the
user and at times, can be crucial for debug.

So, instead of displaying something like:
31:	0	0  GPIO   0  palmas
32:	0	0  GPIO  27  mmc0

Display the following with appropriate device name:
31:	0	0  4ae10000.gpio   0  palmas
32:	0	0  4805d000.gpio  27  mmc0

This requires that we create irq_chip instance specific for each GPIO
bank which is trivial to achieve.
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: default avatarKevin Hilman <khilman@linaro.org>
Acked-by: default avatarAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 9afd23b6
......@@ -857,16 +857,6 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
spin_unlock_irqrestore(&bank->lock, flags);
}
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
.irq_shutdown = omap_gpio_irq_shutdown,
.irq_ack = omap_gpio_ack_irq,
.irq_mask = omap_gpio_mask_irq,
.irq_unmask = omap_gpio_unmask_irq,
.irq_set_type = omap_gpio_irq_type,
.irq_set_wake = omap_gpio_wake_enable,
};
/*---------------------------------------------------------------------*/
static int omap_mpuio_suspend_noirq(struct device *dev)
......@@ -1088,7 +1078,7 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
static int omap_gpio_chip_init(struct gpio_bank *bank)
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
{
int j;
static int gpio;
......@@ -1137,7 +1127,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank)
}
#endif
ret = gpiochip_irqchip_add(&bank->chip, &gpio_irq_chip,
ret = gpiochip_irqchip_add(&bank->chip, irqc,
irq_base, omap_gpio_irq_handler,
IRQ_TYPE_NONE);
......@@ -1147,7 +1137,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank)
return -ENODEV;
}
gpiochip_set_chained_irqchip(&bank->chip, &gpio_irq_chip,
gpiochip_set_chained_irqchip(&bank->chip, irqc,
bank->irq, omap_gpio_irq_handler);
for (j = 0; j < bank->width; j++) {
......@@ -1172,6 +1162,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
const struct omap_gpio_platform_data *pdata;
struct resource *res;
struct gpio_bank *bank;
struct irq_chip *irqc;
int ret;
match = of_match_device(of_match_ptr(omap_gpio_match), dev);
......@@ -1186,6 +1177,18 @@ static int omap_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
}
irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL);
if (!irqc)
return -ENOMEM;
irqc->irq_shutdown = omap_gpio_irq_shutdown,
irqc->irq_ack = omap_gpio_ack_irq,
irqc->irq_mask = omap_gpio_mask_irq,
irqc->irq_unmask = omap_gpio_unmask_irq,
irqc->irq_set_type = omap_gpio_irq_type,
irqc->irq_set_wake = omap_gpio_wake_enable,
irqc->name = dev_name(&pdev->dev);
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!res)) {
dev_err(dev, "Invalid IRQ resource\n");
......@@ -1241,7 +1244,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
omap_gpio_mod_init(bank);
ret = omap_gpio_chip_init(bank);
ret = omap_gpio_chip_init(bank, irqc);
if (ret)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment