Commit 4812dcc4 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: x86: Remove v1 ops and structs

The v1 code refers to Medfield/Clovertrail.  It's not used at all in
the current driver, and probably won't be ever.  Let's clean this up,
then we can go to the next stage of cleanup tasks.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 71673303
......@@ -280,23 +280,12 @@ static int had_read_modify_aud_config_v2(struct snd_pcm_substream *substream,
return had_read_modify(AUD_CONFIG, data, mask);
}
static void snd_intelhad_enable_audio_v1(struct snd_pcm_substream *substream,
u8 enable)
{
had_read_modify(AUD_CONFIG, enable, BIT(0));
}
static void snd_intelhad_enable_audio_v2(struct snd_pcm_substream *substream,
u8 enable)
{
had_read_modify_aud_config_v2(substream, enable, BIT(0));
}
static void snd_intelhad_reset_audio_v1(u8 reset)
{
had_write_register(AUD_HDMI_STATUS, reset);
}
static void snd_intelhad_reset_audio_v2(u8 reset)
{
had_write_register(AUD_HDMI_STATUS_v2, reset);
......@@ -320,7 +309,7 @@ static int had_prog_status_reg(struct snd_pcm_substream *substream,
IEC958_AES0_NONAUDIO)>>1;
ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits &
IEC958_AES3_CON_CLOCK)>>4;
cfg_val.cfg_regx.val_bit = ch_stat0.status_0_regx.lpcm_id;
cfg_val.cfg_regx_v2.val_bit = ch_stat0.status_0_regx.lpcm_id;
switch (substream->runtime->rate) {
case AUD_SAMPLE_RATE_32:
......@@ -401,58 +390,6 @@ static int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream,
return 0;
}
/**
* function to initialize audio
* registers and buffer confgiuration registers
* This function is called in the prepare callback
*/
static int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream,
struct snd_intelhad *intelhaddata)
{
union aud_cfg cfg_val = {.cfg_regval = 0};
union aud_buf_config buf_cfg = {.buf_cfgval = 0};
u8 channels;
had_prog_status_reg(substream, intelhaddata);
buf_cfg.buf_cfg_regx.fifo_width = FIFO_THRESHOLD;
buf_cfg.buf_cfg_regx.aud_delay = 0;
had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval);
channels = substream->runtime->channels;
switch (channels) {
case 1:
case 2:
cfg_val.cfg_regx.num_ch = CH_STEREO;
cfg_val.cfg_regx.layout = LAYOUT0;
break;
case 3:
case 4:
cfg_val.cfg_regx.num_ch = CH_THREE_FOUR;
cfg_val.cfg_regx.layout = LAYOUT1;
break;
case 5:
case 6:
cfg_val.cfg_regx.num_ch = CH_FIVE_SIX;
cfg_val.cfg_regx.layout = LAYOUT1;
break;
case 7:
case 8:
cfg_val.cfg_regx.num_ch = CH_SEVEN_EIGHT;
cfg_val.cfg_regx.layout = LAYOUT1;
break;
}
cfg_val.cfg_regx.val_bit = 1;
had_write_register(AUD_CONFIG, cfg_val.cfg_regval);
return 0;
}
/*
* Compute derived values in channel_allocations[].
*/
......@@ -659,56 +596,6 @@ static int had_register_chmap_ctls(struct snd_intelhad *intelhaddata,
return 0;
}
/**
* snd_intelhad_prog_dip_v1 - to initialize Data Island Packets registers
*
* @substream:substream for which the prepare function is called
* @intelhaddata:substream private data
*
* This function is called in the prepare callback
*/
static void snd_intelhad_prog_dip_v1(struct snd_pcm_substream *substream,
struct snd_intelhad *intelhaddata)
{
int i;
union aud_ctrl_st ctrl_state = {.ctrl_val = 0};
union aud_info_frame2 frame2 = {.fr2_val = 0};
union aud_info_frame3 frame3 = {.fr3_val = 0};
u8 checksum = 0;
int channels;
channels = substream->runtime->channels;
had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1;
frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation(
intelhaddata, channels);
/*Calculte the byte wide checksum for all valid DIP words*/
for (i = 0; i < BYTES_PER_WORD; i++)
checksum += (HDMI_INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0;
for (i = 0; i < BYTES_PER_WORD; i++)
checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
for (i = 0; i < BYTES_PER_WORD; i++)
checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0;
frame2.fr2_regx.chksum = -(checksum);
had_write_register(AUD_HDMIW_INFOFR, HDMI_INFO_FRAME_WORD1);
had_write_register(AUD_HDMIW_INFOFR, frame2.fr2_val);
had_write_register(AUD_HDMIW_INFOFR, frame3.fr3_val);
/* program remaining DIP words with zero */
for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++)
had_write_register(AUD_HDMIW_INFOFR, 0x0);
ctrl_state.ctrl_regx.dip_freq = 1;
ctrl_state.ctrl_regx.dip_en_sta = 1;
had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val);
}
/**
* snd_intelhad_prog_dip_v2 - to initialize Data Island Packets registers
*
......@@ -928,32 +815,6 @@ static int had_calculate_maud_value(u32 aud_samp_freq, u32 link_rate)
return maud_val;
}
/**
* snd_intelhad_prog_cts_v1 - Program HDMI audio CTS value
*
* @aud_samp_freq: sampling frequency of audio data
* @tmds: sampling frequency of the display data
* @n_param: N value, depends on aud_samp_freq
* @intelhaddata:substream private data
*
* Program CTS register based on the audio and display sampling frequency
*/
static void snd_intelhad_prog_cts_v1(u32 aud_samp_freq, u32 tmds,
u32 link_rate, u32 n_param,
struct snd_intelhad *intelhaddata)
{
u32 cts_val;
u64 dividend, divisor;
/* Calculate CTS according to HDMI 1.3a spec*/
dividend = (u64)tmds * n_param*1000;
divisor = 128 * aud_samp_freq;
cts_val = div64_u64(dividend, divisor);
pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n",
tmds, n_param, cts_val);
had_write_register(AUD_HDMI_CTS, (BIT(20) | cts_val));
}
/**
* snd_intelhad_prog_cts_v2 - Program HDMI audio CTS value
*
......@@ -1026,31 +887,6 @@ static int had_calculate_n_value(u32 aud_samp_freq)
return n_val;
}
/**
* snd_intelhad_prog_n_v1 - Program HDMI audio N value
*
* @aud_samp_freq: sampling frequency of audio data
* @n_param: N value, depends on aud_samp_freq
* @intelhaddata:substream private data
*
* This function is called in the prepare callback.
* It programs based on the audio and display sampling frequency
*/
static int snd_intelhad_prog_n_v1(u32 aud_samp_freq, u32 *n_param,
struct snd_intelhad *intelhaddata)
{
s32 n_val;
n_val = had_calculate_n_value(aud_samp_freq);
if (n_val < 0)
return n_val;
had_write_register(AUD_N_ENABLE, (BIT(20) | n_val));
*n_param = n_val;
return 0;
}
/**
* snd_intelhad_prog_n_v2 - Program HDMI audio N value
*
......@@ -1087,35 +923,6 @@ static int snd_intelhad_prog_n_v2(u32 aud_samp_freq, u32 *n_param,
return 0;
}
static void had_clear_underrun_intr_v1(struct snd_intelhad *intelhaddata)
{
u32 hdmi_status, i = 0;
/* Handle Underrun interrupt within Audio Unit */
had_write_register(AUD_CONFIG, 0);
/* Reset buffer pointers */
had_write_register(AUD_HDMI_STATUS, 1);
had_write_register(AUD_HDMI_STATUS, 0);
/**
* The interrupt status 'sticky' bits might not be cleared by
* setting '1' to that bit once...
*/
do { /* clear bit30, 31 AUD_HDMI_STATUS */
had_read_register(AUD_HDMI_STATUS, &hdmi_status);
pr_debug("HDMI status =0x%x\n", hdmi_status);
if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) {
i++;
hdmi_status &= (AUD_CONFIG_MASK_SRDBG |
AUD_CONFIG_MASK_FUNCRST);
hdmi_status |= ~AUD_CONFIG_MASK_UNDERRUN;
had_write_register(AUD_HDMI_STATUS, hdmi_status);
} else
break;
} while (i < MAX_CNT);
if (i >= MAX_CNT)
pr_err("Unable to clear UNDERRUN bits\n");
}
static void had_clear_underrun_intr_v2(struct snd_intelhad *intelhaddata)
{
u32 hdmi_status, i = 0;
......@@ -1775,16 +1582,6 @@ static struct snd_intel_had_interface had_interface = {
.resume = hdmi_audio_resume,
};
static struct had_ops had_ops_v1 = {
.enable_audio = snd_intelhad_enable_audio_v1,
.reset_audio = snd_intelhad_reset_audio_v1,
.prog_n = snd_intelhad_prog_n_v1,
.prog_cts = snd_intelhad_prog_cts_v1,
.audio_ctrl = snd_intelhad_prog_audio_ctrl_v1,
.prog_dip = snd_intelhad_prog_dip_v1,
.handle_underrun = had_clear_underrun_intr_v1,
};
static struct had_ops had_ops_v2 = {
.enable_audio = snd_intelhad_enable_audio_v2,
.reset_audio = snd_intelhad_reset_audio_v2,
......@@ -1934,7 +1731,6 @@ int hdmi_audio_probe(void *deviceptr)
}
intelhaddata->hw_silence = 1;
had_ops_v1 = had_ops_v1; /* unused */
intelhaddata->ops = &had_ops_v2;
return retval;
......
......@@ -358,19 +358,6 @@ struct channel_map_table {
*
*/
union aud_cfg {
struct {
u32 aud_en:1;
u32 layout:1;
u32 fmt:2;
u32 num_ch:2;
u32 rsvd0:1;
u32 set:1;
u32 flat:1;
u32 val_bit:1;
u32 user_bit:1;
u32 underrun:1;
u32 rsvd1:20;
} cfg_regx;
struct {
u32 aud_en:1;
u32 layout:1;
......@@ -438,11 +425,6 @@ union aud_ch_status_1 {
*
*/
union aud_hdmi_cts {
struct {
u32 cts_val:20;
u32 en_cts_prog:1;
u32 rsvd:11;
} cts_regx;
struct {
u32 cts_val:24;
u32 en_cts_prog:1;
......@@ -459,11 +441,6 @@ union aud_hdmi_cts {
*
*/
union aud_hdmi_n_enable {
struct {
u32 n_val:20;
u32 en_n_prog:1;
u32 rsvd:11;
} n_regx;
struct {
u32 n_val:24;
u32 en_n_prog:1;
......@@ -480,12 +457,6 @@ union aud_hdmi_n_enable {
*
*/
union aud_buf_config {
struct {
u32 fifo_width:8;
u32 rsvd0:8;
u32 aud_delay:8;
u32 rsvd1:8;
} buf_cfg_regx;
struct {
u32 audio_fifo_watermark:8;
u32 dma_fifo_watermark:3;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment