Merge with mainline.

CREDITS

@@ -2846,6 +2846,7 @@ S: 76131 Karlsruhe
 S: Germany
 
 N: James Simmons 
+E: jsimmons@infradead.org
 E: jsimmons@users.sf.net 
 D: Frame buffer device maintainer
 D: input layer developement 

Documentation/fb/intel810.txt

+Intel 810/815 Framebuffer driver
+ 	Tony Daplas <adaplas@pol.net>
+	http://i810fb.sourceforge.net
+
+	March 17, 2002
+
+	First Released: July 2001
+================================================================
+
+A. Introduction
+	This is a framebuffer driver for various Intel 810/815 compatible
+graphics devices.  These would include:
+
+	Intel 810
+	Intel 810E
+	Intel 810-DC100
+	Intel 815 Internal graphics only, 100Mhz FSB
+	Intel 815 Internal graphics only
+	Intel 815 Internal graphics and AGP
+
+B.  Features
+
+        - Choice of using Discrete Video Timings, VESA Generalized Timing
+	  Formula, or a framebuffer specific database to set the video mode
+
+	- Supports a variable range of horizontal and vertical resolution, and
+	  vertical refresh rates if the VESA Generalized Timing Formula is 
+	  enabled.
+
+        - Supports color depths of 8, 16, 24 and 32 bits per pixel
+
+	- Supports pseudocolor, directcolor, or truecolor visuals
+
+        - Full and optimized hardware acceleration at 8, 16 and 24 bpp
+
+	- Robust video state save and restore
+
+        - MTRR support 
+
+	- Utilizes user-entered monitor specifications to automatically
+	  calculate required video mode parameters.
+
+	- Can concurrently run with xfree86 running with native i810 drivers 
+
+	- Hardware Cursor Support
+ 
+C.  List of available options
+	
+   a. "video=i810fb"  
+	enables the i810 driver
+
+	Recommendation: required
+ 
+   b. "xres:<value>"  
+	select horizontal resolution in pixels
+
+	Recommendation: user preference 
+	(default = 640)
+
+   c. "yres:<value>"
+	select vertical resolution in scanlines. If Discrete Video Timings
+	is enabled, this will be ignored and computed as 3*xres/4.  
+
+	Recommendation: user preference
+	(default = 480)
+		
+   d. "vyres:<value>" 
+	select virtual vertical resolution in scanlines. If (0) or none
+	is specified, this will be computed against maximum available memory. 
+
+	Recommendation: do not set
+	(default = 480)
+
+   e. "vram:<value>"
+	select amount of system RAM in MB to allocate for the video memory 
+
+	Recommendation: 1 - 4 MB.
+	(default = 4)
+
+   f. "bpp:<value>"   
+	select desired pixel depth 
+
+	Recommendation: 8
+	(default = 8)
+
+   g. "hsync1/hsync2:<value>" 
+	select the minimum and maximum Horizontal Sync Frequency of the 
+	monitor in KHz.  If a using a fixed frequency monitor, hsync1 must 
+	be equal to hsync2. 
+
+	Recommendation: check monitor manual for correct values
+	default (29/30)
+
+   h. "vsync1/vsync2:<value>" 
+	select the minimum and maximum Vertical Sync Frequency of the monitor
+	in Hz. You can also use this option to lock your monitor's refresh 
+	rate.
+
+	Recommendation: check monitor manual for correct values
+	(default = 60/60)
+
+	IMPORTANT:  If you need to clamp your timings, try to give some 
+	leeway for computational errors (over/underflows).  Example: if 
+	using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least
+	a 1 unit difference, and vice versa.
+
+   i. "voffset:<value>"	
+        select at what offset in MB of the logical memory to allocate the 
+	framebuffer memory.  The intent is to avoid the memory blocks
+	used by standard graphics applications (XFree86).  The default
+        offset (16 MB for a 64MB aperture, 8 MB for a 32MB aperture) will
+        avoid XFree86's usage and allows up to 7MB/15MB of framebuffer
+        memory.  Depending on your usage, adjust the value up or down, 
+	(0 for maximum usage, 31/63 MB for the least amount).  Note, an 
+	arbitrary setting may conflict with XFree86.
+
+	Recommendation: do not set
+	(default = 8 or 16 MB)
+      
+   j. "accel" 
+	enable text acceleration.  This can be enabled/reenabled anytime 
+	by using 'fbset -accel true/false'. 
+
+	Recommendation: enable
+	(default = not set) 
+
+   k. "mtrr" 
+	enable MTRR.  This allows data transfers to the framebuffer memory
+	to occur in bursts which can significantly increase performance.
+	Not very helpful with the i810/i815 because of 'shared memory'. 
+
+	Recommendation: do not set
+	(default = not set) 
+
+   l. "extvga"
+	if specified, secondary/external VGA output will always be enabled.
+	Useful if the BIOS turns off the VGA port when no monitor is attached.
+	The external VGA monitor can then be attached without rebooting. 
+
+	Recommendation: do not set
+	(default = not set)
+	
+   m. "sync" 
+	Forces the hardware engine to do a "sync" or wait for the hardware
+	to finish before starting another instruction. This will produce a 
+	more stable setup, but will be slower.
+
+	Recommendation: do not set
+	(default = not set)
+
+   n. "dcolor"
+        Use directcolor visual instead of truecolor for pixel depths greater
+	than 8 bpp.  Useful for color tuning, such as gamma control.
+
+	Recommendation: do not set
+	(default = not set)
+			
+D. Kernel booting
+
+Separate each option/option-pair by commas (,) and the option from its value
+with a colon (:) as in the following:
+
+video=i810fb:option1,option2:value2
+
+Sample Usage
+------------
+
+In /etc/lilo.conf, add the line:
+
+append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
+        vsync1:50,vsync2:85,accel,mtrr"
+
+This will initialize the framebuffer to 1024x768 at 8bpp.  The framebuffer
+will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate 
+will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.  
+
+IMPORTANT:
+You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
+better than 640x480 at 60Hz.
+
+E.  Module options
+	
+	The module parameters are essentially similar to the kernel 
+parameters. The main difference is that you need to include a Boolean value 
+(1 for TRUE, and 0 for FALSE) for those options which don't need a value. 
+
+Example, to enable MTRR, include "mtrr=1".
+
+Sample Usage
+------------
+
+Using the same setup as described above, load the module like this:
+
+	modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \
+	         vsync2=85 accel=1 mtrr=1
+
+Or just add the following to /etc/modules.conf
+
+	options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \
+	vsync2=85 accel=1 mtrr=1
+
+and just do a 
+
+	modprobe i810fb
+
+
+F.  Setup
+
+	a. Do your usual method of configuring the kernel. 
+	
+	make menuconfig/xconfig/config
+
+	b. Under "Code Maturity Options", enable "Prompt for experimental/
+	   incomplete code/drivers".
+
+ 	c. Enable agpgart support for the Intel 810/815 on-board graphics.
+	   This is required.  The option is under "Character Devices"
+
+	d. Under "Graphics Support", select "Intel 810/815" either statically
+	   or as a module.  Choose "use VESA GTF for video timings"  if you 
+	   need to maximize the capability of your display.  To be on the 
+	   safe side, you can leave this unselected.  
+  
+        e. If you want a framebuffer console, enable it under "Console 
+	   Drivers"
+
+	f. Compile your kernel. 
+	  	
+	g. Load the driver as described in section D and E.
+	
+	Optional:	
+	h.  If you are going to run XFree86 with its native drivers, the 
+	    standard XFree86 4.1.0 and 4.2.0 drivers should work as is.
+            However, there's a bug in the XFree86 i810 drivers.  It attempts 
+	    to use XAA even when switched to the console. This will crash
+	    your server. I have a fix at this site:  
+	    
+	    http://i810fb.sourceforge.net.  
+
+	    You can either use the patch, or just replace 
+	    
+            /usr/X11R6/lib/modules/drivers/i810_drv.o
+
+	    with the one provided at the website. 	
+
+	i.  Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver
+	    patch to see the chipset in action (or inaction :-).
+
+G.  Acknowledgment:
+	
+	1.  Geert Uytterhoeven - his excellent howto and the virtual
+                                 framebuffer driver code made this possible.
+
+	2.  Jeff Hartmann for his agpgart code.  
+
+	3.  The X developers.  Insights were provided just by reading the
+	    XFree86 source code.
+
+	4.  Intel(c).  For this value-oriented chipset driver and for
+            providing documentation.
+
+	5. Matt Sottek.  His inputs and ideas  helped in making some
+	optimizations possible.
+
+H.  Home Page:
+
+	A more complete, and probably updated information is provided at
+http://i810fb.sourceforge.net.
+
+###########################
+Tony
+

MAINTAINERS

@@ -644,7 +644,7 @@ S:	Supported
 
 FRAMEBUFFER LAYER
 P:	James Simmons, Geert Uytterhoeven	
-M:	jsimmons@users.sf.net, geert@linux-m68k.org	
+M:	jsimmons@infradead.org, geert@linux-m68k.org	
 L:	linux-fbdev-devel@lists.sourceforge.net	
 W:	http://www.linux-fbdev.org
 S:	Supported

Makefile

 VERSION = 2
 PATCHLEVEL = 5
-SUBLEVEL = 53
+SUBLEVEL = 54
 EXTRAVERSION =
 
 # *DOCUMENTATION*

arch/alpha/kernel/osf_sys.c

@@ -35,6 +35,7 @@
 #include <linux/ipc.h>
 #include <linux/namei.h>
 #include <linux/uio.h>
+#include <linux/vfs.h>
 
 #include <asm/fpu.h>
 #include <asm/io.h>

arch/arm/kernel/module.c

@@ -67,18 +67,12 @@ void module_free(struct module *module, void *region)
 	vfree(region);
 }
 
-long
-module_core_size(const Elf32_Ehdr *hdr, const Elf32_Shdr *sechdrs,
-		 const char *secstrings, struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
-	return module->core_size;
-}
-
-long
-module_init_size(const Elf32_Ehdr *hdr, const Elf32_Shdr *sechdrs,
-		 const char *secstrings, struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
 int
@@ -88,7 +82,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	Elf32_Shdr *symsec = sechdrs + symindex;
 	Elf32_Shdr *relsec = sechdrs + relindex;
 	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
-	Elf32_Rel *rel = (void *)relsec->sh_offset;
+	Elf32_Rel *rel = (void *)relsec->sh_addr;
 	unsigned int i;
 
 	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
@@ -103,7 +97,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			return -ENOEXEC;
 		}
 
-		sym = ((Elf32_Sym *)symsec->sh_offset) + offset;
+		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: unknown symbol %s\n",
 				module->name, strtab + sym->st_name);
@@ -118,7 +112,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			return -ENOEXEC;
 		}
 
-		loc = dstsec->sh_offset + rel->r_offset;
+		loc = dstsec->sh_addr + rel->r_offset;
 
 		switch (ELF32_R_TYPE(rel->r_info)) {
 		case R_ARM_ABS32:

arch/i386/kernel/module.c

@@ -45,20 +45,12 @@ void module_free(struct module *mod, void *module_region)
 }
 
 /* We don't need anything special. */
-long module_core_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
-	return module->core_size;
-}
-
-long module_init_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
 int apply_relocate(Elf32_Shdr *sechdrs,
@@ -68,7 +60,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 		   struct module *me)
 {
 	unsigned int i;
-	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_offset;
+	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	uint32_t *location;
 
@@ -76,10 +68,10 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 		/* This is the symbol it is referring to */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_offset
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
 			+ ELF32_R_SYM(rel[i].r_info);
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

arch/ia64/ia32/sys_ia32.c

@@ -48,6 +48,7 @@
 #include <linux/stat.h>
 #include <linux/ipc.h>
 #include <linux/compat.h>
+#include <linux/vfs.h>
 
 #include <asm/types.h>
 #include <asm/uaccess.h>

arch/mips/kernel/sysirix.c

@@ -22,6 +22,7 @@
 #include <linux/smp_lock.h>
 #include <linux/utsname.h>
 #include <linux/file.h>
+#include <linux/vfs.h>
 
 #include <asm/ptrace.h>
 #include <asm/page.h>

arch/mips64/kernel/linux32.c

@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/dnotify.h>
 #include <linux/compat.h>
+#include <linux/vfs.h>
 #include <net/sock.h>
 
 #include <asm/uaccess.h>

arch/parisc/hpux/sys_hpux.c

@@ -10,6 +10,7 @@
 #include <linux/smp_lock.h>
 #include <linux/utsname.h>
 #include <linux/vmalloc.h>
+#include <linux/vfs.h>
 
 #include <asm/errno.h>
 #include <asm/pgalloc.h>

arch/parisc/kernel/sys_parisc32.c

@@ -52,6 +52,7 @@
 #include <linux/mman.h>
 #include <linux/binfmts.h>
 #include <linux/namei.h>
+#include <linux/vfs.h>
 
 #include <asm/types.h>
 #include <asm/uaccess.h>

arch/ppc/kernel/module.c

@@ -101,24 +101,31 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
 	return ret;
 }
 
-long module_core_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(Elf32_Ehdr *hdr,
+			      Elf32_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *me)
 {
-	module->arch.core_plt_offset = ALIGN(module->core_size, 4);
-	return module->arch.core_plt_offset
-		+ get_plt_size(hdr, sechdrs, secstrings, 0);
-}
+	unsigned int i;
 
-long module_init_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	module->arch.init_plt_offset = ALIGN(module->init_size, 4);
-	return module->arch.init_plt_offset
-		+ get_plt_size(hdr, sechdrs, secstrings, 1);
+	/* Find .plt and .pltinit sections */
+	for (i = 0; i < hdr->e_shnum; i++) {
+		if (strcmp(secstrings + sechdrs[i].sh_name, ".plt.init") == 0)
+			me->arch.init_plt_section = i;
+		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
+			me->arch.core_plt_section = i;
+	}
+	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
+		printk("Module doesn't contain .plt or .plt.init sections.\n");
+		return -ENOEXEC;
+	}
+
+	/* Override their sizes */
+	sechdrs[me->arch.core_plt_section].sh_size
+		= get_plt_size(hdr, sechdrs, secstrings, 0);
+	sechdrs[me->arch.init_plt_section].sh_size
+		= get_plt_size(hdr, sechdrs, secstrings, 1);
+	return 0;
 }
 
 int apply_relocate(Elf32_Shdr *sechdrs,
@@ -141,17 +148,20 @@ static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 }
 
 /* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call(void *location, Elf32_Addr val, struct module *mod)
+static uint32_t do_plt_call(void *location,
+			    Elf32_Addr val, 
+			    Elf32_Shdr *sechdrs,
+			    struct module *mod)
 {
 	struct ppc_plt_entry *entry;
 
 	DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
 	/* Init, or core PLT? */
 	if (location >= mod->module_core
-	    && location < mod->module_core + mod->arch.core_plt_offset)
-		entry = mod->module_core + mod->arch.core_plt_offset;
+	    && location < mod->module_core + mod->core_size)
+		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
 	else
-		entry = mod->module_init + mod->arch.init_plt_offset;
+		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
 
 	/* Find this entry, or if that fails, the next avail. entry */
 	while (entry->jump[0]) {
@@ -176,7 +186,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		       struct module *module)
 {
 	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_offset;
+	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	uint32_t *location;
 	uint32_t value;
@@ -185,10 +195,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
 		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rela[i].r_offset;
 		/* This is the symbol it is referring to */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_offset
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
 			+ ELF32_R_SYM(rela[i].r_info);
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
@@ -220,7 +230,8 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		case R_PPC_REL24:
 			if ((int)(value - (uint32_t)location) < -0x02000000
 			    || (int)(value - (uint32_t)location) >= 0x02000000)
-				value = do_plt_call(location, value, module);
+				value = do_plt_call(location, value,
+						    sechdrs, module);
 
 			/* Only replace bits 2 through 26 */
 			DEBUGP("REL24 value = %08X. location = %08X\n",

arch/s390/kernel/module.c

@@ -51,26 +51,15 @@ void module_free(struct module *mod, void *module_region)
            table entries. */
 }
 
-/* s390/s390x needs additional memory for GOT/PLT sections. */
-long module_core_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
 	// FIXME: add space needed for GOT/PLT
-	return module->core_size;
-}
-
-long module_init_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
-
-
 int apply_relocate(Elf_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -78,7 +67,7 @@ int apply_relocate(Elf_Shdr *sechdrs,
 		   struct module *me)
 {
 	unsigned int i;
-	ElfW(Rel) *rel = (void *)sechdrs[relsec].sh_offset;
+	ElfW(Rel) *rel = (void *)sechdrs[relsec].sh_addr;
 	ElfW(Sym) *sym;
 	ElfW(Addr) *location;
 
@@ -86,10 +75,10 @@ int apply_relocate(Elf_Shdr *sechdrs,
 	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 		/* This is the symbol it is referring to */
-		sym = (ElfW(Sym) *)sechdrs[symindex].sh_offset
+		sym = (ElfW(Sym) *)sechdrs[symindex].sh_addr
 			+ ELFW(R_SYM)(rel[i].r_info);
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

arch/s390x/kernel/linux32.c

@@ -57,6 +57,7 @@
 #include <linux/sysctl.h>
 #include <linux/binfmts.h>
 #include <linux/compat.h>
+#include <linux/vfs.h>
 
 #include <asm/types.h>
 #include <asm/ipc.h>

arch/s390x/kernel/module.c

@@ -52,25 +52,15 @@ void module_free(struct module *mod, void *module_region)
 }
 
 /* s390/s390x needs additional memory for GOT/PLT sections. */
-long module_core_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
 	// FIXME: add space needed for GOT/PLT
-	return module->core_size;
-}
-
-long module_init_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
-
-
 int apply_relocate(Elf_Shdr *sechdrs,
 		   const char *strtab,
 		   unsigned int symindex,
@@ -78,7 +68,7 @@ int apply_relocate(Elf_Shdr *sechdrs,
 		   struct module *me)
 {
 	unsigned int i;
-	ElfW(Rel) *rel = (void *)sechdrs[relsec].sh_offset;
+	ElfW(Rel) *rel = (void *)sechdrs[relsec].sh_addr;
 	ElfW(Sym) *sym;
 	ElfW(Addr) *location;
 
@@ -86,10 +76,10 @@ int apply_relocate(Elf_Shdr *sechdrs,
 	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 		/* This is the symbol it is referring to */
-		sym = (ElfW(Sym) *)sechdrs[symindex].sh_offset
+		sym = (ElfW(Sym) *)sechdrs[symindex].sh_addr
 			+ ELFW(R_SYM)(rel[i].r_info);
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

arch/sparc/kernel/module.c

@@ -37,20 +37,12 @@ void module_free(struct module *mod, void *module_region)
 }
 
 /* We don't need anything special. */
-long module_core_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
-	return module->core_size;
-}
-
-long module_init_size(const Elf32_Ehdr *hdr,
-		      const Elf32_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
 int apply_relocate(Elf32_Shdr *sechdrs,
@@ -71,7 +63,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		       struct module *me)
 {
 	unsigned int i;
-	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_offset;
+	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	u8 *location;
 	u32 *loc32;
@@ -80,11 +72,11 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		Elf32_Addr v;
 
 		/* This is where to make the change */
-		location = (u8 *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (u8 *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 		loc32 = (u32 *) location;
 		/* This is the symbol it is referring to */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_offset
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
 			+ ELF32_R_SYM(rel[i].r_info);
 		if (!(v = sym->st_value)) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

arch/sparc64/kernel/module.c

@@ -144,20 +144,12 @@ void module_free(struct module *mod, void *module_region)
 }
 
 /* We don't need anything special. */
-long module_core_size(const Elf64_Ehdr *hdr,
-		      const Elf64_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
-	return module->core_size;
-}
-
-long module_init_size(const Elf64_Ehdr *hdr,
-		      const Elf64_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
 int apply_relocate(Elf64_Shdr *sechdrs,
@@ -178,7 +170,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		       struct module *me)
 {
 	unsigned int i;
-	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_offset;
+	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf64_Sym *sym;
 	u8 *location;
 	u32 *loc32;
@@ -187,14 +179,14 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		Elf64_Addr v;
 
 		/* This is where to make the change */
-		location = (u8 *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		location = (u8 *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 		loc32 = (u32 *) location;
 
 		BUG_ON(((u64)location >> (u64)32) != (u64)0);
 
 		/* This is the symbol it is referring to */
-		sym = (Elf64_Sym *)sechdrs[symindex].sh_offset
+		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
 			+ ELF64_R_SYM(rel[i].r_info);
 		if (!(v = sym->st_value)) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

arch/sparc64/kernel/sys_sparc32.c

@@ -52,6 +52,7 @@
 #include <linux/dnotify.h>
 #include <linux/security.h>
 #include <linux/compat.h>
+#include <linux/vfs.h>
 
 #include <asm/types.h>
 #include <asm/ipc.h>

arch/sparc64/solaris/fs.c

@@ -20,6 +20,7 @@
 #include <linux/resource.h>
 #include <linux/quotaops.h>
 #include <linux/mount.h>
+#include <linux/vfs.h>
 
 #include <asm/uaccess.h>
 #include <asm/string.h>

arch/v850/kernel/module.c

@@ -160,7 +160,7 @@ int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
 			struct module *mod)
 {
 	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_offset;
+	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
 
 	DEBUGP ("Applying relocate section %u to %u\n", relsec,
 		sechdrs[relsec].sh_info);
@@ -168,11 +168,11 @@ int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
 		/* This is where to make the change */
 		uint32_t *loc
-			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			   + rela[i].r_offset);
 		/* This is the symbol it is referring to */
 		Elf32_Sym *sym
-			= ((Elf32_Sym *)sechdrs[symindex].sh_offset
+			= ((Elf32_Sym *)sechdrs[symindex].sh_addr
 			   + ELF32_R_SYM (rela[i].r_info));
 		uint32_t val = sym->st_value;
 

arch/x86_64/ia32/sys_ia32.c

@@ -58,6 +58,7 @@
 #include <linux/init.h>
 #include <linux/aio_abi.h>
 #include <linux/compat.h>
+#include <linux/vfs.h>
 #include <asm/mman.h>
 #include <asm/types.h>
 #include <asm/uaccess.h>

arch/x86_64/kernel/module.c

@@ -26,20 +26,12 @@
 #define DEBUGP(fmt...) 
  
 /* We don't need anything special. */
-long module_core_size(const Elf64_Ehdr *hdr,
-		      const Elf64_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
+int module_frob_arch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs,
+			      const char *secstrings,
+			      struct module *mod)
 {
-	return module->core_size;
-}
-
-long module_init_size(const Elf64_Ehdr *hdr,
-		      const Elf64_Shdr *sechdrs,
-		      const char *secstrings,
-		      struct module *module)
-{
-	return module->init_size;
+	return 0;
 }
 
 int apply_relocate_add(Elf64_Shdr *sechdrs,
@@ -49,7 +41,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		   struct module *me)
 {
 	unsigned int i;
-	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_offset;
+	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf64_Sym *sym;
 	void *loc;
 	u64 val; 
@@ -58,11 +50,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+		loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
 			+ rel[i].r_offset;
 
 		/* This is the symbol it is referring to */
-		sym = (Elf64_Sym *)sechdrs[symindex].sh_offset
+		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
 			+ ELF64_R_SYM(rel[i].r_info);
 		if (!sym->st_value) {
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",

drivers/char/vt.c

@@ -130,7 +130,7 @@ extern void console_map_init(void);
 extern void prom_con_init(void);
 #endif
 #ifdef CONFIG_MDA_CONSOLE
-extern void mda_console_init(void);
+extern int mda_console_init(void);
 #endif
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
 extern int fb_console_init(void);

drivers/media/radio/miropcm20-rds.c

@@ -119,9 +119,6 @@ static int __init miropcm20_rds_init(void)
 		return -EINVAL;
 
 	printk("miropcm20-rds: userinterface driver loaded.\n");
-#if DEBUG
-	printk("v4l-name: %s\n", devfs_get_name(pcm20_radio.devfs_handle, 0));
-#endif
 	return 0;
 }
 

drivers/message/fusion/linux_compat.h

@@ -246,35 +246,17 @@ static __inline__ int __get_order(unsigned long size)
 #endif
 
 /*
- *  We use our new error handling code if the kernel version is 2.5.1 or newer.
+ *  We use our new error handling code if the kernel version is 2.4.18 or newer.
  */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,1)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,18)
         #define MPT_SCSI_USE_NEW_EH
 #endif
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
-#define mptscsih_lock(iocp, flags) \
-                spin_lock_irqsave(&iocp->FreeQlock, flags)
-#else
-#define mptscsih_lock(iocp, flags) \
-({	save_flags(flags); \
-	cli(); \
-})
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
-#define mptscsih_unlock(iocp, flags) \
-                spin_unlock_irqrestore(&iocp->FreeQlock, flags)
-#else
-#define mptscsih_unlock(iocp, flags)  restore_flags(flags);
-#endif
-
-
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
-#define mpt_work_struct work_struct 
+#define mpt_work_struct work_struct
 #define MPT_INIT_WORK(_task, _func, _data) INIT_WORK(_task, _func, _data)
 #else
-#define mpt_work_struct tq_struct 
+#define mpt_work_struct tq_struct
 #define MPT_INIT_WORK(_task, _func, _data) \
 ({	(_task)->sync = 0; \
 	(_task)->routine = (_func); \
@@ -282,6 +264,13 @@ static __inline__ int __get_order(unsigned long size)
 })
 #endif
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
+#define mptscsih_sync_irq(_irq) synchronize_irq(_irq)
+#else
+#define mptscsih_sync_irq(_irq) synchronize_irq()
+#endif
+
+
 
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif /* _LINUX_COMPAT_H */

drivers/message/fusion/mptbase.h

@@ -13,7 +13,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptbase.h,v 1.136 2002/10/21 13:51:54 pdelaney Exp $
+ *  $Id: mptbase.h,v 1.141 2002/12/03 21:26:32 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -80,8 +80,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2002 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"2.03.00.02"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-2.03.00.02"
+#define MPT_LINUX_VERSION_COMMON	"2.03.01.01"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-2.03.01.01"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -134,8 +134,10 @@
 #define	 CAN_SLEEP			1
 #define  NO_SLEEP			0
 
-/* 
- * SCSI transfer rate defines. 
+#define MPT_COALESCING_TIMEOUT		0x10
+
+/*
+ * SCSI transfer rate defines.
  */
 #define MPT_ULTRA320			0x08
 #define MPT_ULTRA160			0x09
@@ -524,7 +526,7 @@ typedef struct _mpt_ioctl_events {
 #define MPT_SCSICFG_DV_PENDING		0x04	/* DV on this physical id pending */
 #define MPT_SCSICFG_DV_NOT_DONE		0x08	/* DV has not been performed */
 #define MPT_SCSICFG_BLK_NEGO		0x10	/* WriteSDP1 with WDTR and SDTR disabled */
-
+#define MPT_SCSICFG_RELOAD_IOC_PG3	0x20	/* IOC Pg 3 data is obsolete */
 						/* Args passed to writeSDP1: */
 #define MPT_SCSICFG_USE_NVRAM		0x01	/* WriteSDP1 using NVRAM */
 #define MPT_SCSICFG_ALL_IDS		0x02	/* WriteSDP1 to all IDS */
@@ -756,6 +758,12 @@ typedef struct _mpt_sge {
 #define nehprintk(x)
 #endif
 
+#if defined(MPT_DEBUG_CONFIG) || defined(MPT_DEBUG)
+#define dcprintk(x) printk x
+#else
+#define dcprintk(x)
+#endif
+
 #define MPT_INDEX_2_MFPTR(ioc,idx) \
 	(MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) )
 
@@ -1009,6 +1017,7 @@ extern int	 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
 extern int	 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 extern void	*mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size, int *frags, int *alloc_sz);
 extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc, fw_image_t **alt_img);
+extern int	 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 
 /*
  *  Public data decl's...

drivers/message/fusion/mptctl.c

@@ -34,7 +34,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptctl.c,v 1.61 2002/10/17 20:15:57 pdelaney Exp $
+ *  $Id: mptctl.c,v 1.63 2002/12/03 21:26:33 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -2911,9 +2911,9 @@ int __init mptctl_init(void)
 #endif		/*} sparc */
 
 	/* Register this device */
-	if (misc_register(&mptctl_miscdev) == -1) {
+	err = misc_register(&mptctl_miscdev);
+	if (err < 0) {
 		printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR);
-		err = -EBUSY;
 		goto out_fail;
 	}
 	printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n");

drivers/message/fusion/mptctl.h

@@ -20,7 +20,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptctl.h,v 1.12 2002/10/17 20:15:58 pdelaney Exp $
+ *  $Id: mptctl.h,v 1.13 2002/12/03 21:26:33 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*

drivers/message/fusion/mptscsih.h

@@ -20,7 +20,7 @@
  *  (mailto:netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptscsih.h,v 1.20 2002/10/17 20:16:00 pdelaney Exp $
+ *  $Id: mptscsih.h,v 1.21 2002/12/03 21:26:35 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -73,9 +73,16 @@
  *	Try to keep these at 2^N-1
  */
 #define MPT_FC_CAN_QUEUE	63
-//#define MPT_SCSI_CAN_QUEUE	31
-#define MPT_SCSI_CAN_QUEUE	MPT_FC_CAN_QUEUE
-#define MPT_SCSI_CMD_PER_LUN	 7
+#if defined MPT_SCSI_USE_NEW_EH
+	#define MPT_SCSI_CAN_QUEUE	127
+#else
+	#define MPT_SCSI_CAN_QUEUE	63
+#endif
+
+#define MPT_SCSI_CMD_PER_DEV_HIGH	31
+#define MPT_SCSI_CMD_PER_DEV_LOW	7
+
+#define MPT_SCSI_CMD_PER_LUN		7
 
 #define MPT_SCSI_MAX_SECTORS    8192
 
@@ -206,11 +213,16 @@ struct mptscsih_driver_setup
 #define x_scsi_dev_reset	mptscsih_dev_reset
 #define x_scsi_host_reset	mptscsih_host_reset
 #define x_scsi_bios_param	mptscsih_bios_param
-#define x_scsi_slave_configure	mptscsih_slave_configure
 
 #define x_scsi_taskmgmt_bh	mptscsih_taskmgmt_bh
 #define x_scsi_old_abort	mptscsih_old_abort
 #define x_scsi_old_reset	mptscsih_old_reset
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
+#define x_scsi_slave_configure	mptscsih_slave_configure
+#else
+#define x_scsi_select_queue_depths	mptscsih_select_queue_depths
+#endif
+#define x_scsi_proc_info	mptscsih_proc_info
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -237,8 +249,14 @@ extern	int		 x_scsi_bios_param(Disk *, struct block_device *, int *);
 #else
 extern	int		 x_scsi_bios_param(Disk *, kdev_t, int *);
 #endif
-extern	int		 x_scsi_slave_configure(Scsi_Device *);
 extern	void		 x_scsi_taskmgmt_bh(void *);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
+extern	int		 x_scsi_slave_configure(Scsi_Device *);
+#else
+extern	void		 x_scsi_select_queue_depths(struct Scsi_Host *, Scsi_Device *);
+#endif
+
+extern	int		 x_scsi_proc_info(char *, char **, off_t, int, int, int);
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
 #define PROC_SCSI_DECL
@@ -248,14 +266,19 @@ extern	void		 x_scsi_taskmgmt_bh(void *);
 
 #ifdef MPT_SCSI_USE_NEW_EH
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,44)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
 
 #define MPT_SCSIHOST {						\
 	PROC_SCSI_DECL						\
+	.proc_info			= x_scsi_proc_info,	\
 	.name				= "MPT SCSI Host",	\
 	.detect				= x_scsi_detect,	\
 	.release			= x_scsi_release,	\
 	.info				= x_scsi_info,		\
+	.command			= NULL,			\
+	.queuecommand			= x_scsi_queuecommand,	\
+	.slave_configure		= x_scsi_slave_configure,	\
+	.eh_strategy_handler		= NULL,			\
 	.eh_abort_handler		= x_scsi_abort,		\
 	.eh_device_reset_handler	= x_scsi_dev_reset,	\
 	.eh_bus_reset_handler		= x_scsi_bus_reset,	\
@@ -275,6 +298,7 @@ extern	void		 x_scsi_taskmgmt_bh(void *);
 #define MPT_SCSIHOST {						\
 	.next				= NULL,			\
 	PROC_SCSI_DECL						\
+	.proc_info			= x_scsi_proc_info,	\
 	.name				= "MPT SCSI Host",	\
 	.detect				= x_scsi_detect,	\
 	.release			= x_scsi_release,	\

drivers/net/ppp_generic.c

@@ -1841,7 +1841,6 @@ ppp_register_channel(struct ppp_channel *chan)
 	list_add(&pch->list, &new_channels);
 	atomic_inc(&channel_count);
 	spin_unlock_bh(&all_channels_lock);
-	MOD_INC_USE_COUNT;
 	return 0;
 }
 
@@ -1904,7 +1903,6 @@ ppp_unregister_channel(struct ppp_channel *chan)
 	wake_up_interruptible(&pch->file.rwait);
 	if (atomic_dec_and_test(&pch->file.refcnt))
 		ppp_destroy_channel(pch);
-	MOD_DEC_USE_COUNT;
 }
 
 /*

drivers/net/pppox.c

@@ -40,25 +40,18 @@ static struct pppox_proto *proto[PX_MAX_PROTO+1];
 
 int register_pppox_proto(int proto_num, struct pppox_proto *pp)
 {
-	if (proto_num < 0 || proto_num > PX_MAX_PROTO) {
+	if (proto_num < 0 || proto_num > PX_MAX_PROTO)
 		return -EINVAL;
-	}
-
 	if (proto[proto_num])
 		return -EALREADY;
-
-	MOD_INC_USE_COUNT;
-
 	proto[proto_num] = pp;
 	return 0;
 }
 
 void unregister_pppox_proto(int proto_num)
 {
-	if (proto_num >= 0 && proto_num <= PX_MAX_PROTO) {
+	if (proto_num >= 0 && proto_num <= PX_MAX_PROTO)
 		proto[proto_num] = NULL;
-		MOD_DEC_USE_COUNT;
-	}
 }
 
 void pppox_unbind_sock(struct sock *sk)

drivers/net/slhc.c

@@ -95,7 +95,6 @@ slhc_init(int rslots, int tslots)
 	register struct cstate *ts;
 	struct slcompress *comp;
 
-	MOD_INC_USE_COUNT;
 	comp = (struct slcompress *)kmalloc(sizeof(struct slcompress),
 					    GFP_KERNEL);
 	if (! comp)
@@ -147,7 +146,6 @@ slhc_init(int rslots, int tslots)
 out_free:
 	kfree((unsigned char *)comp);
 out_fail:
-	MOD_DEC_USE_COUNT;
 	return NULL;
 }
 
@@ -166,7 +164,6 @@ slhc_free(struct slcompress *comp)
 		kfree( comp->rstate );
 
 	kfree( comp );
-	MOD_DEC_USE_COUNT;
 }
 
 
@@ -685,7 +682,6 @@ slhc_remember(struct slcompress *comp, unsigned char *icp, int isize)
 	return isize;
 }
 
-
 int
 slhc_toss(struct slcompress *comp)
 {

drivers/video/Kconfig

@@ -295,27 +295,21 @@ config FB_VGA16
 	  vga16fb.o.
 
 config FB_STI
-	bool "Generic STI frame buffer device support"
+	bool "HP STI frame buffer device support"
 	depends on FB && PARISC
+	default y
 	---help---
 	  STI refers to the HP "Standard Text Interface" which is a set of
 	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will implement the linux framebuffer device and
-	  an fbcon color text console using calls to the STI BIOS routines.
-	  The HP framebuffer device is usually planar, uses a strange memory
-	  layout, and changing the plane mask to create colored pixels
-	  requires a call to the STI routines, so do not expect /dev/fb to
-	  actually be useful.  However, it is the best we have as far as
-	  graphics on the HP chipsets due to lack of hardware level
-	  documentation for the various on-board HP chipsets used in these
-	  systems.  It is sufficient for basic text console functions,
-	  including fonts.
-
-	  You should probably enable this option, unless you are having
-	  trouble getting video when booting the kernel (make sure it isn't
-	  just that you are running the console on the serial port, though).
-	  Really old HP boxes may not have STI, and must use the PDC BIOS
-	  console or the IODC BIOS.
+	  Enabling this option will implement the linux framebuffer device
+	  using calls to the STI BIOS routines for initialisation.
+	
+	  If you enable this option, you will get a planar framebuffer device
+	  /dev/fb which will work on the most common HP graphic cards of the
+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+	  It is safe to enable this option, so you should probably say "Y".
 
 config FB_MAC
 	bool "Generic Macintosh display support"
@@ -471,6 +465,44 @@ config FB_RIVA
 	  module will be called rivafb.o. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 
+config FB_I810
+	tristate "Intel 810/815 support (EXPERIMENTAL)"
+	depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI	
+	help
+	  This driver supports the on-board graphics built in to the Intel 810 
+          and 815 chipsets.  Say Y if you have and plan to use such a board.
+
+          The driver is also available as a module ( = code which can be
+          inserted and removed from the running kernel whenever you want). 
+          The module will be called i810fb.o. If you want to compile it as a
+          module, say M here and read <file:Documentation/modules.txt>.
+
+          For more information, please read 
+	  <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+	bool "use VESA Generalized Timing Formula"
+	depends on FB_I810
+	help
+	  If you say Y, then the VESA standard, Generalized Timing Formula 
+          or GTF, will be used to calculate the required video timing values
+	  per video mode.  Since the GTF allows nondiscrete timings 
+          (nondiscrete being a range of values as opposed to discrete being a
+          set of values), you'll be able to use any combination of horizontal 
+	  and vertical resolutions, and vertical refresh rates without having
+	  to specify your own timing parameters.  This is especially useful
+	  to maximize the performance of an aging display, or if you just 
+          have a display with nonstandard dimensions. A VESA compliant 
+	  monitor is recommended, but can still work with non-compliant ones.
+	  If you need or want this, then select this option. The timings may 
+	  not be compliant with Intel's recommended values. Use at your own 
+	  risk.
+
+          If you say N, the driver will revert to discrete video timings 
+	  using a set recommended by Intel in their documentation.
+  
+          If unsure, say N.
+
 config FB_MATROX
 	tristate "Matrox acceleration"
 	depends on FB && PCI
@@ -759,7 +791,7 @@ config FB_TRIDENT
 
 	  The driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
-	  module will be called rivafb.o. If you want to compile it as a
+	  module will be called tridentfb.o. If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.
 
 config FB_PM3

drivers/video/Makefile

@@ -12,8 +12,7 @@ export-objs    	:= fbmem.o fbcmap.o fbmon.o modedb.o softcursor.o cfbfillrect.o
 
 obj-$(CONFIG_VT)		  += console/
 
-# Add fbmon.o back into obj-$(CONFIG_FB) in 2.5.x
-obj-$(CONFIG_FB)                  += fbmem.o fbcmap.o modedb.o softcursor.o
+obj-$(CONFIG_FB)                  += fbmem.o fbmon.o fbcmap.o modedb.o softcursor.o
 # Only include macmodes.o if we have FB support and are PPC
 ifeq ($(CONFIG_FB),y)
 obj-$(CONFIG_PPC)                 += macmodes.o
@@ -27,13 +26,13 @@ obj-$(CONFIG_FB_APOLLO)           += dnfb.o cfbfillrect.o cfbimgblt.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o
 obj-$(CONFIG_FB_ATY128)           += aty128fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_RADEON)		  += radeonfb.o
+obj-$(CONFIG_FB_RADEON)		  += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IGA)              += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblit.o
+obj-$(CONFIG_FB_IGA)              += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CONTROL)          += controlfb.o
 obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
 obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
-obj-$(CONFIG_FB_CT65550)          += chipsfb.o
+obj-$(CONFIG_FB_CT65550)          += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_ANAKIN)           += anakinfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_CYBER)            += cyberfb.o
@@ -42,7 +41,7 @@ obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbim
 obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
 obj-$(CONFIG_FB_MAC)              += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
 obj-$(CONFIG_FB_HP300)            += hpfb.o cfbfillrect.o cfbimgblt.o
-obj-$(CONFIG_FB_OF)               += offb.o cfbfillrect.o cfbimgblit.o cfbcopyarea.o
+obj-$(CONFIG_FB_OF)               += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
 obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
 obj-$(CONFIG_FB_RETINAZ3)         += retz3fb.o
 obj-$(CONFIG_FB_CLGEN)            += clgenfb.o
@@ -63,7 +62,7 @@ obj-$(CONFIG_FB_TCX)              += tcxfb.o sbusfb.o
 obj-$(CONFIG_FB_CGFOURTEEN)       += cgfourteenfb.o sbusfb.o
 obj-$(CONFIG_FB_P9100)            += p9100fb.o sbusfb.o
 obj-$(CONFIG_FB_LEO)              += leofb.o sbusfb.o
-obj-$(CONFIG_FB_STI)	          += stifb.o console/sticore.o
+obj-$(CONFIG_FB_STI)              += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_PMAG_BA)          += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_PMAGB_B)          += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_MAXINE)           += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
@@ -74,6 +73,8 @@ obj-$(CONFIG_FB_RIVA)		  += riva/ cfbfillrect.o cfbcopyarea.o \
 	                             cfbimgblt.o vgastate.o
 obj-$(CONFIG_FB_SIS)		  += sis/
 obj-$(CONFIG_FB_ATY)		  += aty/ cfbimgblt.o
+obj-$(CONFIG_FB_I810)             += i810/ cfbfillrect.o cfbcopyarea.o \
+	                             cfbimgblt.o vgastate.o
 
 obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
@@ -82,7 +83,7 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt
 obj-$(CONFIG_FB_HIT)              += hitfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_E1355)            += epson1355fb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_VOODOO1)          += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 
 # Files generated that shall be removed upon make clean
 clean-files := promcon_tbl.c

drivers/video/aty/atyfb_base.c

@@ -70,7 +70,7 @@
 
 #ifdef __powerpc__
 #include <asm/prom.h>
-#include <video/macmodes.h>
+#include "../macmodes.h"
 #endif
 #ifdef __sparc__
 #include <asm/pbm.h>
@@ -84,9 +84,6 @@
 #ifdef CONFIG_BOOTX_TEXT
 #include <asm/btext.h>
 #endif
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
@@ -226,14 +223,9 @@ static char *mode_option __initdata = NULL;
 #endif
 
 #ifdef CONFIG_PPC
-#ifdef CONFIG_NVRAM_NOT_DEFINED
-static int default_vmode __initdata = VMODE_NVRAM;
-static int default_cmode __initdata = CMODE_NVRAM;
-#else
 static int default_vmode __initdata = VMODE_CHOOSE;
 static int default_cmode __initdata = CMODE_CHOOSE;
 #endif
-#endif
 
 #ifdef CONFIG_ATARI
 static unsigned int mach64_count __initdata = 0;
@@ -984,6 +976,7 @@ static int atyfb_release(struct fb_info *info, int user)
 						var.yres_virtual =
 						    var.yres;
 				}
+				fb_set_var(&var, -1, info);
 			}
 		}
 	} 
@@ -1246,8 +1239,8 @@ static void atyfb_save_palette(struct atyfb_par *par, int enter)
 
 static void atyfb_palette(int enter)
 {
-	struct fb_info *info;
 	struct atyfb_par *par;
+	struct fb_info *info;
 	int i;
 
 	for (i = 0; i < FB_MAX; i++) {
@@ -1409,16 +1402,16 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par)
 static int aty_sleep_notify(struct pmu_sleep_notifier *self, int when)
 {
 	struct fb_info *info;
-	struct atyfb_par *par = (struct atyfb_par *) info->fb.par;
+	struct atyfb_par *par; 
 	int result;
 
 	result = PBOOK_SLEEP_OK;
 
 	for (info = first_display; info != NULL; info = par->next) {
-		struct fb_fix_screeninfo fix;
 		int nb;
 
-		nb = fb_display[fg_console].var.yres * info->fix.line_length;
+		par = (struct atyfb_par *) info->fb.par;
+		nb = info->var.yres * info->fix.line_length;
 
 		switch (when) {
 		case PBOOK_SLEEP_REQUEST:
@@ -1436,7 +1429,7 @@ static int aty_sleep_notify(struct pmu_sleep_notifier *self, int when)
 			if (par->blitter_may_be_busy)
 				wait_for_idle(par);
 			/* Stop accel engine (stop bus mastering) */
-			if (par->accel_flags & FB_ACCELF_TEXT)
+			if (info->accel_flags & FB_ACCELF_TEXT)
 				aty_reset_engine(par);
 
 			/* Backup fb content */
@@ -1841,14 +1834,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 			    (&var, info, mode_option, 8))
 				var = default_var;
 		} else {
-#ifdef CONFIG_NVRAM
-			if (default_vmode == VMODE_NVRAM) {
-				default_vmode = nvram_read_byte(NV_VMODE);
-				if (default_vmode <= 0
-				    || default_vmode > VMODE_MAX)
-					default_vmode = VMODE_CHOOSE;
-			}
-#endif
 			if (default_vmode == VMODE_CHOOSE) {
 				if (M64_HAS(G3_PB_1024x768))
 					/* G3 PowerBook with 1024x768 LCD */
@@ -1870,10 +1855,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 			if (default_vmode <= 0
 			    || default_vmode > VMODE_MAX)
 				default_vmode = VMODE_640_480_60;
-#ifdef CONFIG_NVRAM
-			if (default_cmode == CMODE_NVRAM)
-				default_cmode = nvram_read_byte(NV_CMODE);
-#endif
 			if (default_cmode < CMODE_8
 			    || default_cmode > CMODE_32)
 				default_cmode = CMODE_8;

drivers/video/aty128fb.c

@@ -56,8 +56,6 @@
 #include <asm/uaccess.h>
 #include <linux/fb.h>
 #include <linux/init.h>
-#include <linux/selection.h>
-#include <linux/console.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
@@ -65,10 +63,7 @@
 #ifdef CONFIG_ALL_PPC
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
-#include <video/macmodes.h>
-#ifdef CONFIG_NVRAM
-#include <linux/nvram.h>
-#endif
+#include "macmodes.h"
 #endif
 
 #ifdef CONFIG_ADB_PMU
@@ -285,7 +280,6 @@ struct aty128_constants {
 
 struct aty128_crtc {
 	u32 gen_cntl;
-	u32 ext_cntl;
 	u32 h_total, h_sync_strt_wid;
 	u32 v_total, v_sync_strt_wid;
 	u32 pitch;
@@ -326,10 +320,13 @@ struct aty128fb_par {
 	unsigned char *save_framebuffer;
 	int	pm_reg;
 	int crt_on, lcd_on;
+	struct pci_dev *pdev;
+	struct fb_info *next;
 #endif
-	unsigned char red[64];	/* see comments in aty128fb_setcolreg */
-	unsigned char green[64];
-	unsigned char blue[64];
+	u8	red[32];		/* see aty128fb_setcolreg */
+	u8	green[64];
+	u8	blue[32];
+	u32	pseudo_palette[16];	/* used for TRUECOLOR */
 };
 
 #ifdef CONFIG_PMAC_PBOOK
@@ -337,6 +334,7 @@ int aty128_sleep_notify(struct pmu_sleep_notifier *self, int when);
 static struct pmu_sleep_notifier aty128_sleep_notifier = {
 	aty128_sleep_notify, SLEEP_LEVEL_VIDEO,
 };
+static struct fb_info *aty128_fb = NULL;
 #endif
 
 #define round_div(n, d) ((n+(d/2))/d)
@@ -1203,7 +1201,11 @@ aty128fb_set_par(struct fb_info *info)
 { 
 	struct aty128fb_par *par = info->par;
 	u32 config;
-    
+	int err;
+
+	if ((err = aty128_decode_var(&info->var, par)) != 0)
+		return err;
+
 	if (par->blitter_may_be_busy)
 		wait_for_idle(par);
 
@@ -1271,15 +1273,22 @@ static int
 aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par)
 {
 	int err;
+	struct aty128_crtc crtc;
+	struct aty128_pll pll;
+	struct aty128_ddafifo fifo_reg;
 
-	if ((err = aty128_var_to_crtc(var, &par->crtc, par)))
+	if ((err = aty128_var_to_crtc(var, &crtc, par)))
 		return err;
 
-	if ((err = aty128_var_to_pll(var->pixclock, &par->pll, par)))
+	if ((err = aty128_var_to_pll(var->pixclock, &pll, par)))
 		return err;
 
-	if ((err = aty128_ddafifo(&par->fifo_reg, &par->pll, par->crtc.depth, par)))
+	if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par)))
 		return err;
+
+	par->crtc = crtc;
+	par->pll = pll;
+	par->fifo_reg = fifo_reg;
 	par->accel_flags = var->accel_flags;
 
 	return 0;
@@ -1312,12 +1321,13 @@ aty128_encode_var(struct fb_var_screeninfo *var,
 static int
 aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
-	struct aty128fb_par *par = info->par;
+	struct aty128fb_par par;
 	int err;
 
-	if ((err = aty128_decode_var(var, par)) != 0)
+	par = *(struct aty128fb_par *)info->par;
+	if ((err = aty128_decode_var(var, &par)) != 0)
 		return err;
-	aty128_encode_var(var, par);
+	aty128_encode_var(var, &par);
 	return 0;
 }
 
@@ -1602,7 +1612,12 @@ aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 #endif /* CONFIG_PMAC_BACKLIGHT */
 #ifdef CONFIG_PMAC_PBOOK
 	par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	pmu_register_sleep_notifier(&aty128_sleep_notifier);
+	if (aty128_fb == NULL) {
+		/* XXX can only put one chip to sleep */
+		aty128_fb = info;
+	} else
+		printk(KERN_WARNING "aty128fb: can only sleep one Rage 128\n");
+	par->pdev = pdev;
 #endif
 
 	printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
@@ -1647,8 +1662,7 @@ aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* We have the resources. Now virtualize them */
-	size = sizeof(struct fb_info) + sizeof(struct aty128fb_par) +
-			 sizeof(u32)*16;
+	size = sizeof(struct fb_info) + sizeof(struct aty128fb_par);
 	if (!(info = kmalloc(size, GFP_ATOMIC))) {
 		printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n");
 		goto err_unmap_out;
@@ -1656,9 +1670,7 @@ aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memset(info, 0, size);
 
 	par = (struct aty128fb_par *)(info + 1);
-	info->pseudo_palette = (void *) (par + 1);
-
-	memset(info, 0, sizeof(struct fb_info));
+	info->pseudo_palette = par->pseudo_palette;
 
 	info->par = par;
 	info->fix = aty128fb_fix;
@@ -1758,6 +1770,10 @@ static void __devexit aty128_remove(struct pci_dev *pdev)
 			   pci_resource_len(pdev, 1));
 	release_mem_region(pci_resource_start(pdev, 2),
 			   pci_resource_len(pdev, 2));
+#ifdef CONFIG_PMAC_PBOOK
+	if (info == aty128_fb)
+		aty128_fb = NULL;
+#endif
 	kfree(info);
 }
 #endif /* CONFIG_PCI */
@@ -2008,7 +2024,7 @@ aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		}
 	}
 
-	if (par->crtc.depth == 16) {
+	if (par->crtc.depth == 16 && regno > 0) {
 		/*
 		 * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we
 		 * have 32 slots for R and B values but 64 slots for G values.
@@ -2016,12 +2032,13 @@ aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		 * goes in a different slot, and we have to avoid disturbing
 		 * the other fields in the slots we touch.
 		 */
-		par->red[regno] = red;
 		par->green[regno] = green;
-		par->blue[regno] = blue;
-		if (regno > 0 && regno < 32)
+		if (regno < 32) {
+			par->red[regno] = red;
+			par->blue[regno] = blue;
 			aty128_st_pal(regno * 8, red, par->green[regno*2],
 				      blue, par);
+		}
 		red = par->red[regno/2];
 		blue = par->blue[regno/2];
 		regno <<= 2;
@@ -2213,6 +2230,7 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 {
 	u32	pmgt;
 	u16	pwr_command;
+	struct pci_dev *pdev = par->pdev;
 
 	if (!par->pm_reg)
 		return;
@@ -2237,17 +2255,16 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 		aty_st_le32(BUS_CNTL1, 0x00000010);
 		aty_st_le32(MEM_POWER_MISC, 0x0c830000);
 		mdelay(100);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 		/* Switch PCI power management to D2 */
-		pci_write_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL,
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
 			(pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 	} else {
 		/* Switch back PCI power management to D0 */
 		mdelay(100);
-		pci_write_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, 0);
-		mdelay(100);
-		pci_read_config_word(par->pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
 		mdelay(100);
 	}
 }
@@ -2259,10 +2276,13 @@ aty128_set_suspend(struct aty128fb_par *par, int suspend)
 int
 aty128_sleep_notify(struct pmu_sleep_notifier *self, int when)
 {
- 	int result = PBOOK_SLEEP_OK, nb;
-	struct fb_info *info = info;	/* FIXME!!! How do find which framebuffer  */
-	struct aty128fb_par *par = info->par;
+ 	int nb;
+	struct fb_info *info = aty128_fb;
+	struct aty128fb_par *par;
 
+	if (info == NULL)
+		return PBOOK_SLEEP_OK;
+	par = info->par;
 	nb = info->var.yres * info->fix.line_length;
 
 	switch (when) {
@@ -2311,17 +2331,23 @@ aty128_sleep_notify(struct pmu_sleep_notifier *self, int when)
 		aty128fb_blank(0, info);
 		break;
 	}
-	return result;
+	return PBOOK_SLEEP_OK;
 }
 #endif /* CONFIG_PMAC_PBOOK */
 
 int __init aty128fb_init(void)
 {
+#ifdef CONFIG_PMAC_PBOOK
+	pmu_register_sleep_notifier(&aty128_sleep_notifier);
+#endif
 	return pci_module_init(&aty128fb_driver);
 }
 
 static void __exit aty128fb_exit(void)
 {
+#ifdef CONFIG_PMAC_PBOOK
+	pmu_unregister_sleep_notifier(&aty128_sleep_notifier);
+#endif
 	pci_unregister_driver(&aty128fb_driver);
 }
 

drivers/video/console/font_6x11.c

@@ -4,7 +4,7 @@
 /*                                            */
 /**********************************************/
 
-#include "font.h"
+#include <linux/font.h>
 
 #define FONTDATAMAX (11*256)