dm: add writecache target

The writecache target caches writes on persistent memory or SSD.
It is intended for databases or other programs that need extremely low
commit latency.

The writecache target doesn't cache reads because reads are supposed to
be cached in page cache in normal RAM.

If persistent memory isn't available this target can still be used in
SSD mode.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix missing goto
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> # fix compilation issue with !DAX
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> # use msecs_to_jiffies
Acked-by: Dan Williams <dan.j.williams@intel.com> # reworks to unify ARM and x86 flushing
Signed-off-by: Mike Snitzer <msnitzer@redhat.com>

Documentation/device-mapper/writecache.txt

+The writecache target caches writes on persistent memory or on SSD. It
+doesn't cache reads because reads are supposed to be cached in page cache
+in normal RAM.
+
+When the device is constructed, the first sector should be zeroed or the
+first sector should contain valid superblock from previous invocation.
+
+Constructor parameters:
+1. type of the cache device - "p" or "s"
+	p - persistent memory
+	s - SSD
+2. the underlying device that will be cached
+3. the cache device
+4. block size (4096 is recommended; the maximum block size is the page
+   size)
+5. the number of optional parameters (the parameters with an argument
+   count as two)
+	high_watermark n	(default: 50)
+		start writeback when the number of used blocks reach this
+		watermark
+	low_watermark x		(default: 45)
+		stop writeback when the number of used blocks drops below
+		this watermark
+	writeback_jobs n	(default: unlimited)
+		limit the number of blocks that are in flight during
+		writeback. Setting this value reduces writeback
+		throughput, but it may improve latency of read requests
+	autocommit_blocks n	(default: 64 for pmem, 65536 for ssd)
+		when the application writes this amount of blocks without
+		issuing the FLUSH request, the blocks are automatically
+		commited
+	autocommit_time ms	(default: 1000)
+		autocommit time in milliseconds. The data is automatically
+		commited if this time passes and no FLUSH request is
+		received
+	fua			(by default on)
+		applicable only to persistent memory - use the FUA flag
+		when writing data from persistent memory back to the
+		underlying device
+	nofua
+		applicable only to persistent memory - don't use the FUA
+		flag when writing back data and send the FLUSH request
+		afterwards
+		- some underlying devices perform better with fua, some
+		  with nofua. The user should test it
+
+Status:
+1. error indicator - 0 if there was no error, otherwise error number
+2. the number of blocks
+3. the number of free blocks
+4. the number of blocks under writeback
+
+Messages:
+	flush
+		flush the cache device. The message returns successfully
+		if the cache device was flushed without an error
+	flush_on_suspend
+		flush the cache device on next suspend. Use this message
+		when you are going to remove the cache device. The proper
+		sequence for removing the cache device is:
+		1. send the "flush_on_suspend" message
+		2. load an inactive table with a linear target that maps
+		   to the underlying device
+		3. suspend the device
+		4. ask for status and verify that there are no errors
+		5. resume the device, so that it will use the linear
+		   target
+		6. the cache device is now inactive and it can be deleted

drivers/md/Kconfig

@@ -334,6 +334,17 @@ config DM_CACHE_SMQ
          of less memory utilization, improved performance and increased
          adaptability in the face of changing workloads.
 
+config DM_WRITECACHE
+	tristate "Writecache target"
+	depends on BLK_DEV_DM
+	---help---
+	   The writecache target caches writes on persistent memory or SSD.
+	   It is intended for databases or other programs that need extremely
+	   low commit latency.
+
+	   The writecache target doesn't cache reads because reads are supposed
+	   to be cached in standard RAM.
+
 config DM_ERA
        tristate "Era target (EXPERIMENTAL)"
        depends on BLK_DEV_DM

drivers/md/Makefile

@@ -67,6 +67,7 @@ obj-$(CONFIG_DM_ERA)		+= dm-era.o
 obj-$(CONFIG_DM_LOG_WRITES)	+= dm-log-writes.o
 obj-$(CONFIG_DM_INTEGRITY)	+= dm-integrity.o
 obj-$(CONFIG_DM_ZONED)		+= dm-zoned.o
+obj-$(CONFIG_DM_WRITECACHE)	+= dm-writecache.o
 
 ifeq ($(CONFIG_DM_UEVENT),y)
 dm-mod-objs			+= dm-uevent.o