Commit 48888cc6 authored by Adrian Bunk's avatar Adrian Bunk Committed by John W. Linville

[PATCH] kill include/linux/eeprom.h

This patch kills include/linux/eeprom.h .

Rationale:
- it was only used by one single driver
- even this driver didn't do anything useful with it
- most of this file are non-inline and non-static functions (sic)

This removes include/linux/eeprom.h and cleans drivers/net/ns83820.c up.

If you think eeprom.h should be used more extensively, please consider:
- the code has to be moved from the header file to a .c file
- the currently empty write function has to be implemented
- ns83820.c or any other driver should actually use it

Noone did any of these during the more than 3 years eeprom.h already
exists...
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 8e3babcd
......@@ -110,7 +110,6 @@
#include <linux/init.h>
#include <linux/ip.h> /* for iph */
#include <linux/in.h> /* for IPPROTO_... */
#include <linux/eeprom.h>
#include <linux/compiler.h>
#include <linux/prefetch.h>
#include <linux/ethtool.h>
......@@ -445,7 +444,6 @@ struct ns83820 {
u32 MEAR_cache;
u32 IMR_cache;
struct eeprom ee;
unsigned linkstate;
......@@ -1558,15 +1556,13 @@ static void ns83820_getmac(struct ns83820 *dev, u8 *mac)
unsigned i;
for (i=0; i<3; i++) {
u32 data;
#if 0 /* I've left this in as an example of how to use eeprom.h */
data = eeprom_readw(&dev->ee, 0xa + 2 - i);
#else
/* Read from the perfect match memory: this is loaded by
* the chip from the EEPROM via the EELOAD self test.
*/
writel(i*2, dev->base + RFCR);
data = readl(dev->base + RFDR);
#endif
*mac++ = data;
*mac++ = data >> 8;
}
......@@ -1851,8 +1847,6 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
spin_lock_init(&dev->misc_lock);
dev->pci_dev = pci_dev;
dev->ee.cache = &dev->MEAR_cache;
dev->ee.lock = &dev->misc_lock;
SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pci_dev->dev);
......@@ -1887,9 +1881,6 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
dev->IMR_cache = 0;
setup_ee_mem_bitbanger(&dev->ee, dev->base + MEAR, 3, 2, 1, 0,
0);
err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
DRV_NAME, ndev);
if (err) {
......
/* credit winbond-840.c
*/
#include <asm/io.h>
struct eeprom_ops {
void (*set_cs)(void *ee);
void (*clear_cs)(void *ee);
};
#define EEPOL_EEDI 0x01
#define EEPOL_EEDO 0x02
#define EEPOL_EECLK 0x04
#define EEPOL_EESEL 0x08
struct eeprom {
void *dev;
struct eeprom_ops *ops;
void __iomem * addr;
unsigned ee_addr_bits;
unsigned eesel;
unsigned eeclk;
unsigned eedo;
unsigned eedi;
unsigned polarity;
unsigned ee_state;
spinlock_t *lock;
u32 *cache;
};
u8 eeprom_readb(struct eeprom *ee, unsigned address);
void eeprom_read(struct eeprom *ee, unsigned address, u8 *bytes,
unsigned count);
void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data);
void eeprom_write(struct eeprom *ee, unsigned address, u8 *bytes,
unsigned count);
/* The EEPROM commands include the alway-set leading bit. */
enum EEPROM_Cmds {
EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
};
void setup_ee_mem_bitbanger(struct eeprom *ee, void __iomem *memaddr, int eesel_bit, int eeclk_bit, int eedo_bit, int eedi_bit, unsigned polarity)
{
ee->addr = memaddr;
ee->eesel = 1 << eesel_bit;
ee->eeclk = 1 << eeclk_bit;
ee->eedo = 1 << eedo_bit;
ee->eedi = 1 << eedi_bit;
ee->polarity = polarity;
*ee->cache = readl(ee->addr);
}
/* foo. put this in a .c file */
static inline void eeprom_update(struct eeprom *ee, u32 mask, int pol)
{
unsigned long flags;
u32 data;
spin_lock_irqsave(ee->lock, flags);
data = *ee->cache;
data &= ~mask;
if (pol)
data |= mask;
*ee->cache = data;
//printk("update: %08x\n", data);
writel(data, ee->addr);
spin_unlock_irqrestore(ee->lock, flags);
}
void eeprom_clk_lo(struct eeprom *ee)
{
int pol = !!(ee->polarity & EEPOL_EECLK);
eeprom_update(ee, ee->eeclk, pol);
udelay(2);
}
void eeprom_clk_hi(struct eeprom *ee)
{
int pol = !!(ee->polarity & EEPOL_EECLK);
eeprom_update(ee, ee->eeclk, !pol);
udelay(2);
}
void eeprom_send_addr(struct eeprom *ee, unsigned address)
{
int pol = !!(ee->polarity & EEPOL_EEDI);
unsigned i;
address |= 6 << 6;
/* Shift the read command bits out. */
for (i=0; i<11; i++) {
eeprom_update(ee, ee->eedi, ((address >> 10) & 1) ^ pol);
address <<= 1;
eeprom_clk_hi(ee);
eeprom_clk_lo(ee);
}
eeprom_update(ee, ee->eedi, pol);
}
u16 eeprom_readw(struct eeprom *ee, unsigned address)
{
unsigned i;
u16 res = 0;
eeprom_clk_lo(ee);
eeprom_update(ee, ee->eesel, 1 ^ !!(ee->polarity & EEPOL_EESEL));
eeprom_send_addr(ee, address);
for (i=0; i<16; i++) {
u32 data;
eeprom_clk_hi(ee);
res <<= 1;
data = readl(ee->addr);
//printk("eeprom_readw: %08x\n", data);
res |= !!(data & ee->eedo) ^ !!(ee->polarity & EEPOL_EEDO);
eeprom_clk_lo(ee);
}
eeprom_update(ee, ee->eesel, 0 ^ !!(ee->polarity & EEPOL_EESEL));
return res;
}
void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data)
{
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment