dm integrity: add a bitmap mode

Introduce an alternate mode of operation where dm-integrity uses a
bitmap instead of a journal. If a bit in the bitmap is 1, the
corresponding region's data and integrity tags are not synchronized - if
the machine crashes, the unsynchronized regions will be recalculated.
The bitmap mode is faster than the journal mode, because we don't have
to write the data twice, but it is also less reliable, because if data
corruption happens when the machine crashes, it may not be detected.

Benchmark results for an SSD connected to a SATA300 port, when doing
large linear writes with dd:

buffered I/O:
        raw device throughput - 245MB/s
        dm-integrity with journaling - 120MB/s
        dm-integrity with bitmap - 238MB/s

direct I/O with 1MB block size:
        raw device throughput - 248MB/s
        dm-integrity with journaling - 123MB/s
        dm-integrity with bitmap - 223MB/s

For more info see dm-integrity in Documentation/device-mapper/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Documentation/device-mapper/dm-integrity.txt

@@ -21,6 +21,13 @@ mode it calculates and verifies the integrity tag internally. In this
 mode, the dm-integrity target can be used to detect silent data
 corruption on the disk or in the I/O path.
 
+There's an alternate mode of operation where dm-integrity uses bitmap
+instead of a journal. If a bit in the bitmap is 1, the corresponding
+region's data and integrity tags are not synchronized - if the machine
+crashes, the unsynchronized regions will be recalculated. The bitmap mode
+is faster than the journal mode, because we don't have to write the data
+twice, but it is also less reliable, because if data corruption happens
+when the machine crashes, it may not be detected.
 
 When loading the target for the first time, the kernel driver will format
 the device. But it will only format the device if the superblock contains
@@ -59,6 +66,10 @@ Target arguments:
 		either both data and tag or none of them are written. The
 		journaled mode degrades write throughput twice because the
 		data have to be written twice.
+	B - bitmap mode - data and metadata are written without any
+		synchronization, the driver maintains a bitmap of dirty
+		regions where data and metadata don't match. This mode can
+		only be used with internal hash.
 	R - recovery mode - in this mode, journal is not replayed,
 		checksums are not checked and writes to the device are not
 		allowed. This mode is useful for data recovery if the
@@ -150,6 +161,15 @@ block_size:number
 	Supported values are 512, 1024, 2048 and 4096 bytes.  If not
 	specified the default block size is 512 bytes.
 
+sectors_per_bit:number
+	In the bitmap mode, this parameter specifies the number of
+	512-byte sectors that corresponds to one bitmap bit.
+
+bitmap_flush_interval:number
+	The bitmap flush interval in milliseconds. The metadata buffers
+	are synchronized when this interval expires.
+
+
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
 be changed when reloading the target (load an inactive table and swap the
 tables with suspend and resume). The other arguments should not be changed
@@ -174,6 +194,8 @@ The layout of the formatted block device:
 	* flags
 	  SB_FLAG_HAVE_JOURNAL_MAC - a flag is set if journal_mac is used
 	  SB_FLAG_RECALCULATING - recalculating is in progress
+	  SB_FLAG_DIRTY_BITMAP - journal area contains the bitmap of dirty
+		blocks
 	* log2(sectors per block)
 	* a position where recalculating finished
 * journal