[PATCH] I2C: fix up the order of bus drivers in the Kconfig and Makefile

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

drivers/i2c/busses/Kconfig

@@ -185,6 +185,18 @@ config I2C_KEYWEST
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-keywest.
 
+config I2C_MPC
+	tristate "MPC107/824x/85xx/52xx"
+	depends on I2C && FSL_OCP
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
+	  MPC85xx family processors. The driver may also work on 52xx
+	  family processors, though interrupts are known not to work.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mpc.
+
 config I2C_NFORCE2
 	tristate "Nvidia Nforce2"
 	depends on I2C && PCI && EXPERIMENTAL
@@ -407,16 +419,4 @@ config I2C_VOODOO3
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-voodoo3.
 
-config I2C_MPC
-	tristate "MPC107/824x/85xx/52xx"
-	depends on I2C && FSL_OCP
-	help
-	  If you say yes to this option, support will be included for the
-	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-	  MPC85xx family processors. The driver may also work on 52xx
-	  family processors, though interrupts are known not to work.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-mpc.
-
 endmenu

drivers/i2c/busses/Makefile

@@ -15,9 +15,10 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
 obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
-obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
+obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
 obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
@@ -33,7 +34,6 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
-obj-$(CONFIG_I2C_MPC)	+= i2c-mpc.o
 
 ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
 EXTRA_CFLAGS += -DDEBUG