Skip to content

L
linux
Commit 47cf40af authored by Miquel Raynal's avatar Miquel Raynal Committed by Gregory CLEMENT
Browse files
Options

arm64: dts: marvell: Prepare the introduction of CP115 

CP110 and CP115 are almost the same in terms of features and have a
very limited set of differences. Let's create an armada-cp11x.dtsi
file which will be used to instantiate both CP110 and CP115
nodes.

The only changes between the two armada-cp11{0,x}.dtsi files are the
following naming in macros: s/CP110/CP11X/.
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent 2bc26088
Hide whitespace changes
Inline Side-by-side
Showing with 627 additions and 615 deletions
arch/arm64/boot/dts/marvell/armada-70x0.dtsi
View file @ 47cf40af
......@@ -17,23 +17,23 @@ aliases {
/*
* Instantiate the CP110
*/
#define CP110_NAME cp0
#define CP110_BASE f2000000
#define CP110_PCIE_IO_BASE 0xf9000000
#define CP110_PCIE_MEM_BASE 0xf6000000
#define CP110_PCIE0_BASE f2600000
#define CP110_PCIE1_BASE f2620000
#define CP110_PCIE2_BASE f2640000
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
#define CP11X_PCIE_IO_BASE 0xf9000000
#define CP11X_PCIE_MEM_BASE 0xf6000000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
#undef CP110_NAME
#undef CP110_BASE
#undef CP110_PCIE_IO_BASE
#undef CP110_PCIE_MEM_BASE
#undef CP110_PCIE0_BASE
#undef CP110_PCIE1_BASE
#undef CP110_PCIE2_BASE
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
&cp0_gpio1 {
status = "okay";
......
arch/arm64/boot/dts/marvell/armada-80x0.dtsi
View file @ 47cf40af
......@@ -19,44 +19,44 @@ aliases {
/*
* Instantiate the master CP110
*/
#define CP110_NAME cp0
#define CP110_BASE f2000000
#define CP110_PCIE_IO_BASE 0xf9000000
#define CP110_PCIE_MEM_BASE 0xf6000000
#define CP110_PCIE0_BASE f2600000
#define CP110_PCIE1_BASE f2620000
#define CP110_PCIE2_BASE f2640000
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
#define CP11X_PCIE_IO_BASE 0xf9000000
#define CP11X_PCIE_MEM_BASE 0xf6000000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
#define CP11X_PCIE2_BASE f2640000
#include "armada-cp110.dtsi"
#undef CP110_NAME
#undef CP110_BASE
#undef CP110_PCIE_IO_BASE
#undef CP110_PCIE_MEM_BASE
#undef CP110_PCIE0_BASE
#undef CP110_PCIE1_BASE
#undef CP110_PCIE2_BASE
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
/*
* Instantiate the slave CP110
*/
#define CP110_NAME cp1
#define CP110_BASE f4000000
#define CP110_PCIE_IO_BASE 0xfd000000
#define CP110_PCIE_MEM_BASE 0xfa000000
#define CP110_PCIE0_BASE f4600000
#define CP110_PCIE1_BASE f4620000
#define CP110_PCIE2_BASE f4640000
#define CP11X_NAME cp1
#define CP11X_BASE f4000000
#define CP11X_PCIE_IO_BASE 0xfd000000
#define CP11X_PCIE_MEM_BASE 0xfa000000
#define CP11X_PCIE0_BASE f4600000
#define CP11X_PCIE1_BASE f4620000
#define CP11X_PCIE2_BASE f4640000
#include "armada-cp110.dtsi"
#undef CP110_NAME
#undef CP110_BASE
#undef CP110_PCIE_IO_BASE
#undef CP110_PCIE_MEM_BASE
#undef CP110_PCIE0_BASE
#undef CP110_PCIE1_BASE
#undef CP110_PCIE2_BASE
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
/* The 80x0 has two CP blocks, but uses only one block from each. */
&cp1_gpio1 {
......
arch/arm64/boot/dts/marvell/armada-common.dtsi
View file @ 47cf40af
......@@ -6,6 +6,6 @@
/* Common definitions used by Armada 7K/8K DTs */
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
arch/arm64/boot/dts/marvell/armada-cp110.dtsi
View file @ 47cf40af
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
* Copyright (C) 2019 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada CP110.
*/
#include <dt-bindings/interrupt-controller/mvebu-icu.h>
#include <dt-bindings/thermal/thermal.h>
#define CP11X_TYPE cp110
#include "armada-common.dtsi"
#include "armada-cp11x.dtsi"
#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
/ {
/*
* The contents of the node are defined below, in order to
* save one indentation level
*/
CP110_NAME: CP110_NAME { };
/*
* CPs only have one sensor in the thermal IC.
*
* The cooling maps are empty as there are no cooling devices.
*/
thermal-zones {
CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
polling-delay-passive = <0>; /* Interrupt driven */
polling-delay = <0>; /* Interrupt driven */
thermal-sensors = <&CP110_LABEL(thermal) 0>;
trips {
CP110_LABEL(crit): crit {
temperature = <100000>; /* mC degrees */
hysteresis = <2000>; /* mC degrees */
type = "critical";
};
};
cooling-maps { };
};
};
};
&CP110_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space@CP110_BASE {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
CP110_LABEL(ethernet): ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
<&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
<&CP110_LABEL(clk) 1 18>;
clock-names = "pp_clk", "gop_clk",
"mg_clk", "mg_core_clk", "axi_clk";
marvell,system-controller = <&CP110_LABEL(syscon0)>;
status = "disabled";
dma-coherent;
CP110_LABEL(eth0): eth0 {
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
<43 IRQ_TYPE_LEVEL_HIGH>,
<47 IRQ_TYPE_LEVEL_HIGH>,
<51 IRQ_TYPE_LEVEL_HIGH>,
<55 IRQ_TYPE_LEVEL_HIGH>,
<59 IRQ_TYPE_LEVEL_HIGH>,
<63 IRQ_TYPE_LEVEL_HIGH>,
<67 IRQ_TYPE_LEVEL_HIGH>,
<71 IRQ_TYPE_LEVEL_HIGH>,
<129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
CP110_LABEL(eth1): eth1 {
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
<44 IRQ_TYPE_LEVEL_HIGH>,
<48 IRQ_TYPE_LEVEL_HIGH>,
<52 IRQ_TYPE_LEVEL_HIGH>,
<56 IRQ_TYPE_LEVEL_HIGH>,
<60 IRQ_TYPE_LEVEL_HIGH>,
<64 IRQ_TYPE_LEVEL_HIGH>,
<68 IRQ_TYPE_LEVEL_HIGH>,
<72 IRQ_TYPE_LEVEL_HIGH>,
<128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
CP110_LABEL(eth2): eth2 {
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
<45 IRQ_TYPE_LEVEL_HIGH>,
<49 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>,
<57 IRQ_TYPE_LEVEL_HIGH>,
<61 IRQ_TYPE_LEVEL_HIGH>,
<65 IRQ_TYPE_LEVEL_HIGH>,
<69 IRQ_TYPE_LEVEL_HIGH>,
<73 IRQ_TYPE_LEVEL_HIGH>,
<127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
};
};
CP110_LABEL(comphy): phy@120000 {
compatible = "marvell,comphy-cp110";
reg = <0x120000 0x6000>;
marvell,system-controller = <&CP110_LABEL(syscon0)>;
clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
<&CP110_LABEL(clk) 1 18>;
clock-names = "mg_clk", "mg_core_clk", "axi_clk";
#address-cells = <1>;
#size-cells = <0>;
CP110_LABEL(comphy0): phy@0 {
reg = <0>;
#phy-cells = <1>;
};
CP110_LABEL(comphy1): phy@1 {
reg = <1>;
#phy-cells = <1>;
};
CP110_LABEL(comphy2): phy@2 {
reg = <2>;
#phy-cells = <1>;
};
CP110_LABEL(comphy3): phy@3 {
reg = <3>;
#phy-cells = <1>;
};
CP110_LABEL(comphy4): phy@4 {
reg = <4>;
#phy-cells = <1>;
};
CP110_LABEL(comphy5): phy@5 {
reg = <5>;
#phy-cells = <1>;
};
};
CP110_LABEL(mdio): mdio@12a200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
<&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
status = "disabled";
};
CP110_LABEL(xmdio): mdio@12a600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,xmdio";
reg = <0x12a600 0x10>;
clocks = <&CP110_LABEL(clk) 1 5>,
<&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
status = "disabled";
};
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
#address-cells = <1>;
#size-cells = <1>;
CP110_LABEL(icu_nsr): interrupt-controller@10 {
compatible = "marvell,cp110-icu-nsr";
reg = <0x10 0x20>;
#interrupt-cells = <2>;
interrupt-controller;
msi-parent = <&gicp>;
};
CP110_LABEL(icu_sei): interrupt-controller@50 {
compatible = "marvell,cp110-icu-sei";
reg = <0x50 0x10>;
#interrupt-cells = <2>;
interrupt-controller;
msi-parent = <&sei>;
};
};
CP110_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(syscon0): system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x2000>;
CP110_LABEL(clk): clock {
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
};
CP110_LABEL(gpio1): gpio@100 {
compatible = "marvell,armada-8k-gpio";
offset = <0x100>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
<85 IRQ_TYPE_LEVEL_HIGH>,
<84 IRQ_TYPE_LEVEL_HIGH>,
<83 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
status = "disabled";
};
CP110_LABEL(gpio2): gpio@140 {
compatible = "marvell,armada-8k-gpio";
offset = <0x140>;
ngpios = <31>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
<81 IRQ_TYPE_LEVEL_HIGH>,
<80 IRQ_TYPE_LEVEL_HIGH>,
<79 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
status = "disabled";
};
};
CP110_LABEL(syscon1): system-controller@400000 {
compatible = "syscon", "simple-mfd";
reg = <0x400000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
CP110_LABEL(thermal): thermal-sensor@70 {
compatible = "marvell,armada-cp110-thermal";
reg = <0x70 0x10>;
interrupts-extended =
<&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
};
CP110_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
};
CP110_LABEL(usb3_1): usb3@510000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
};
CP110_LABEL(sata0): sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
};
sata-port@1 {
reg = <1>;
};
};
CP110_LABEL(xor0): xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 8>,
<&CP110_LABEL(clk) 1 14>;
};
CP110_LABEL(xor1): xor@6c0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 7>,
<&CP110_LABEL(clk) 1 14>;
};
CP110_LABEL(spi0): spi@700600 {
compatible = "marvell,armada-380-spi";
reg = <0x700600 0x50>;
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(spi1): spi@700680 {
compatible = "marvell,armada-380-spi";
reg = <0x700680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(i2c0): i2c@701000 {
compatible = "marvell,mv78230-i2c";
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(i2c1): i2c@701100 {
compatible = "marvell,mv78230-i2c";
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(uart0): serial@702000 {
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(uart1): serial@702100 {
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(uart2): serial@702200 {
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(uart3): serial@702300 {
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
status = "disabled";
};
CP110_LABEL(nand_controller): nand@720000 {
/*
* Due to the limitation of the pins available
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
compatible = "marvell,armada-8k-nand-controller",
"marvell,armada370-nand-controller";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
marvell,system-controller = <&CP110_LABEL(syscon0)>;
status = "disabled";
};
CP110_LABEL(trng): trng@760000 {
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
status = "okay";
};
CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
status = "disabled";
};
CP110_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197b";
reg = <0x800000 0x200000>;
interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
<88 IRQ_TYPE_LEVEL_HIGH>,
<89 IRQ_TYPE_LEVEL_HIGH>,
<90 IRQ_TYPE_LEVEL_HIGH>,
<91 IRQ_TYPE_LEVEL_HIGH>,
<92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 26>,
<&CP110_LABEL(clk) 1 17>;
dma-coherent;
};
};
CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
<0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
status = "disabled";
};
CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
<0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
status = "disabled";
};
CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
<0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
status = "disabled";
};
};
#undef CP11X_TYPE
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi 0 → 100644
View file @ 47cf40af
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada CP11x.
*/
#include <dt-bindings/interrupt-controller/mvebu-icu.h>
#include <dt-bindings/thermal/thermal.h>
#include "armada-common.dtsi"
#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000))
#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
/ {
/*
* The contents of the node are defined below, in order to
* save one indentation level
*/
CP11X_NAME: CP11X_NAME { };
/*
* CPs only have one sensor in the thermal IC.
*
* The cooling maps are empty as there are no cooling devices.
*/
thermal-zones {
CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
polling-delay-passive = <0>; /* Interrupt driven */
polling-delay = <0>; /* Interrupt driven */
thermal-sensors = <&CP11X_LABEL(thermal) 0>;
trips {
CP11X_LABEL(crit): crit {
temperature = <100000>; /* mC degrees */
hysteresis = <2000>; /* mC degrees */
type = "critical";
};
};
cooling-maps { };
};
};
};
&CP11X_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
ranges;
config-space@CP11X_BASE {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
CP11X_LABEL(ethernet): ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
<&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
<&CP11X_LABEL(clk) 1 18>;
clock-names = "pp_clk", "gop_clk",
"mg_clk", "mg_core_clk", "axi_clk";
marvell,system-controller = <&CP11X_LABEL(syscon0)>;
status = "disabled";
dma-coherent;
CP11X_LABEL(eth0): eth0 {
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
<43 IRQ_TYPE_LEVEL_HIGH>,
<47 IRQ_TYPE_LEVEL_HIGH>,
<51 IRQ_TYPE_LEVEL_HIGH>,
<55 IRQ_TYPE_LEVEL_HIGH>,
<59 IRQ_TYPE_LEVEL_HIGH>,
<63 IRQ_TYPE_LEVEL_HIGH>,
<67 IRQ_TYPE_LEVEL_HIGH>,
<71 IRQ_TYPE_LEVEL_HIGH>,
<129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
CP11X_LABEL(eth1): eth1 {
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
<44 IRQ_TYPE_LEVEL_HIGH>,
<48 IRQ_TYPE_LEVEL_HIGH>,
<52 IRQ_TYPE_LEVEL_HIGH>,
<56 IRQ_TYPE_LEVEL_HIGH>,
<60 IRQ_TYPE_LEVEL_HIGH>,
<64 IRQ_TYPE_LEVEL_HIGH>,
<68 IRQ_TYPE_LEVEL_HIGH>,
<72 IRQ_TYPE_LEVEL_HIGH>,
<128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
CP11X_LABEL(eth2): eth2 {
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
<45 IRQ_TYPE_LEVEL_HIGH>,
<49 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>,
<57 IRQ_TYPE_LEVEL_HIGH>,
<61 IRQ_TYPE_LEVEL_HIGH>,
<65 IRQ_TYPE_LEVEL_HIGH>,
<69 IRQ_TYPE_LEVEL_HIGH>,
<73 IRQ_TYPE_LEVEL_HIGH>,
<127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
};
};
CP11X_LABEL(comphy): phy@120000 {
compatible = "marvell,comphy-cp110";
reg = <0x120000 0x6000>;
marvell,system-controller = <&CP11X_LABEL(syscon0)>;
clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
<&CP11X_LABEL(clk) 1 18>;
clock-names = "mg_clk", "mg_core_clk", "axi_clk";
#address-cells = <1>;
#size-cells = <0>;
CP11X_LABEL(comphy0): phy@0 {
reg = <0>;
#phy-cells = <1>;
};
CP11X_LABEL(comphy1): phy@1 {
reg = <1>;
#phy-cells = <1>;
};
CP11X_LABEL(comphy2): phy@2 {
reg = <2>;
#phy-cells = <1>;
};
CP11X_LABEL(comphy3): phy@3 {
reg = <3>;
#phy-cells = <1>;
};
CP11X_LABEL(comphy4): phy@4 {
reg = <4>;
#phy-cells = <1>;
};
CP11X_LABEL(comphy5): phy@5 {
reg = <5>;
#phy-cells = <1>;
};
};
CP11X_LABEL(mdio): mdio@12a200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
<&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
status = "disabled";
};
CP11X_LABEL(xmdio): mdio@12a600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,xmdio";
reg = <0x12a600 0x10>;
clocks = <&CP11X_LABEL(clk) 1 5>,
<&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
status = "disabled";
};
CP11X_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
#address-cells = <1>;
#size-cells = <1>;
CP11X_LABEL(icu_nsr): interrupt-controller@10 {
compatible = "marvell,cp110-icu-nsr";
reg = <0x10 0x20>;
#interrupt-cells = <2>;
interrupt-controller;
msi-parent = <&gicp>;
};
CP11X_LABEL(icu_sei): interrupt-controller@50 {
compatible = "marvell,cp110-icu-sei";
reg = <0x50 0x10>;
#interrupt-cells = <2>;
interrupt-controller;
msi-parent = <&sei>;
};
};
CP11X_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP11X_LABEL(syscon0): system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x2000>;
CP11X_LABEL(clk): clock {
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
};
CP11X_LABEL(gpio1): gpio@100 {
compatible = "marvell,armada-8k-gpio";
offset = <0x100>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
<85 IRQ_TYPE_LEVEL_HIGH>,
<84 IRQ_TYPE_LEVEL_HIGH>,
<83 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
status = "disabled";
};
CP11X_LABEL(gpio2): gpio@140 {
compatible = "marvell,armada-8k-gpio";
offset = <0x140>;
ngpios = <31>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
<81 IRQ_TYPE_LEVEL_HIGH>,
<80 IRQ_TYPE_LEVEL_HIGH>,
<79 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
status = "disabled";
};
};
CP11X_LABEL(syscon1): system-controller@400000 {
compatible = "syscon", "simple-mfd";
reg = <0x400000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
CP11X_LABEL(thermal): thermal-sensor@70 {
compatible = "marvell,armada-cp110-thermal";
reg = <0x70 0x10>;
interrupts-extended =
<&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <1>;
};
};
CP11X_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 22>,
<&CP11X_LABEL(clk) 1 16>;
status = "disabled";
};
CP11X_LABEL(usb3_1): usb3@510000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 23>,
<&CP11X_LABEL(clk) 1 16>;
status = "disabled";
};
CP11X_LABEL(sata0): sata@540000 {
compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP11X_LABEL(clk) 1 15>,
<&CP11X_LABEL(clk) 1 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata-port@0 {
reg = <0>;
};
sata-port@1 {
reg = <1>;
};
};
CP11X_LABEL(xor0): xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 8>,
<&CP11X_LABEL(clk) 1 14>;
};
CP11X_LABEL(xor1): xor@6c0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
dma-coherent;
msi-parent = <&gic_v2m0>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 7>,
<&CP11X_LABEL(clk) 1 14>;
};
CP11X_LABEL(spi0): spi@700600 {
compatible = "marvell,armada-380-spi";
reg = <0x700600 0x50>;
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-names = "core", "axi";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(spi1): spi@700680 {
compatible = "marvell,armada-380-spi";
reg = <0x700680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "core", "axi";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(i2c0): i2c@701000 {
compatible = "marvell,mv78230-i2c";
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(i2c1): i2c@701100 {
compatible = "marvell,mv78230-i2c";
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(uart0): serial@702000 {
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(uart1): serial@702100 {
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(uart2): serial@702200 {
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(uart3): serial@702300 {
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP11X_LABEL(clk) 1 21>,
<&CP11X_LABEL(clk) 1 17>;
status = "disabled";
};
CP11X_LABEL(nand_controller): nand@720000 {
/*
* Due to the limitation of the pins available
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
compatible = "marvell,armada-8k-nand-controller",
"marvell,armada370-nand-controller";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 2>,
<&CP11X_LABEL(clk) 1 17>;
marvell,system-controller = <&CP11X_LABEL(syscon0)>;
status = "disabled";
};
CP11X_LABEL(trng): trng@760000 {
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 25>,
<&CP11X_LABEL(clk) 1 17>;
status = "okay";
};
CP11X_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
dma-coherent;
status = "disabled";
};
CP11X_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197b";
reg = <0x800000 0x200000>;
interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
<88 IRQ_TYPE_LEVEL_HIGH>,
<89 IRQ_TYPE_LEVEL_HIGH>,
<90 IRQ_TYPE_LEVEL_HIGH>,
<91 IRQ_TYPE_LEVEL_HIGH>,
<92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 26>,
<&CP11X_LABEL(clk) 1 17>;
dma-coherent;
};
};
CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
<0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
status = "disabled";
};
CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
<0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
status = "disabled";
};
CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
<0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
reg-names = "ctrl", "config";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
dma-coherent;
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
ranges =
/* downstream I/O */
<0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000
/* non-prefetchable memory */
0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
status = "disabled";
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7