Commit 4737f097 authored by Pavel Machek's avatar Pavel Machek Committed by Jiri Kosina

trivial: Kconfig: .ko is normally not included in module names

.ko is normally not included in Kconfig help, make it consistent.
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 32262240
...@@ -872,7 +872,7 @@ config BFIN_GPTIMERS ...@@ -872,7 +872,7 @@ config BFIN_GPTIMERS
are unsure, say N. are unsure, say N.
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called gptimers.ko. will be called gptimers.
choice choice
prompt "Uncached DMA region" prompt "Uncached DMA region"
......
...@@ -112,7 +112,7 @@ config GDROM ...@@ -112,7 +112,7 @@ config GDROM
with up to 1 GB of data. This drive will also read standard CD ROM with up to 1 GB of data. This drive will also read standard CD ROM
disks. Select this option to access any disks in your GD ROM drive. disks. Select this option to access any disks in your GD ROM drive.
Most users will want to say "Y" here. Most users will want to say "Y" here.
You can also build this as a module which will be called gdrom.ko You can also build this as a module which will be called gdrom.
source "drivers/block/paride/Kconfig" source "drivers/block/paride/Kconfig"
......
...@@ -692,7 +692,7 @@ config HVCS ...@@ -692,7 +692,7 @@ config HVCS
this driver. this driver.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called hvcs.ko. Additionally, this module module will be called hvcs. Additionally, this module
will depend on arch specific APIs exported from hvcserver.ko will depend on arch specific APIs exported from hvcserver.ko
which will also be compiled when this driver is built as a which will also be compiled when this driver is built as a
module. module.
......
...@@ -7,7 +7,7 @@ menuconfig CONNECTOR ...@@ -7,7 +7,7 @@ menuconfig CONNECTOR
of the netlink socket protocol. of the netlink socket protocol.
Connector support can also be built as a module. If so, the module Connector support can also be built as a module. If so, the module
will be called cn.ko. will be called cn.
if CONNECTOR if CONNECTOR
......
...@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES ...@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
Available in VIA C3 and newer CPUs. Available in VIA C3 and newer CPUs.
If unsure say M. The compiled module will be If unsure say M. The compiled module will be
called padlock-aes.ko called padlock-aes.
config CRYPTO_DEV_PADLOCK_SHA config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms" tristate "PadLock driver for SHA1 and SHA256 algorithms"
...@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA ...@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
Available in VIA C7 and newer processors. Available in VIA C7 and newer processors.
If unsure say M. The compiled module will be If unsure say M. The compiled module will be
called padlock-sha.ko called padlock-sha.
config CRYPTO_DEV_GEODE config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine" tristate "Support for the Geode LX AES engine"
...@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC ...@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module" bool "Monolithic zcrypt module"
depends on ZCRYPT="m" depends on ZCRYPT="m"
help help
Select this option if you want to have a single module z90crypt.ko Select this option if you want to have a single module z90crypt,
that contains all parts of the crypto device driver (ap bus, that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers). request router and all the card drivers).
......
...@@ -46,7 +46,7 @@ menuconfig IDE ...@@ -46,7 +46,7 @@ menuconfig IDE
SMART parameters from disk drives. SMART parameters from disk drives.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ide-core.ko. module will be called ide-core.
For further information, please read <file:Documentation/ide/ide.txt>. For further information, please read <file:Documentation/ide/ide.txt>.
......
...@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2 ...@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
help help
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
firmware protocol used by this module is similar to the one used by the firmware protocol used by this module is similar to the one used by the
old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko. old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
config DVB_USB_DTT200U config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
......
...@@ -49,7 +49,7 @@ config MTD_MS02NV ...@@ -49,7 +49,7 @@ config MTD_MS02NV
If you want to compile this driver as a module ( = code which can be If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want), inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. say M here and read <file:Documentation/kbuild/modules.txt>.
The module will be called ms02-nv.ko. The module will be called ms02-nv.
config MTD_DATAFLASH config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash" tristate "Support for AT45xxx DataFlash"
......
...@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE ...@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
help help
This enables the driver for the NAND flash device found on the This enables the driver for the NAND flash device found on the
Basler eXcite Smart Camera. If built as a module, the driver Basler eXcite Smart Camera. If built as a module, the driver
will be named "excite_nandflash.ko". will be named excite_nandflash.
config MTD_NAND_CAFE config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip" tristate "NAND support for OLPC CAFÉ chip"
...@@ -282,7 +282,7 @@ config MTD_NAND_CS553X ...@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
controller is enabled for NAND, and currently requires that controller is enabled for NAND, and currently requires that
the controller be in MMIO mode. the controller be in MMIO mode.
If you say "m", the module will be called "cs553x_nand.ko". If you say "m", the module will be called cs553x_nand.
config MTD_NAND_ATMEL config MTD_NAND_ATMEL
tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32" tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
......
...@@ -1880,7 +1880,7 @@ config FEC_MPC52xx ...@@ -1880,7 +1880,7 @@ config FEC_MPC52xx
---help--- ---help---
This option enables support for the MPC5200's on-chip This option enables support for the MPC5200's on-chip
Fast Ethernet Controller Fast Ethernet Controller
If compiled as module, it will be called 'fec_mpc52xx.ko'. If compiled as module, it will be called fec_mpc52xx.
config FEC_MPC52xx_MDIO config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver" bool "MPC52xx FEC MDIO bus driver"
...@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO ...@@ -1892,7 +1892,7 @@ config FEC_MPC52xx_MDIO
(Motorola? industry standard). (Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this. If your board uses an external PHY connected to FEC, enable this.
If not sure, enable. If not sure, enable.
If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. If compiled as module, it will be called fec_mpc52xx_phy.
config NE_H8300 config NE_H8300
tristate "NE2000 compatible support for H8/300" tristate "NE2000 compatible support for H8/300"
......
...@@ -310,7 +310,7 @@ config PRISM54 ...@@ -310,7 +310,7 @@ config PRISM54
If you want to compile the driver as a module ( = code which can be If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want), inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. say M here and read <file:Documentation/kbuild/modules.txt>.
The module will be called prism54.ko. The module will be called prism54.
config USB_ZD1201 config USB_ZD1201
tristate "USB ZD1201 based Wireless device support" tristate "USB ZD1201 based Wireless device support"
......
...@@ -29,7 +29,7 @@ config HOSTAP ...@@ -29,7 +29,7 @@ config HOSTAP
PLX/PCI/CS version of the driver to actually use the driver. PLX/PCI/CS version of the driver to actually use the driver.
The driver can be compiled as a module and it will be called The driver can be compiled as a module and it will be called
"hostap.ko". hostap.
config HOSTAP_FIRMWARE config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver" bool "Support downloading firmware images with Host AP driver"
...@@ -68,7 +68,7 @@ config HOSTAP_PLX ...@@ -68,7 +68,7 @@ config HOSTAP_PLX
driver. driver.
The driver can be compiled as a module and will be named The driver can be compiled as a module and will be named
"hostap_plx.ko". hostap_plx.
config HOSTAP_PCI config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors" tristate "Host AP driver for Prism2.5 PCI adaptors"
...@@ -81,7 +81,7 @@ config HOSTAP_PCI ...@@ -81,7 +81,7 @@ config HOSTAP_PCI
driver. driver.
The driver can be compiled as a module and will be named The driver can be compiled as a module and will be named
"hostap_pci.ko". hostap_pci.
config HOSTAP_CS config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards" tristate "Host AP driver for Prism2/2.5/3 PC Cards"
...@@ -94,4 +94,4 @@ config HOSTAP_CS ...@@ -94,4 +94,4 @@ config HOSTAP_CS
driver. driver.
The driver can be compiled as a module and will be named The driver can be compiled as a module and will be named
"hostap_cs.ko". hostap_cs.
...@@ -75,7 +75,7 @@ config IWLAGN ...@@ -75,7 +75,7 @@ config IWLAGN
If you want to compile the driver as a module ( = code which can be If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want), inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwlagn.ko. module will be called iwlagn.
config IWL4965 config IWL4965
...@@ -113,7 +113,7 @@ config IWL3945 ...@@ -113,7 +113,7 @@ config IWL3945
If you want to compile the driver as a module ( = code which can be If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want), inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.ko. module will be called iwl3945.
config IWL3945_SPECTRUM_MEASUREMENT config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver" bool "Enable Spectrum Measurement in iwl3945 driver"
......
...@@ -9,11 +9,11 @@ menuconfig RT2X00 ...@@ -9,11 +9,11 @@ menuconfig RT2X00
When building one of the individual drivers, the rt2x00 library When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as will also be created. That library (when the driver is built as
a module) will be called "rt2x00lib.ko". a module) will be called rt2x00lib.
Additionally PCI and USB libraries will also be build depending Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be on the types of drivers being selected, these libraries will be
called "rt2x00pci.ko" and "rt2x00usb.ko". called rt2x00pci and rt2x00usb.
if RT2X00 if RT2X00
...@@ -26,7 +26,7 @@ config RT2400PCI ...@@ -26,7 +26,7 @@ config RT2400PCI
This adds support for rt2400 wireless chipset family. This adds support for rt2400 wireless chipset family.
Supported chips: RT2460. Supported chips: RT2460.
When compiled as a module, this driver will be called "rt2400pci.ko". When compiled as a module, this driver will be called rt2400pci.
config RT2500PCI config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support" tristate "Ralink rt2500 (PCI/PCMCIA) support"
...@@ -37,7 +37,7 @@ config RT2500PCI ...@@ -37,7 +37,7 @@ config RT2500PCI
This adds support for rt2500 wireless chipset family. This adds support for rt2500 wireless chipset family.
Supported chips: RT2560. Supported chips: RT2560.
When compiled as a module, this driver will be called "rt2500pci.ko". When compiled as a module, this driver will be called rt2500pci.
config RT61PCI config RT61PCI
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
...@@ -51,7 +51,7 @@ config RT61PCI ...@@ -51,7 +51,7 @@ config RT61PCI
This adds support for rt2501 wireless chipset family. This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661. Supported chips: RT2561, RT2561S & RT2661.
When compiled as a module, this driver will be called "rt61pci.ko". When compiled as a module, this driver will be called rt61pci.
config RT2500USB config RT2500USB
tristate "Ralink rt2500 (USB) support" tristate "Ralink rt2500 (USB) support"
...@@ -62,7 +62,7 @@ config RT2500USB ...@@ -62,7 +62,7 @@ config RT2500USB
This adds support for rt2500 wireless chipset family. This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572. Supported chips: RT2571 & RT2572.
When compiled as a module, this driver will be called "rt2500usb.ko". When compiled as a module, this driver will be called rt2500usb.
config RT73USB config RT73USB
tristate "Ralink rt2501/rt73 (USB) support" tristate "Ralink rt2501/rt73 (USB) support"
...@@ -75,7 +75,7 @@ config RT73USB ...@@ -75,7 +75,7 @@ config RT73USB
This adds support for rt2501 wireless chipset family. This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671. Supported chips: RT2571W, RT2573 & RT2671.
When compiled as a module, this driver will be called "rt73usb.ko". When compiled as a module, this driver will be called rt73usb.
config RT2X00_LIB_PCI config RT2X00_LIB_PCI
tristate tristate
......
...@@ -8,7 +8,7 @@ config LCS ...@@ -8,7 +8,7 @@ config LCS
Select this option if you want to use LCS networking on IBM System z. Select this option if you want to use LCS networking on IBM System z.
This device driver supports Token Ring (IEEE 802.5), This device driver supports Token Ring (IEEE 802.5),
FDDI (IEEE 802.7) and Ethernet. FDDI (IEEE 802.7) and Ethernet.
To compile as a module, choose M. The module name is lcs.ko. To compile as a module, choose M. The module name is lcs.
If you do not know what it is, it's safe to choose Y. If you do not know what it is, it's safe to choose Y.
config CTCM config CTCM
...@@ -21,7 +21,7 @@ config CTCM ...@@ -21,7 +21,7 @@ config CTCM
It also supports virtual CTCs when running under VM. It also supports virtual CTCs when running under VM.
This driver also supports channel-to-channel MPC SNA devices. This driver also supports channel-to-channel MPC SNA devices.
MPC is an SNA protocol device used by Communication Server for Linux. MPC is an SNA protocol device used by Communication Server for Linux.
To compile as a module, choose M. The module name is ctcm.ko. To compile as a module, choose M. The module name is ctcm.
To compile into the kernel, choose Y. To compile into the kernel, choose Y.
If you do not need any channel-to-channel connection, choose N. If you do not need any channel-to-channel connection, choose N.
...@@ -34,7 +34,7 @@ config NETIUCV ...@@ -34,7 +34,7 @@ config NETIUCV
link between VM guests. Using ifconfig a point-to-point connection link between VM guests. Using ifconfig a point-to-point connection
can be established to the Linux on IBM System z can be established to the Linux on IBM System z
running on the other VM guest. To compile as a module, choose M. running on the other VM guest. To compile as a module, choose M.
The module name is netiucv.ko. If unsure, choose Y. The module name is netiucv. If unsure, choose Y.
config SMSGIUCV config SMSGIUCV
tristate "IUCV special message support (VM only)" tristate "IUCV special message support (VM only)"
...@@ -50,7 +50,7 @@ config CLAW ...@@ -50,7 +50,7 @@ config CLAW
This driver supports channel attached CLAW devices. This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices CLAW is Common Link Access for Workstation. Common devices
that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices. that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
To compile as a module, choose M. The module name is claw.ko. To compile as a module, choose M. The module name is claw.
To compile into the kernel, choose Y. To compile into the kernel, choose Y.
config QETH config QETH
...@@ -65,14 +65,14 @@ config QETH ...@@ -65,14 +65,14 @@ config QETH
<http://www.ibm.com/developerworks/linux/linux390> <http://www.ibm.com/developerworks/linux/linux390>
To compile this driver as a module, choose M. To compile this driver as a module, choose M.
The module name is qeth.ko. The module name is qeth.
config QETH_L2 config QETH_L2
tristate "qeth layer 2 device support" tristate "qeth layer 2 device support"
depends on QETH depends on QETH
help help
Select this option to be able to run qeth devices in layer 2 mode. Select this option to be able to run qeth devices in layer 2 mode.
To compile as a module, choose M. The module name is qeth_l2.ko. To compile as a module, choose M. The module name is qeth_l2.
If unsure, choose y. If unsure, choose y.
config QETH_L3 config QETH_L3
...@@ -80,7 +80,7 @@ config QETH_L3 ...@@ -80,7 +80,7 @@ config QETH_L3
depends on QETH depends on QETH
help help
Select this option to be able to run qeth devices in layer 3 mode. Select this option to be able to run qeth devices in layer 3 mode.
To compile as a module choose M. The module name is qeth_l3.ko. To compile as a module choose M. The module name is qeth_l3.
If unsure, choose Y. If unsure, choose Y.
config QETH_IPV6 config QETH_IPV6
......
...@@ -861,7 +861,7 @@ config SERIAL_UARTLITE ...@@ -861,7 +861,7 @@ config SERIAL_UARTLITE
Say Y here if you want to use the Xilinx uartlite serial controller. Say Y here if you want to use the Xilinx uartlite serial controller.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called uartlite.ko. module will be called uartlite.
config SERIAL_UARTLITE_CONSOLE config SERIAL_UARTLITE_CONSOLE
bool "Support for console on Xilinx uartlite serial port" bool "Support for console on Xilinx uartlite serial port"
......
...@@ -8,7 +8,7 @@ menuconfig W1 ...@@ -8,7 +8,7 @@ menuconfig W1
If you want W1 support, you should say Y here. If you want W1 support, you should say Y here.
This W1 support can also be built as a module. If so, the module This W1 support can also be built as a module. If so, the module
will be called wire.ko. will be called wire.
if W1 if W1
......
...@@ -12,7 +12,7 @@ config W1_MASTER_MATROX ...@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
using Matrox's G400 GPIO pins. using Matrox's G400 GPIO pins.
This support is also available as a module. If so, the module This support is also available as a module. If so, the module
will be called matrox_w1.ko. will be called matrox_w1.
config W1_MASTER_DS2490 config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire" tristate "DS2490 USB <-> W1 transport layer for 1-wire"
...@@ -22,7 +22,7 @@ config W1_MASTER_DS2490 ...@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
for example DS9490*. for example DS9490*.
This support is also available as a module. If so, the module This support is also available as a module. If so, the module
will be called ds2490.ko. will be called ds2490.
config W1_MASTER_DS2482 config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge" tristate "Maxim DS2482 I2C to 1-Wire bridge"
...@@ -56,7 +56,7 @@ config W1_MASTER_GPIO ...@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
GPIO pins. This driver uses the GPIO API to control the wire. GPIO pins. This driver uses the GPIO API to control the wire.
This support is also available as a module. If so, the module This support is also available as a module. If so, the module
will be called w1-gpio.ko. will be called w1-gpio.
config HDQ_MASTER_OMAP config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver" tristate "OMAP HDQ driver"
......
...@@ -531,7 +531,7 @@ config SBC8360_WDT ...@@ -531,7 +531,7 @@ config SBC8360_WDT
Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called sbc8360.ko. module will be called sbc8360.
Most people will say N. Most people will say N.
......
...@@ -168,7 +168,7 @@ config IPV6_SIT ...@@ -168,7 +168,7 @@ config IPV6_SIT
into IPv4 packets. This is useful if you want to connect two IPv6 into IPv4 packets. This is useful if you want to connect two IPv6
networks over an IPv4-only path. networks over an IPv4-only path.
Saying M here will produce a module called sit.ko. If unsure, say Y. Saying M here will produce a module called sit. If unsure, say Y.
config IPV6_NDISC_NODETYPE config IPV6_NDISC_NODETYPE
bool bool
......
...@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK ...@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
If you want to compile it as a module, say M here and read If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called <file:Documentation/kbuild/modules.txt>. The module will be called
ipt_CONNMARK.ko. If unsure, say `N'. ipt_CONNMARK. If unsure, say `N'.
config NETFILTER_XT_TARGET_CONNSECMARK config NETFILTER_XT_TARGET_CONNSECMARK
tristate '"CONNSECMARK" target support' tristate '"CONNSECMARK" target support'
...@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK ...@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
If you want to compile it as a module, say M here and read If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. The module will be called <file:Documentation/kbuild/modules.txt>. The module will be called
ipt_connmark.ko. If unsure, say `N'. ipt_connmark. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNTRACK config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support' tristate '"conntrack" connection tracking match support'
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment