Commit 4858704d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  therm_windtunnel: Convert to a new-style i2c driver
  therm_adt746x: Convert to a new-style i2c driver
  windfarm: Convert to new-style i2c drivers
  therm_pm72: Convert to a new-style i2c driver
  i2c-viapro: Add new PCI device ID for VX855
  i2c/chips: Move max6875 to drivers/misc/eeprom
  i2c: Do not give adapters a default parent
  i2c: Do not probe for TV chips on Voodoo3 adapters
  i2c: Retry automatically on arbitration loss
  i2c: Remove void casts
parents 86ade88e 036533e2
......@@ -19,6 +19,9 @@ Supported adapters:
* VIA Technologies, Inc. VX800/VX820
Datasheet: available on http://linux.via.com.tw
* VIA Technologies, Inc. VX855/VX875
Datasheet: Availability unknown
Authors:
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
......@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
device 1106:3287 (VT8251)
device 1106:8324 (CX700)
device 1106:8353 (VX800/VX820)
device 1106:8409 (VX855/VX875)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
......
......@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_EEPROM_MAX6875=y
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
......
......@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_EEPROM_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
......
......@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
CONFIG_EEPROM_MAX6875=m
CONFIG_SENSORS_TSL2550=m
CONFIG_MCU_MPC8349EMITX=m
# CONFIG_I2C_DEBUG_CORE is not set
......
......@@ -211,7 +211,7 @@ config I2C_VIA
will be called i2c-via.
config I2C_VIAPRO
tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx"
depends on PCI
help
If you say yes to this option, support will be included for the VIA
......@@ -225,8 +225,8 @@ config I2C_VIAPRO
VT8237R/A/S
VT8251
CX700
VX800
VX820
VX800/VX820
VX855/VX875
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
......
......@@ -37,6 +37,7 @@
VT8251 0x3287 yes
CX700 0x8324 yes
VX800/VX820 0x8353 yes
VX855/VX875 0x8409 yes
Note: we assume there can only be one device, with one SMBus interface.
*/
......@@ -404,6 +405,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
switch (pdev->device) {
case PCI_DEVICE_ID_VIA_CX700:
case PCI_DEVICE_ID_VIA_VX800:
case PCI_DEVICE_ID_VIA_VX855:
case PCI_DEVICE_ID_VIA_8251:
case PCI_DEVICE_ID_VIA_8237:
case PCI_DEVICE_ID_VIA_8237A:
......@@ -469,6 +471,8 @@ static struct pci_device_id vt596_ids[] = {
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
.driver_data = SMBBA3 },
{ 0, }
};
......
......@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
static struct i2c_adapter voodoo3_i2c_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_TV_ANALOG,
.name = "I2C Voodoo3/Banshee adapter",
.algo_data = &voo_i2c_bit_data,
};
......
......@@ -64,21 +64,6 @@ config SENSORS_PCA9539
This driver is deprecated and will be dropped soon. Use
drivers/gpio/pca953x.c instead.
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
help
If you say yes here you get support for the Maxim MAX6875
EEPROM-programmable, quad power-supply sequencer/supervisor.
This provides an interface to program the EEPROM and reset the chip.
This driver also supports the Maxim MAX6874 hex power-supply
sequencer/supervisor if found at a compatible address.
This driver can also be built as a module. If so, the module
will be called max6875.
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
......
......@@ -11,7 +11,6 @@
#
obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
......
......@@ -29,7 +29,6 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
......@@ -451,16 +450,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
mutex_lock(&core_lock);
/* Add the adapter to the driver core.
* If the parent pointer is not set up,
* we add this adapter to the host bus.
*/
if (adap->dev.parent == NULL) {
adap->dev.parent = &platform_bus;
pr_debug("I2C adapter driver [%s] forgot to specify "
"physical device\n", adap->name);
}
/* Set default timeout to 1 second if not already set */
if (adap->timeout == 0)
adap->timeout = HZ;
......@@ -1022,7 +1011,8 @@ module_exit(i2c_exit);
*/
int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
int ret;
unsigned long orig_jiffies;
int ret, try;
/* REVISIT the fault reporting model here is weak:
*
......@@ -1060,7 +1050,15 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
mutex_lock_nested(&adap->bus_lock, adap->level);
}
ret = adap->algo->master_xfer(adap,msgs,num);
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
for (ret = 0, try = 0; try <= adap->retries; try++) {
ret = adap->algo->master_xfer(adap, msgs, num);
if (ret != -EAGAIN)
break;
if (time_after(jiffies, orig_jiffies + adap->timeout))
break;
}
mutex_unlock(&adap->bus_lock);
return ret;
......@@ -1509,7 +1507,7 @@ struct i2c_adapter* i2c_get_adapter(int id)
struct i2c_adapter *adapter;
mutex_lock(&core_lock);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
adapter = idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
adapter = NULL;
......@@ -1995,14 +1993,27 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
char read_write, u8 command, int protocol,
union i2c_smbus_data *data)
{
unsigned long orig_jiffies;
int try;
s32 res;
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
if (adapter->algo->smbus_xfer) {
mutex_lock(&adapter->bus_lock);
res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
command, protocol, data);
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
for (res = 0, try = 0; try <= adapter->retries; try++) {
res = adapter->algo->smbus_xfer(adapter, addr, flags,
read_write, command,
protocol, data);
if (res != -EAGAIN)
break;
if (time_after(jiffies,
orig_jiffies + adapter->timeout))
break;
}
mutex_unlock(&adapter->bus_lock);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
......
......@@ -72,7 +72,7 @@ MODULE_PARM_DESC(verbose,"Verbose log operations "
"(default 0)");
struct thermostat {
struct i2c_client clt;
struct i2c_client *clt;
u8 temps[3];
u8 cached_temp[3];
u8 initial_limits[3];
......@@ -87,9 +87,6 @@ static struct of_device * of_dev;
static struct thermostat* thermostat;
static struct task_struct *thread_therm = NULL;
static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
int busno);
static void write_both_fan_speed(struct thermostat *th, int speed);
static void write_fan_speed(struct thermostat *th, int speed, int fan);
......@@ -101,7 +98,7 @@ write_reg(struct thermostat* th, int reg, u8 data)
tmp[0] = reg;
tmp[1] = data;
rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
rc = i2c_master_send(th->clt, (const char *)tmp, 2);
if (rc < 0)
return rc;
if (rc != 2)
......@@ -116,12 +113,12 @@ read_reg(struct thermostat* th, int reg)
int rc;
reg_addr = (u8)reg;
rc = i2c_master_send(&th->clt, &reg_addr, 1);
rc = i2c_master_send(th->clt, &reg_addr, 1);
if (rc < 0)
return rc;
if (rc != 1)
return -ENODEV;
rc = i2c_master_recv(&th->clt, (char *)&data, 1);
rc = i2c_master_recv(th->clt, (char *)&data, 1);
if (rc < 0)
return rc;
return data;
......@@ -131,26 +128,36 @@ static int
attach_thermostat(struct i2c_adapter *adapter)
{
unsigned long bus_no;
struct i2c_board_info info;
struct i2c_client *client;
if (strncmp(adapter->name, "uni-n", 5))
return -ENODEV;
bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
if (bus_no != therm_bus)
return -ENODEV;
return attach_one_thermostat(adapter, therm_address, bus_no);
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
info.addr = therm_address;
client = i2c_new_device(adapter, &info);
if (!client)
return -ENODEV;
/*
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
list_add_tail(&client->detected, &client->driver->clients);
return 0;
}
static int
detach_thermostat(struct i2c_adapter *adapter)
remove_thermostat(struct i2c_client *client)
{
struct thermostat* th;
struct thermostat *th = i2c_get_clientdata(client);
int i;
if (thermostat == NULL)
return 0;
th = thermostat;
if (thread_therm != NULL) {
kthread_stop(thread_therm);
}
......@@ -166,8 +173,6 @@ detach_thermostat(struct i2c_adapter *adapter)
write_both_fan_speed(th, -1);
i2c_detach_client(&th->clt);
thermostat = NULL;
kfree(th);
......@@ -175,14 +180,6 @@ detach_thermostat(struct i2c_adapter *adapter)
return 0;
}
static struct i2c_driver thermostat_driver = {
.driver = {
.name = "therm_adt746x",
},
.attach_adapter = attach_thermostat,
.detach_adapter = detach_thermostat,
};
static int read_fan_speed(struct thermostat *th, u8 addr)
{
u8 tmp[2];
......@@ -371,8 +368,8 @@ static void set_limit(struct thermostat *th, int i)
th->limits[i] = default_limits_local[i] + limit_adjust;
}
static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
int busno)
static int probe_thermostat(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct thermostat* th;
int rc;
......@@ -385,16 +382,12 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
if (!th)
return -ENOMEM;
th->clt.addr = addr;
th->clt.adapter = adapter;
th->clt.driver = &thermostat_driver;
strcpy(th->clt.name, "thermostat");
i2c_set_clientdata(client, th);
th->clt = client;
rc = read_reg(th, 0);
if (rc < 0) {
printk(KERN_ERR "adt746x: Thermostat failed to read config "
"from bus %d !\n",
busno);
dev_err(&client->dev, "Thermostat failed to read config!\n");
kfree(th);
return -ENODEV;
}
......@@ -423,14 +416,6 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
thermostat = th;
if (i2c_attach_client(&th->clt)) {
printk(KERN_INFO "adt746x: Thermostat failed to attach "
"client !\n");
thermostat = NULL;
kfree(th);
return -ENODEV;
}
/* be sure to really write fan speed the first time */
th->last_speed[0] = -2;
th->last_speed[1] = -2;
......@@ -456,6 +441,21 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
return 0;
}
static const struct i2c_device_id therm_adt746x_id[] = {
{ "therm_adt746x", 0 },
{ }
};
static struct i2c_driver thermostat_driver = {
.driver = {
.name = "therm_adt746x",
},
.attach_adapter = attach_thermostat,
.probe = probe_thermostat,
.remove = remove_thermostat,
.id_table = therm_adt746x_id,
};
/*
* Now, unfortunately, sysfs doesn't give us a nice void * we could
* pass around to the attribute functions, so we don't really have
......
......@@ -286,22 +286,6 @@ struct fcu_fan_table fcu_fans[] = {
},
};
/*
* i2c_driver structure to attach to the host i2c controller
*/
static int therm_pm72_attach(struct i2c_adapter *adapter);
static int therm_pm72_detach(struct i2c_adapter *adapter);
static struct i2c_driver therm_pm72_driver =
{
.driver = {
.name = "therm_pm72",
},
.attach_adapter = therm_pm72_attach,
.detach_adapter = therm_pm72_detach,
};
/*
* Utility function to create an i2c_client structure and
* attach it to one of u3 adapters
......@@ -310,6 +294,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
{
struct i2c_client *clt;
struct i2c_adapter *adap;
struct i2c_board_info info;
if (id & 0x200)
adap = k2;
......@@ -320,31 +305,21 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
if (adap == NULL)
return NULL;
clt = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (clt == NULL)
return NULL;
clt->addr = (id >> 1) & 0x7f;
clt->adapter = adap;
clt->driver = &therm_pm72_driver;
strncpy(clt->name, name, I2C_NAME_SIZE-1);
if (i2c_attach_client(clt)) {
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = (id >> 1) & 0x7f;
strlcpy(info.type, "therm_pm72", I2C_NAME_SIZE);
clt = i2c_new_device(adap, &info);
if (!clt) {
printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id);
kfree(clt);
return NULL;
}
return clt;
}
/*
* Utility function to get rid of the i2c_client structure
* (will also detach from the adapter hopepfully)
*/
static void detach_i2c_chip(struct i2c_client *clt)
{
i2c_detach_client(clt);
kfree(clt);
/*
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
list_add_tail(&clt->detected, &clt->driver->clients);
return clt;
}
/*
......@@ -1203,8 +1178,6 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
return 0;
fail:
if (state->monitor)
detach_i2c_chip(state->monitor);
state->monitor = NULL;
return -ENODEV;
......@@ -1232,7 +1205,6 @@ static void dispose_cpu_state(struct cpu_pid_state *state)
device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
}
detach_i2c_chip(state->monitor);
state->monitor = NULL;
}
......@@ -1407,7 +1379,6 @@ static void dispose_backside_state(struct backside_pid_state *state)
device_remove_file(&of_dev->dev, &dev_attr_backside_temperature);
device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
detach_i2c_chip(state->monitor);
state->monitor = NULL;
}
......@@ -1532,7 +1503,6 @@ static void dispose_drives_state(struct drives_pid_state *state)
device_remove_file(&of_dev->dev, &dev_attr_drives_temperature);
device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
detach_i2c_chip(state->monitor);
state->monitor = NULL;
}
......@@ -1654,7 +1624,6 @@ static void dispose_dimms_state(struct dimm_pid_state *state)
device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature);
detach_i2c_chip(state->monitor);
state->monitor = NULL;
}
......@@ -1779,7 +1748,6 @@ static void dispose_slots_state(struct slots_pid_state *state)
device_remove_file(&of_dev->dev, &dev_attr_slots_temperature);
device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
detach_i2c_chip(state->monitor);
state->monitor = NULL;
}
......@@ -2008,8 +1976,6 @@ static int attach_fcu(void)
*/
static void detach_fcu(void)
{
if (fcu)
detach_i2c_chip(fcu);
fcu = NULL;
}
......@@ -2060,12 +2026,21 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
return 0;
}
static int therm_pm72_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
/* Always succeed, the real work was done in therm_pm72_attach() */
return 0;
}
/*
* Called on every adapter when the driver or the i2c controller
* Called when any of the devices which participates into thermal management
* is going away.
*/
static int therm_pm72_detach(struct i2c_adapter *adapter)
static int therm_pm72_remove(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
mutex_lock(&driver_lock);
if (state != state_detached)
......@@ -2096,6 +2071,30 @@ static int therm_pm72_detach(struct i2c_adapter *adapter)
return 0;
}
/*
* i2c_driver structure to attach to the host i2c controller
*/
static const struct i2c_device_id therm_pm72_id[] = {
/*
* Fake device name, thermal management is done by several
* chips but we don't need to differentiate between them at
* this point.
*/
{ "therm_pm72", 0 },
{ }
};
static struct i2c_driver therm_pm72_driver = {
.driver = {
.name = "therm_pm72",
},
.attach_adapter = therm_pm72_attach,
.probe = therm_pm72_probe,
.remove = therm_pm72_remove,
.id_table = therm_pm72_id,
};
static int fan_check_loc_match(const char *loc, int fan)
{
char tmp[64];
......
......@@ -48,16 +48,6 @@
#define LOG_TEMP 0 /* continously log temperature */
static int do_probe( struct i2c_adapter *adapter, int addr, int kind);
/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
0x4c, 0x4d, 0x4e, 0x4f,
0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
static struct {
volatile int running;
struct task_struct *poll_task;
......@@ -315,53 +305,54 @@ static int control_loop(void *dummy)
static int
do_attach( struct i2c_adapter *adapter )
{
int ret = 0;
/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
static const unsigned short scan_ds1775[] = {
0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
I2C_CLIENT_END
};
static const unsigned short scan_adm1030[] = {
0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END
};
if( strncmp(adapter->name, "uni-n", 5) )
return 0;
if( !x.running ) {
ret = i2c_probe( adapter, &addr_data, &do_probe );
struct i2c_board_info info;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
i2c_new_probed_device(adapter, &info, scan_ds1775);
strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
i2c_new_probed_device(adapter, &info, scan_adm1030);
if( x.thermostat && x.fan ) {
x.running = 1;
x.poll_task = kthread_run(control_loop, NULL, "g4fand");
}
}
return ret;
return 0;
}
static int
do_detach( struct i2c_client *client )
do_remove(struct i2c_client *client)
{
int err;
if( (err=i2c_detach_client(client)) )
printk(KERN_ERR "failed to detach thermostat client\n");
else {
if( x.running ) {
x.running = 0;
kthread_stop(x.poll_task);
x.poll_task = NULL;
}
if( client == x.thermostat )
x.thermostat = NULL;
else if( client == x.fan )
x.fan = NULL;
else {
printk(KERN_ERR "g4fan: bad client\n");
}
kfree( client );
if (x.running) {
x.running = 0;
kthread_stop(x.poll_task);
x.poll_task = NULL;
}
return err;
}
if (client == x.thermostat)
x.thermostat = NULL;
else if (client == x.fan)
x.fan = NULL;
else
printk(KERN_ERR "g4fan: bad client\n");
static struct i2c_driver g4fan_driver = {
.driver = {
.name = "therm_windtunnel",
},
.attach_adapter = do_attach,
.detach_client = do_detach,
};
return 0;
}
static int
attach_fan( struct i2c_client *cl )
......@@ -374,13 +365,8 @@ attach_fan( struct i2c_client *cl )
goto out;
printk("ADM1030 fan controller [@%02x]\n", cl->addr );
strlcpy( cl->name, "ADM1030 fan controller", sizeof(cl->name) );
if( !i2c_attach_client(cl) )
x.fan = cl;
x.fan = cl;
out:
if( cl != x.fan )
kfree( cl );
return 0;
}
......@@ -412,39 +398,47 @@ attach_thermostat( struct i2c_client *cl )
x.temp = temp;
x.overheat_temp = os_temp;
x.overheat_hyst = hyst_temp;
strlcpy( cl->name, "DS1775 thermostat", sizeof(cl->name) );
if( !i2c_attach_client(cl) )
x.thermostat = cl;
x.thermostat = cl;
out:
if( cl != x.thermostat )
kfree( cl );
return 0;
}
enum chip { ds1775, adm1030 };
static const struct i2c_device_id therm_windtunnel_id[] = {
{ "therm_ds1775", ds1775 },
{ "therm_adm1030", adm1030 },
{ }
};
static int
do_probe( struct i2c_adapter *adapter, int addr, int kind )
do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct i2c_client *cl;
struct i2c_adapter *adapter = cl->adapter;
if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE) )
return 0;
if( !(cl=kzalloc(sizeof(*cl), GFP_KERNEL)) )
return -ENOMEM;
cl->addr = addr;
cl->adapter = adapter;
cl->driver = &g4fan_driver;
cl->flags = 0;
if( addr < 0x48 )
switch (id->driver_data) {
case adm1030:
return attach_fan( cl );
return attach_thermostat( cl );
case ds1775:
return attach_thermostat(cl);
}
return 0;
}
static struct i2c_driver g4fan_driver = {
.driver = {
.name = "therm_windtunnel",
},
.attach_adapter = do_attach,
.probe = do_probe,
.remove = do_remove,
.id_table = therm_windtunnel_id,
};
/************************************************************************/
/* initialization / cleanup */
......
......@@ -37,34 +37,22 @@
struct wf_lm75_sensor {
int ds1775 : 1;
int inited : 1;
struct i2c_client i2c;
struct i2c_client *i2c;
struct wf_sensor sens;
};
#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
static int wf_lm75_attach(struct i2c_adapter *adapter);
static int wf_lm75_detach(struct i2c_client *client);
static struct i2c_driver wf_lm75_driver = {
.driver = {
.name = "wf_lm75",
},
.attach_adapter = wf_lm75_attach,
.detach_client = wf_lm75_detach,
};
static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
{
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
s32 data;
if (lm->i2c.adapter == NULL)
if (lm->i2c == NULL)
return -ENODEV;
/* Init chip if necessary */
if (!lm->inited) {
u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
sr->name, cfg);
......@@ -73,7 +61,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
* the firmware for now
*/
cfg_new = cfg & ~0x01;
i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
lm->inited = 1;
/* If we just powered it up, let's wait 200 ms */
......@@ -81,7 +69,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
}
/* Read temperature register */
data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
data <<= 8;
*value = data;
......@@ -92,12 +80,6 @@ static void wf_lm75_release(struct wf_sensor *sr)
{
struct wf_lm75_sensor *lm = wf_to_lm75(sr);
/* check if client is registered and detach from i2c */
if (lm->i2c.adapter) {
i2c_detach_client(&lm->i2c);
lm->i2c.adapter = NULL;
}
kfree(lm);
}
......@@ -107,59 +89,77 @@ static struct wf_sensor_ops wf_lm75_ops = {
.owner = THIS_MODULE,
};
static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
u8 addr, int ds1775,
const char *loc)
static int wf_lm75_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct wf_lm75_sensor *lm;
int rc;
DBG("wf_lm75: creating %s device at address 0x%02x\n",
ds1775 ? "ds1775" : "lm75", addr);
lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
if (lm == NULL)
return NULL;
return -ENODEV;
lm->inited = 0;
lm->ds1775 = id->driver_data;
lm->i2c = client;
lm->sens.name = client->dev.platform_data;
lm->sens.ops = &wf_lm75_ops;
i2c_set_clientdata(client, lm);
rc = wf_register_sensor(&lm->sens);
if (rc) {
i2c_set_clientdata(client, NULL);
kfree(lm);
}
return rc;
}
static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
u8 addr, int ds1775,
const char *loc)
{
struct i2c_board_info info;
struct i2c_client *client;
char *name;
DBG("wf_lm75: creating %s device at address 0x%02x\n",
ds1775 ? "ds1775" : "lm75", addr);
/* Usual rant about sensor names not beeing very consistent in
* the device-tree, oh well ...
* Add more entries below as you deal with more setups
*/
if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
lm->sens.name = "hd-temp";
name = "hd-temp";
else if (!strcmp(loc, "Incoming Air Temp"))
lm->sens.name = "incoming-air-temp";
name = "incoming-air-temp";
else if (!strcmp(loc, "ODD Temp"))
lm->sens.name = "optical-drive-temp";
name = "optical-drive-temp";
else if (!strcmp(loc, "HD Temp"))
lm->sens.name = "hard-drive-temp";
name = "hard-drive-temp";
else
goto fail;
lm->inited = 0;
lm->sens.ops = &wf_lm75_ops;
lm->ds1775 = ds1775;
lm->i2c.addr = (addr >> 1) & 0x7f;
lm->i2c.adapter = adapter;
lm->i2c.driver = &wf_lm75_driver;
strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
rc = i2c_attach_client(&lm->i2c);
if (rc) {
printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
" err %d\n", ds1775 ? "ds1775" : "lm75",
lm->i2c.name, rc);
goto fail;
}
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = (addr >> 1) & 0x7f;
info.platform_data = name;
strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
if (wf_register_sensor(&lm->sens)) {
i2c_detach_client(&lm->i2c);
client = i2c_new_device(adapter, &info);
if (client == NULL) {
printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
ds1775 ? "ds1775" : "lm75", name);
goto fail;
}
return lm;
/*
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
list_add_tail(&client->detected, &client->driver->clients);
return client;
fail:
kfree(lm);
return NULL;
}
......@@ -202,21 +202,38 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
return 0;
}
static int wf_lm75_detach(struct i2c_client *client)
static int wf_lm75_remove(struct i2c_client *client)
{
struct wf_lm75_sensor *lm = i2c_to_lm75(client);
struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
/* Mark client detached */
lm->i2c.adapter = NULL;
lm->i2c = NULL;
/* release sensor */
wf_unregister_sensor(&lm->sens);
i2c_set_clientdata(client, NULL);
return 0;
}
static const struct i2c_device_id wf_lm75_id[] = {
{ "wf_lm75", 0 },
{ "wf_ds1775", 1 },
{ }
};
static struct i2c_driver wf_lm75_driver = {
.driver = {
.name = "wf_lm75",
},
.attach_adapter = wf_lm75_attach,
.probe = wf_lm75_probe,
.remove = wf_lm75_remove,
.id_table = wf_lm75_id,
};
static int __init wf_lm75_sensor_init(void)
{
/* Don't register on old machines that use therm_pm72 for now */
......
......@@ -26,34 +26,22 @@
#define MAX6690_EXTERNAL_TEMP 1
struct wf_6690_sensor {
struct i2c_client i2c;
struct i2c_client *i2c;
struct wf_sensor sens;
};
#define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens)
#define i2c_to_6690(x) container_of((x), struct wf_6690_sensor, i2c)
static int wf_max6690_attach(struct i2c_adapter *adapter);
static int wf_max6690_detach(struct i2c_client *client);
static struct i2c_driver wf_max6690_driver = {
.driver = {
.name = "wf_max6690",
},
.attach_adapter = wf_max6690_attach,
.detach_client = wf_max6690_detach,
};
static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
{
struct wf_6690_sensor *max = wf_to_6690(sr);
s32 data;
if (max->i2c.adapter == NULL)
if (max->i2c == NULL)
return -ENODEV;
/* chip gets initialized by firmware */
data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP);
if (data < 0)
return data;
*value = data << 16;
......@@ -64,10 +52,6 @@ static void wf_max6690_release(struct wf_sensor *sr)
{
struct wf_6690_sensor *max = wf_to_6690(sr);
if (max->i2c.adapter) {
i2c_detach_client(&max->i2c);
max->i2c.adapter = NULL;
}
kfree(max);
}
......@@ -77,19 +61,40 @@ static struct wf_sensor_ops wf_max6690_ops = {
.owner = THIS_MODULE,
};
static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
const char *loc)
static int wf_max6690_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct wf_6690_sensor *max;
char *name;
int rc;
max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
if (max == NULL) {
printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
"no memory\n", loc);
return;
printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
"no memory\n");
return -ENOMEM;
}
max->i2c = client;
max->sens.name = client->dev.platform_data;
max->sens.ops = &wf_max6690_ops;
i2c_set_clientdata(client, max);
rc = wf_register_sensor(&max->sens);
if (rc) {
i2c_set_clientdata(client, NULL);
kfree(max);
}
return rc;
}
static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
u8 addr, const char *loc)
{
struct i2c_board_info info;
struct i2c_client *client;
char *name;
if (!strcmp(loc, "BACKSIDE"))
name = "backside-temp";
else if (!strcmp(loc, "NB Ambient"))
......@@ -99,27 +104,26 @@ static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
else
goto fail;
max->sens.ops = &wf_max6690_ops;
max->sens.name = name;
max->i2c.addr = addr >> 1;
max->i2c.adapter = adapter;
max->i2c.driver = &wf_max6690_driver;
strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = addr >> 1;
info.platform_data = name;
strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE);
if (i2c_attach_client(&max->i2c)) {
client = i2c_new_device(adapter, &info);
if (client == NULL) {
printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
goto fail;
}
if (wf_register_sensor(&max->sens)) {
i2c_detach_client(&max->i2c);
goto fail;
}
return;
/*
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
list_add_tail(&client->detected, &client->driver->clients);
return client;
fail:
kfree(max);
return NULL;
}
static int wf_max6690_attach(struct i2c_adapter *adapter)
......@@ -154,16 +158,31 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
return 0;
}
static int wf_max6690_detach(struct i2c_client *client)
static int wf_max6690_remove(struct i2c_client *client)
{
struct wf_6690_sensor *max = i2c_to_6690(client);
struct wf_6690_sensor *max = i2c_get_clientdata(client);
max->i2c.adapter = NULL;
max->i2c = NULL;
wf_unregister_sensor(&max->sens);
return 0;
}
static const struct i2c_device_id wf_max6690_id[] = {
{ "wf_max6690", 0 },
{ }
};
static struct i2c_driver wf_max6690_driver = {
.driver = {
.name = "wf_max6690",
},
.attach_adapter = wf_max6690_attach,
.probe = wf_max6690_probe,
.remove = wf_max6690_remove,
.id_table = wf_max6690_id,
};
static int __init wf_max6690_sensor_init(void)
{
/* Don't register on old machines that use therm_pm72 for now */
......
......@@ -39,7 +39,7 @@ struct wf_sat {
struct mutex mutex;
unsigned long last_read; /* jiffies when cache last updated */
u8 cache[16];
struct i2c_client i2c;
struct i2c_client *i2c;
struct device_node *node;
};
......@@ -54,18 +54,6 @@ struct wf_sat_sensor {
};
#define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens)
#define i2c_to_sat(c) container_of(c, struct wf_sat, i2c)
static int wf_sat_attach(struct i2c_adapter *adapter);
static int wf_sat_detach(struct i2c_client *client);
static struct i2c_driver wf_sat_driver = {
.driver = {
.name = "wf_smu_sat",
},
.attach_adapter = wf_sat_attach,
.detach_client = wf_sat_detach,
};
struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
unsigned int *size)
......@@ -81,13 +69,13 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
return NULL;
err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
err = i2c_smbus_write_word_data(sat->i2c, 8, id << 8);
if (err) {
printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
return NULL;
}
err = i2c_smbus_read_word_data(&sat->i2c, 9);
err = i2c_smbus_read_word_data(sat->i2c, 9);
if (err < 0) {
printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
return NULL;
......@@ -105,7 +93,7 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
return NULL;
for (i = 0; i < len; i += 4) {
err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data);
err = i2c_smbus_read_i2c_block_data(sat->i2c, 0xa, 4, data);
if (err < 0) {
printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
err);
......@@ -138,7 +126,7 @@ static int wf_sat_read_cache(struct wf_sat *sat)
{
int err;
err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache);
err = i2c_smbus_read_i2c_block_data(sat->i2c, 0x3f, 16, sat->cache);
if (err < 0)
return err;
sat->last_read = jiffies;
......@@ -161,7 +149,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
int i, err;
s32 val;
if (sat->i2c.adapter == NULL)
if (sat->i2c == NULL)
return -ENODEV;
mutex_lock(&sat->mutex);
......@@ -193,10 +181,6 @@ static void wf_sat_release(struct wf_sensor *sr)
struct wf_sat *sat = sens->sat;
if (atomic_dec_and_test(&sat->refcnt)) {
if (sat->i2c.adapter) {
i2c_detach_client(&sat->i2c);
sat->i2c.adapter = NULL;
}
if (sat->nr >= 0)
sats[sat->nr] = NULL;
kfree(sat);
......@@ -212,38 +196,58 @@ static struct wf_sensor_ops wf_sat_ops = {
static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
{
struct i2c_board_info info;
struct i2c_client *client;
const u32 *reg;
u8 addr;
reg = of_get_property(dev, "reg", NULL);
if (reg == NULL)
return;
addr = *reg;
DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = (addr >> 1) & 0x7f;
info.platform_data = dev;
strlcpy(info.type, "wf_sat", I2C_NAME_SIZE);
client = i2c_new_device(adapter, &info);
if (client == NULL) {
printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
return;
}
/*
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
list_add_tail(&client->detected, &client->driver->clients);
}
static int wf_sat_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *dev = client->dev.platform_data;
struct wf_sat *sat;
struct wf_sat_sensor *sens;
const u32 *reg;
const char *loc, *type;
u8 addr, chip, core;
u8 chip, core;
struct device_node *child;
int shift, cpu, index;
char *name;
int vsens[2], isens[2];
reg = of_get_property(dev, "reg", NULL);
if (reg == NULL)
return;
addr = *reg;
DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
if (sat == NULL)
return;
return -ENOMEM;
sat->nr = -1;
sat->node = of_node_get(dev);
atomic_set(&sat->refcnt, 0);
mutex_init(&sat->mutex);
sat->i2c.addr = (addr >> 1) & 0x7f;
sat->i2c.adapter = adapter;
sat->i2c.driver = &wf_sat_driver;
strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
if (i2c_attach_client(&sat->i2c)) {
printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
goto fail;
}
sat->i2c = client;
i2c_set_clientdata(client, sat);
vsens[0] = vsens[1] = -1;
isens[0] = isens[1] = -1;
......@@ -344,10 +348,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
if (sat->nr >= 0)
sats[sat->nr] = sat;
return;
fail:
kfree(sat);
return 0;
}
static int wf_sat_attach(struct i2c_adapter *adapter)
......@@ -366,16 +367,32 @@ static int wf_sat_attach(struct i2c_adapter *adapter)
return 0;
}
static int wf_sat_detach(struct i2c_client *client)
static int wf_sat_remove(struct i2c_client *client)
{
struct wf_sat *sat = i2c_to_sat(client);
struct wf_sat *sat = i2c_get_clientdata(client);
/* XXX TODO */
sat->i2c.adapter = NULL;
sat->i2c = NULL;
i2c_set_clientdata(client, NULL);
return 0;
}
static const struct i2c_device_id wf_sat_id[] = {
{ "wf_sat", 0 },
{ }
};
static struct i2c_driver wf_sat_driver = {
.driver = {
.name = "wf_smu_sat",
},
.attach_adapter = wf_sat_attach,
.probe = wf_sat_probe,
.remove = wf_sat_remove,
.id_table = wf_sat_id,
};
static int __init sat_sensors_init(void)
{
return i2c_add_driver(&wf_sat_driver);
......
......@@ -48,6 +48,20 @@ config EEPROM_LEGACY
This driver can also be built as a module. If so, the module
will be called eeprom.
config EEPROM_MAX6875
tristate "Maxim MAX6874/5 power supply supervisor"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get read-only support for the user EEPROM of
the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
sequencer/supervisor.
All other features of this chip should be accessed via i2c-dev.
This driver can also be built as a module. If so, the module
will be called max6875.
config EEPROM_93CX6
tristate "EEPROM 93CX6 support"
help
......
obj-$(CONFIG_EEPROM_AT24) += at24.o
obj-$(CONFIG_EEPROM_AT25) += at25.o
obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
......@@ -3,7 +3,7 @@
Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
Based on i2c/chips/eeprom.c
Based on eeprom.c
The MAX6875 has a bank of registers and two banks of EEPROM.
Address ranges are defined as follows:
......
......@@ -1315,7 +1315,6 @@ static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
chan->adapter.owner = THIS_MODULE;
chan->adapter.class = I2C_CLASS_TV_ANALOG;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = dev;
chan->algo.setsda = tdfxfb_i2c_setsda;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment