usb: host: xhci support option to disable the xHCI USB2 HW LPM

XHCI specification 1.1 does not require xHCI-compliant controllers
to always enable hardware USB2 LPM. However, the current xHCI
driver always enable it when seeing HLC=1.
This patch supports an option for users to control disabling
USB2 Hardware LPM via DT/ACPI attribute.
This option is needed in case user would like to disable this
feature. For example, their xHCI controller has its USB2 HW LPM
broken.
Signed-off-by: Tung Nguyen <tunguyen@apm.com>
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -26,6 +26,7 @@ Required properties:
 
 Optional properties:
   - clocks: reference to a clock
+  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
 

drivers/usb/host/xhci-plat.c

@@ -259,6 +259,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
+	if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
+		xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
 	if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 

drivers/usb/host/xhci.c

@@ -4087,7 +4087,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num + 1);
 
-	if (enable) {
+	if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) {
 		/* Host supports BESL timeout instead of HIRD */
 		if (udev->usb2_hw_lpm_besl_capable) {
 			/* if device doesn't have a preferred BESL value use a

drivers/usb/host/xhci.h

@@ -1828,6 +1828,7 @@ struct xhci_hcd {
 #define XHCI_LIMIT_ENDPOINT_INTERVAL_7	(1 << 26)
 #define XHCI_U2_DISABLE_WAKE	(1 << 27)
 #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	(1 << 28)
+#define XHCI_HW_LPM_DISABLE	(1 << 29)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;