Commit 481c7f86 authored by Tony Lindgren's avatar Tony Lindgren Committed by Lee Jones

mfd: twl4030-power: Fix poweroff with PM configuration enabled

Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset
configuration") enabled configuring the PM features for twl4030.

This caused poweroff command to fail on devices that have the
BCI charger on twl4030 wired, or have power wired for VBUS.
Instead of powering off, the device reboots. This is because
voltage is detected on charger or VBUS with the default bits
enabled for the power transition registers.

To fix the issue, let's just clear VBUS and CHG bits as we want
poweroff command to keep the system powered off.

Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent c0acb814
......@@ -44,6 +44,15 @@ static u8 twl4030_start_script_address = 0x2b;
#define PWR_DEVSLP BIT(1)
#define PWR_DEVOFF BIT(0)
/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */
#define STARTON_SWBUG BIT(7) /* Start on watchdog */
#define STARTON_VBUS BIT(5) /* Start on VBUS */
#define STARTON_VBAT BIT(4) /* Start on battery insert */
#define STARTON_RTC BIT(3) /* Start on RTC */
#define STARTON_USB BIT(2) /* Start on USB host */
#define STARTON_CHG BIT(1) /* Start on charger */
#define STARTON_PWON BIT(0) /* Start on PWRON button */
#define SEQ_OFFSYNC (1 << 0)
#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
......@@ -606,6 +615,44 @@ twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
return 0;
}
static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues)
{
u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION,
TWL4030_PM_MASTER_CFG_P2_TRANSITION,
TWL4030_PM_MASTER_CFG_P3_TRANSITION, };
u8 val;
int i, err;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
TWL4030_PM_MASTER_PROTECT_KEY);
if (err)
goto relock;
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
TWL4030_PM_MASTER_KEY_CFG2,
TWL4030_PM_MASTER_PROTECT_KEY);
if (err)
goto relock;
for (i = 0; i < sizeof(regs); i++) {
err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER,
&val, regs[i]);
if (err)
break;
val = (~bitmask & val) | (bitmask & bitvalues);
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
val, regs[i]);
if (err)
break;
}
if (err)
pr_err("TWL4030 Register access failed: %i\n", err);
relock:
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
TWL4030_PM_MASTER_PROTECT_KEY);
}
/*
* In master mode, start the power off sequence.
* After a successful execution, TWL shuts down the power to the SoC
......@@ -615,6 +662,11 @@ void twl4030_power_off(void)
{
int err;
/* Disable start on charger or VBUS as it can break poweroff */
err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0);
if (err)
pr_err("TWL4030 Unable to configure start-up\n");
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF,
TWL4030_PM_MASTER_P1_SW_EVENTS);
if (err)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment