Commit 46cb52ad authored by Linus Walleij's avatar Linus Walleij Committed by Jens Axboe

ata: ftide010: Add a quirk for SQ201

The DMA is broken on this specific device for some unknown
reason (probably badly designed or plain broken interface
electronics) and will only work with PIO. Other users of
the same hardware does not have this problem.

Add a specific quirk so that this Gemini device gets
DMA turned off. Also fix up some code around passing the
port information around in probe while we're at it.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
parent b0a84beb
......@@ -256,14 +256,12 @@ static struct ata_port_operations pata_ftide010_port_ops = {
.qc_issue = ftide010_qc_issue,
};
static struct ata_port_info ftide010_port_info[] = {
{
.flags = ATA_FLAG_SLAVE_POSS,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.pio_mask = ATA_PIO4,
.port_ops = &pata_ftide010_port_ops,
},
static struct ata_port_info ftide010_port_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.pio_mask = ATA_PIO4,
.port_ops = &pata_ftide010_port_ops,
};
#if IS_ENABLED(CONFIG_SATA_GEMINI)
......@@ -349,6 +347,7 @@ static int pata_ftide010_gemini_cable_detect(struct ata_port *ap)
}
static int pata_ftide010_gemini_init(struct ftide010 *ftide,
struct ata_port_info *pi,
bool is_ata1)
{
struct device *dev = ftide->dev;
......@@ -373,7 +372,13 @@ static int pata_ftide010_gemini_init(struct ftide010 *ftide,
/* Flag port as SATA-capable */
if (gemini_sata_bridge_enabled(sg, is_ata1))
ftide010_port_info[0].flags |= ATA_FLAG_SATA;
pi->flags |= ATA_FLAG_SATA;
/* This device has broken DMA, only PIO works */
if (of_machine_is_compatible("itian,sq201")) {
pi->mwdma_mask = 0;
pi->udma_mask = 0;
}
/*
* We assume that a simple 40-wire cable is used in the PATA mode.
......@@ -435,6 +440,7 @@ static int pata_ftide010_gemini_init(struct ftide010 *ftide,
}
#else
static int pata_ftide010_gemini_init(struct ftide010 *ftide,
struct ata_port_info *pi,
bool is_ata1)
{
return -ENOTSUPP;
......@@ -446,7 +452,7 @@ static int pata_ftide010_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
const struct ata_port_info pi = ftide010_port_info[0];
struct ata_port_info pi = ftide010_port_info;
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ftide010 *ftide;
struct resource *res;
......@@ -490,6 +496,7 @@ static int pata_ftide010_probe(struct platform_device *pdev)
* are ATA0. This will also set up the cable types.
*/
ret = pata_ftide010_gemini_init(ftide,
&pi,
(res->start == 0x63400000));
if (ret)
goto err_dis_clk;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment