Commit 4831e0d9 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman

serial: 8250_mid: handle interrupt correctly in DMA case

Starting from Tangier B0 and continuing on Anniedale the HSU DMA interrupt
line is actually shared with UART. Handling them independently is racy and
quite often comes with the following traceback.

 irq 54: nobody cared (try booting with the "irqpoll" option)
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6-edison64-86244934+ #1
 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
  ffff88003f203eb0 ffffffff8130e718 ffff880032627000 ffff88003262709c
  ffff88003f203ed8 ffffffff810a3960 ffff880032627000 0000000000000000
  ffff880032627000 ffff88003f203f10 ffffffff810a3cc7 ffff880032627000
 Call Trace:
  <IRQ>
  [<ffffffff8130e718>] dump_stack+0x4d/0x65
  [<ffffffff810a3960>] __report_bad_irq+0x30/0xc0
  [<ffffffff810a3cc7>] note_interrupt+0x227/0x270
  [<ffffffff810a1380>] handle_irq_event_percpu+0x40/0x50
  [<ffffffff810a13b7>] handle_irq_event+0x27/0x50
  [<ffffffff810a42d5>] handle_fasteoi_irq+0x85/0x150
  [<ffffffff8101d7fe>] handle_irq+0x6e/0x120
  [<ffffffff8105b8bc>] ? _local_bh_enable+0x1c/0x50
  [<ffffffff8101d0d6>] do_IRQ+0x46/0xd0
  [<ffffffff818cef3f>] common_interrupt+0x7f/0x7f
  <EOI>
  [<ffffffff818cdead>] ? mwait_idle+0x7d/0x140
  [<ffffffff81024c9a>] arch_cpu_idle+0xa/0x10
  [<ffffffff818ce150>] default_idle_call+0x20/0x30
  [<ffffffff810908fd>] cpu_startup_entry+0x16d/0x1d0
  [<ffffffff818c882d>] rest_init+0x6d/0x70
  [<ffffffff81f93e8f>] start_kernel+0x3e2/0x3ef
  [<ffffffff81f9343d>] x86_64_start_reservations+0x38/0x3a
  [<ffffffff81f93529>] x86_64_start_kernel+0xea/0xed
 handlers:
 [<ffffffff81411670>] serial8250_interrupt
 Disabling IRQ #54

Fix this by handling interrupt only in one place.

The issue is discussed here: https://github.com/andy-shev/linux/issues/5

Moreover this also fixes another bug when Rx DMA returns wrong residue and we
can't rely on it.
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarVinod Koul <vinod.koul@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6a171b29
...@@ -23,15 +23,28 @@ ...@@ -23,15 +23,28 @@
#define HSU_PCI_CHAN_OFFSET 0x100 #define HSU_PCI_CHAN_OFFSET 0x100
#define PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA 0x081e
#define PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA 0x1192
static irqreturn_t hsu_pci_irq(int irq, void *dev) static irqreturn_t hsu_pci_irq(int irq, void *dev)
{ {
struct hsu_dma_chip *chip = dev; struct hsu_dma_chip *chip = dev;
struct pci_dev *pdev = to_pci_dev(chip->dev);
u32 dmaisr; u32 dmaisr;
u32 status; u32 status;
unsigned short i; unsigned short i;
int ret = 0; int ret = 0;
int err; int err;
/*
* On Intel Tangier B0 and Anniedale the interrupt line, disregarding
* to have different numbers, is shared between HSU DMA and UART IPs.
* Thus on such SoCs we are expecting that IRQ handler is called in
* UART driver only.
*/
if (pdev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA)
return IRQ_HANDLED;
dmaisr = readl(chip->regs + HSU_PCI_DMAISR); dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
for (i = 0; i < chip->hsu->nr_channels; i++) { for (i = 0; i < chip->hsu->nr_channels; i++) {
if (dmaisr & 0x1) { if (dmaisr & 0x1) {
...@@ -113,8 +126,8 @@ static void hsu_pci_remove(struct pci_dev *pdev) ...@@ -113,8 +126,8 @@ static void hsu_pci_remove(struct pci_dev *pdev)
} }
static const struct pci_device_id hsu_pci_id_table[] = { static const struct pci_device_id hsu_pci_id_table[] = {
{ PCI_VDEVICE(INTEL, 0x081e), 0 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA), 0 },
{ PCI_VDEVICE(INTEL, 0x1192), 0 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA), 0 },
{ } { }
}; };
MODULE_DEVICE_TABLE(pci, hsu_pci_id_table); MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
......
...@@ -75,6 +75,37 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p) ...@@ -75,6 +75,37 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
return 0; return 0;
} }
static int tng_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
struct uart_8250_port *up = up_to_u8250p(p);
struct hsu_dma_chip *chip;
u32 status;
int ret = 0;
int err;
chip = pci_get_drvdata(mid->dma_dev);
/* Rx DMA */
err = hsu_dma_get_status(chip, mid->dma_index * 2 + 1, &status);
if (err > 0) {
serial8250_rx_dma_flush(up);
ret |= 1;
} else if (err == 0)
ret |= hsu_dma_do_irq(chip, mid->dma_index * 2 + 1, status);
/* Tx DMA */
err = hsu_dma_get_status(chip, mid->dma_index * 2, &status);
if (err > 0)
ret |= 1;
else if (err == 0)
ret |= hsu_dma_do_irq(chip, mid->dma_index * 2, status);
/* UART */
ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
return IRQ_RETVAL(ret);
}
static int tng_setup(struct mid8250 *mid, struct uart_port *p) static int tng_setup(struct mid8250 *mid, struct uart_port *p)
{ {
struct pci_dev *pdev = to_pci_dev(p->dev); struct pci_dev *pdev = to_pci_dev(p->dev);
...@@ -90,6 +121,8 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p) ...@@ -90,6 +121,8 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
mid->dma_index = index; mid->dma_index = index;
mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
p->handle_irq = tng_handle_irq;
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment