arm64: dts: marvell: Prepare the introduction of CP115

CP110 and CP115 are almost the same in terms of features and have a
very limited set of differences. Let's create an armada-cp11x.dtsi
file which will be used to instantiate both CP110 and CP115
nodes.

The only changes between the two armada-cp11{0,x}.dtsi files are the
following naming in macros: s/CP110/CP11X/.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-70x0.dtsi

@@ -17,23 +17,23 @@ aliases {
 /*
  * Instantiate the CP110
  */
-#define CP110_NAME		cp0
-#define CP110_BASE		f2000000
-#define CP110_PCIE_IO_BASE	0xf9000000
-#define CP110_PCIE_MEM_BASE	0xf6000000
-#define CP110_PCIE0_BASE	f2600000
-#define CP110_PCIE1_BASE	f2620000
-#define CP110_PCIE2_BASE	f2640000
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIE_IO_BASE	0xf9000000
+#define CP11X_PCIE_MEM_BASE	0xf6000000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 &cp0_gpio1 {
 	status = "okay";

arch/arm64/boot/dts/marvell/armada-80x0.dtsi

@@ -19,44 +19,44 @@ aliases {
 /*
  * Instantiate the master CP110
  */
-#define CP110_NAME		cp0
-#define CP110_BASE		f2000000
-#define CP110_PCIE_IO_BASE	0xf9000000
-#define CP110_PCIE_MEM_BASE	0xf6000000
-#define CP110_PCIE0_BASE	f2600000
-#define CP110_PCIE1_BASE	f2620000
-#define CP110_PCIE2_BASE	f2640000
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIE_IO_BASE	0xf9000000
+#define CP11X_PCIE_MEM_BASE	0xf6000000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 /*
  * Instantiate the slave CP110
  */
-#define CP110_NAME		cp1
-#define CP110_BASE		f4000000
-#define CP110_PCIE_IO_BASE	0xfd000000
-#define CP110_PCIE_MEM_BASE	0xfa000000
-#define CP110_PCIE0_BASE	f4600000
-#define CP110_PCIE1_BASE	f4620000
-#define CP110_PCIE2_BASE	f4640000
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIE_IO_BASE	0xfd000000
+#define CP11X_PCIE_MEM_BASE	0xfa000000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIE_IO_BASE
+#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 /* The 80x0 has two CP blocks, but uses only one block from each. */
 &cp1_gpio1 {

arch/arm64/boot/dts/marvell/armada-common.dtsi

@@ -6,6 +6,6 @@
 /* Common definitions used by Armada 7K/8K DTs */
 #define PASTER(x, y) x ## y
 #define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
-#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
 #define ADDRESSIFY(addr) EVALUATOR(0x, addr)