Commit 47a8617c authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.1.12 : Add support for async scanning

Add support for async scanning

Notes: This is the async scan patch to our driver from Matthew Wilcox.
  The async scan logic is still subject to errors in insmod/rmmod, as
  the async scan threads don't get shutdown when the module unloads
  underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ebdbe65f
...@@ -200,6 +200,9 @@ void lpfc_mbuf_free(struct lpfc_hba *, void *, dma_addr_t); ...@@ -200,6 +200,9 @@ void lpfc_mbuf_free(struct lpfc_hba *, void *, dma_addr_t);
/* Function prototypes. */ /* Function prototypes. */
const char* lpfc_info(struct Scsi_Host *); const char* lpfc_info(struct Scsi_Host *);
void lpfc_scan_start(struct Scsi_Host *);
int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
void lpfc_get_cfgparam(struct lpfc_hba *); void lpfc_get_cfgparam(struct lpfc_hba *);
int lpfc_alloc_sysfs_attr(struct lpfc_hba *); int lpfc_alloc_sysfs_attr(struct lpfc_hba *);
void lpfc_free_sysfs_attr(struct lpfc_hba *); void lpfc_free_sysfs_attr(struct lpfc_hba *);
......
...@@ -418,33 +418,6 @@ lpfc_config_port_post(struct lpfc_hba * phba) ...@@ -418,33 +418,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
return (0); return (0);
} }
static int
lpfc_discovery_wait(struct lpfc_hba *phba)
{
int i = 0;
while ((phba->hba_state != LPFC_HBA_READY) ||
(phba->num_disc_nodes) || (phba->fc_prli_sent) ||
((phba->fc_map_cnt == 0) && (i<2)) ||
(phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
/* Check every second for 30 retries. */
i++;
if (i > 30) {
return -ETIMEDOUT;
}
if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
/* The link is down. Set linkdown timeout */
return -ETIMEDOUT;
}
/* Delay for 1 second to give discovery time to complete. */
msleep(1000);
}
return 0;
}
/************************************************************************/ /************************************************************************/
/* */ /* */
/* lpfc_hba_down_prep */ /* lpfc_hba_down_prep */
...@@ -1362,6 +1335,156 @@ lpfc_scsi_free(struct lpfc_hba * phba) ...@@ -1362,6 +1335,156 @@ lpfc_scsi_free(struct lpfc_hba * phba)
return 0; return 0;
} }
void lpfc_remove_device(struct lpfc_hba *phba)
{
unsigned long iflag;
lpfc_free_sysfs_attr(phba);
spin_lock_irqsave(phba->host->host_lock, iflag);
phba->fc_flag |= FC_UNLOADING;
spin_unlock_irqrestore(phba->host->host_lock, iflag);
fc_remove_host(phba->host);
scsi_remove_host(phba->host);
kthread_stop(phba->worker_thread);
/*
* Bring down the SLI Layer. This step disable all interrupts,
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
lpfc_sli_hba_down(phba);
lpfc_sli_brdrestart(phba);
/* Release the irq reservation */
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
lpfc_cleanup(phba);
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
/*
* Call scsi_free before mem_free since scsi bufs are released to their
* corresponding pools here.
*/
lpfc_scsi_free(phba);
lpfc_mem_free(phba);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
phba->slim2p, phba->slim2p_mapping);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
pci_release_regions(phba->pcidev);
pci_disable_device(phba->pcidev);
idr_remove(&lpfc_hba_index, phba->brd_no);
scsi_host_put(phba->host);
}
void lpfc_scan_start(struct Scsi_Host *host)
{
struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
if (lpfc_alloc_sysfs_attr(phba))
goto error;
phba->MBslimaddr = phba->slim_memmap_p;
phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
if (lpfc_sli_hba_setup(phba))
goto error;
/*
* hba setup may have changed the hba_queue_depth so we need to adjust
* the value of can_queue.
*/
host->can_queue = phba->cfg_hba_queue_depth - 10;
return;
error:
lpfc_remove_device(phba);
}
int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
if (!phba->host)
return 1;
if (time >= 30 * HZ)
goto finished;
if (phba->hba_state != LPFC_HBA_READY)
return 0;
if (phba->num_disc_nodes || phba->fc_prli_sent)
return 0;
if ((phba->fc_map_cnt == 0) && (time < 2 * HZ))
return 0;
if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)
return 0;
if ((phba->hba_state > LPFC_LINK_DOWN) || (time < 15 * HZ))
return 0;
finished:
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(shost->host_lock);
lpfc_poll_start_timer(phba);
spin_unlock_irq(shost->host_lock);
}
/*
* set fixed host attributes
* Must done after lpfc_sli_hba_setup()
*/
fc_host_node_name(shost) = wwn_to_u64(phba->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(phba->fc_portname.u.wwn);
fc_host_supported_classes(shost) = FC_COS_CLASS3;
memset(fc_host_supported_fc4s(shost), 0,
sizeof(fc_host_supported_fc4s(shost)));
fc_host_supported_fc4s(shost)[2] = 1;
fc_host_supported_fc4s(shost)[7] = 1;
lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost));
fc_host_supported_speeds(shost) = 0;
if (phba->lmt & LMT_10Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
if (phba->lmt & LMT_4Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
if (phba->lmt & LMT_2Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
if (phba->lmt & LMT_1Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
fc_host_maxframe_size(shost) =
((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
(uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
/* This value is also unchanging */
memset(fc_host_active_fc4s(shost), 0,
sizeof(fc_host_active_fc4s(shost)));
fc_host_active_fc4s(shost)[2] = 1;
fc_host_active_fc4s(shost)[7] = 1;
spin_lock_irq(shost->host_lock);
phba->fc_flag &= ~FC_LOADING;
spin_unlock_irq(shost->host_lock);
return 1;
}
static int __devinit static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
...@@ -1552,13 +1675,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) ...@@ -1552,13 +1675,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
host->transportt = lpfc_transport_template; host->transportt = lpfc_transport_template;
pci_set_drvdata(pdev, host); pci_set_drvdata(pdev, host);
error = scsi_add_host(host, &pdev->dev);
if (error)
goto out_kthread_stop;
error = lpfc_alloc_sysfs_attr(phba);
if (error)
goto out_remove_host;
if (phba->cfg_use_msi) { if (phba->cfg_use_msi) {
error = pci_enable_msi(phba->pcidev); error = pci_enable_msi(phba->pcidev);
...@@ -1574,73 +1690,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) ...@@ -1574,73 +1690,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0451 Enable interrupt handler failed\n", "%d:0451 Enable interrupt handler failed\n",
phba->brd_no); phba->brd_no);
goto out_free_sysfs_attr; goto out_kthread_stop;
} }
phba->MBslimaddr = phba->slim_memmap_p;
phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
error = lpfc_sli_hba_setup(phba); error = scsi_add_host(host, &pdev->dev);
if (error) { if (error)
error = -ENODEV;
goto out_free_irq; goto out_free_irq;
}
/*
* hba setup may have changed the hba_queue_depth so we need to adjust
* the value of can_queue.
*/
host->can_queue = phba->cfg_hba_queue_depth - 10;
lpfc_discovery_wait(phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(phba->host->host_lock);
lpfc_poll_start_timer(phba);
spin_unlock_irq(phba->host->host_lock);
}
/* scsi_scan_host(host);
* set fixed host attributes
* Must done after lpfc_sli_hba_setup()
*/
fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn);
fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn);
fc_host_supported_classes(host) = FC_COS_CLASS3;
memset(fc_host_supported_fc4s(host), 0,
sizeof(fc_host_supported_fc4s(host)));
fc_host_supported_fc4s(host)[2] = 1;
fc_host_supported_fc4s(host)[7] = 1;
lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host));
fc_host_supported_speeds(host) = 0;
if (phba->lmt & LMT_10Gb)
fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT;
if (phba->lmt & LMT_4Gb)
fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT;
if (phba->lmt & LMT_2Gb)
fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT;
if (phba->lmt & LMT_1Gb)
fc_host_supported_speeds(host) |= FC_PORTSPEED_1GBIT;
fc_host_maxframe_size(host) =
((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
(uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
/* This value is also unchanging */
memset(fc_host_active_fc4s(host), 0,
sizeof(fc_host_active_fc4s(host)));
fc_host_active_fc4s(host)[2] = 1;
fc_host_active_fc4s(host)[7] = 1;
spin_lock_irq(phba->host->host_lock);
phba->fc_flag &= ~FC_LOADING;
spin_unlock_irq(phba->host->host_lock);
return 0; return 0;
out_free_irq: out_free_irq:
...@@ -1648,11 +1706,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) ...@@ -1648,11 +1706,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->work_hba_events = 0; phba->work_hba_events = 0;
free_irq(phba->pcidev->irq, phba); free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev); pci_disable_msi(phba->pcidev);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(phba);
out_remove_host:
fc_remove_host(phba->host);
scsi_remove_host(phba->host);
out_kthread_stop: out_kthread_stop:
kthread_stop(phba->worker_thread); kthread_stop(phba->worker_thread);
out_free_iocbq: out_free_iocbq:
...@@ -1690,56 +1743,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) ...@@ -1690,56 +1743,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
{ {
struct Scsi_Host *host = pci_get_drvdata(pdev); struct Scsi_Host *host = pci_get_drvdata(pdev);
struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata; struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata;
unsigned long iflag;
lpfc_free_sysfs_attr(phba);
spin_lock_irqsave(phba->host->host_lock, iflag);
phba->fc_flag |= FC_UNLOADING;
spin_unlock_irqrestore(phba->host->host_lock, iflag);
fc_remove_host(phba->host);
scsi_remove_host(phba->host);
kthread_stop(phba->worker_thread);
/*
* Bring down the SLI Layer. This step disable all interrupts,
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
lpfc_sli_hba_down(phba);
lpfc_sli_brdrestart(phba);
/* Release the irq reservation */ lpfc_remove_device(phba);
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
lpfc_cleanup(phba);
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
/*
* Call scsi_free before mem_free since scsi bufs are released to their
* corresponding pools here.
*/
lpfc_scsi_free(phba);
lpfc_mem_free(phba);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p, phba->slim2p_mapping);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
pci_release_regions(phba->pcidev);
pci_disable_device(phba->pcidev);
idr_remove(&lpfc_hba_index, phba->brd_no);
scsi_host_put(phba->host);
pci_set_drvdata(pdev, NULL); pci_set_drvdata(pdev, NULL);
} }
......
...@@ -1351,6 +1351,8 @@ struct scsi_host_template lpfc_template = { ...@@ -1351,6 +1351,8 @@ struct scsi_host_template lpfc_template = {
.slave_alloc = lpfc_slave_alloc, .slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure, .slave_configure = lpfc_slave_configure,
.slave_destroy = lpfc_slave_destroy, .slave_destroy = lpfc_slave_destroy,
.scan_finished = lpfc_scan_finished,
.scan_start = lpfc_scan_start,
.this_id = -1, .this_id = -1,
.sg_tablesize = LPFC_SG_SEG_CNT, .sg_tablesize = LPFC_SG_SEG_CNT,
.cmd_per_lun = LPFC_CMD_PER_LUN, .cmd_per_lun = LPFC_CMD_PER_LUN,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment