dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180

The qcom,dispcc bindings had a few problems with them:

1. They didn't specify all the clocks that dispcc is a client of.
   Specifically on sc7180 there are two clocks from the DSI PHY and
   two from the DP PHY.  On sdm845 there are actually two DSI PHYs
   (each of which has two clocks) and an extra clock from the gcc.
   These all need to be specified.

2. The sdm845.dtsi has existed for quite some time without specifying
   the clocks.  The Linux driver was relying on global names to match
   things up.  While we should transition things, it should be noted
   in the bindings.

3. The names used the bindings for "xo" and "gpll0" didn't match the
   names that QC used for these clocks internally and this was causing
   confusion / difficulty with their code generation tools.  Switched
   to the internal names to simplify everyone's lives.  It's not quite
   as clean in a purist sense but it should avoid headaches.  This
   officially changes the binding, but that seems OK in this case.

Also note that I updated the example.

Fixes: 5d28e44b ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Documentation/devicetree/bindings/clock/qcom,dispcc.yaml → Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml

 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/qcom,dispcc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding
+title: Qualcomm Display Clock & Reset Controller Binding for SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
   Qualcomm display clock control module which supports the clocks, resets and
-  power domains.
+  power domains on SC7180.
+
+  See also dt-bindings/clock/qcom,dispcc-sc7180.h.
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-dispcc
-      - qcom,sdm845-dispcc
+    const: qcom,sc7180-dispcc
 
   clocks:
-    minItems: 1
-    maxItems: 2
     items:
       - description: Board XO source
       - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
 
   clock-names:
     items:
-      - const: xo
-      - const: gpll0
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
 
   '#clock-cells':
     const: 1
@@ -53,15 +59,26 @@ required:
   - '#power-domain-cells'
 
 examples:
-  # Example of DISPCC with clock node properties for SDM845:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@af00000 {
-      compatible = "qcom,sdm845-dispcc";
-      reg = <0xaf00000 0x10000>;
-      clocks = <&rpmhcc 0>, <&gcc 24>;
-      clock-names = "xo", "gpll0";
+      compatible = "qcom,sc7180-dispcc";
+      reg = <0 0x0af00000 0 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-     };
+    };
 ...

Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+
+properties:
+  compatible:
+    const: qcom,sdm845-dispcc
+
+  # NOTE: sdm845.dtsi existed for quite some time and specified no clocks.
+  # The code had to use hardcoded mechanisms to find the input clocks.
+  # New dts files should have these clocks.
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_link_clk_divsel_ten
+      - const: dp_vco_divided_clk_src_mux
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sdm845-dispcc";
+      reg = <0 0x0af00000 0 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "gcc_disp_gpll0_div_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_link_clk_divsel_ten",
+                    "dp_vco_divided_clk_src_mux";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...