staging: ks7010: move sdio specific register definitions into source file

This commit moves SDIO related register definitions from header
to source file. There is no need to have those into the header
because they are only being used in specific SDIO code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ks7010/ks7010_sdio.c

@@ -23,6 +23,78 @@
 #include "ks7010_sdio.h"
 
 #define ROM_FILE "ks7010sd.rom"
+
+/*  SDIO KeyStream vendor and device */
+#define SDIO_VENDOR_ID_KS_CODE_A	0x005b
+#define SDIO_VENDOR_ID_KS_CODE_B	0x0023
+
+/* Older sources suggest earlier versions were named 7910 or 79xx */
+#define SDIO_DEVICE_ID_KS_7010		0x7910
+
+/* Read/Write Status Register */
+#define READ_STATUS		0x000000
+#define WRITE_STATUS		0x00000C
+enum reg_status_type {
+	REG_STATUS_BUSY,
+	REG_STATUS_IDLE
+};
+
+/* Read Index Register */
+#define READ_INDEX		0x000004
+
+/* Read Data Size Register */
+#define READ_DATA_SIZE		0x000008
+
+/* Write Index Register */
+#define WRITE_INDEX		0x000010
+
+/* Write Status/Read Data Size Register
+ * for network packet (less than 2048 bytes data)
+ */
+#define WSTATUS_RSIZE		0x000014
+#define WSTATUS_MASK		0x80	/* Write Status Register value */
+#define RSIZE_MASK		0x7F	/* Read Data Size Register value [10:4] */
+
+/* ARM to SD interrupt Enable */
+#define INT_ENABLE		0x000020
+/* ARM to SD interrupt Pending */
+#define INT_PENDING		0x000024
+
+#define INT_GCR_B              BIT(7)
+#define INT_GCR_A              BIT(6)
+#define INT_WRITE_STATUS       BIT(5)
+#define INT_WRITE_INDEX        BIT(4)
+#define INT_WRITE_SIZE         BIT(3)
+#define INT_READ_STATUS        BIT(2)
+#define INT_READ_INDEX         BIT(1)
+#define INT_READ_SIZE          BIT(0)
+
+/* General Communication Register A */
+#define GCR_A			0x000028
+enum gen_com_reg_a {
+	GCR_A_INIT,
+	GCR_A_REMAP,
+	GCR_A_RUN
+};
+
+/* General Communication Register B */
+#define GCR_B			0x00002C
+enum gen_com_reg_b {
+	GCR_B_ACTIVE,
+	GCR_B_DOZE
+};
+
+/* Wakeup Register */
+#define WAKEUP			0x008018
+#define WAKEUP_REQ		0x5a
+
+/* AHB Data Window  0x010000-0x01FFFF */
+#define DATA_WINDOW		0x010000
+#define WINDOW_SIZE		(64 * 1024)
+
+#define KS7010_IRAM_ADDRESS	0x06000000
+
+
 #define KS7010_FUNC_NUM 1
 #define KS7010_IO_BLOCK_SIZE 512
 #define KS7010_MAX_CLOCK 25000000

drivers/staging/ks7010/ks7010_sdio.h

@@ -11,75 +11,6 @@
 #ifndef _KS7010_SDIO_H
 #define _KS7010_SDIO_H
 
-/*  SDIO KeyStream vendor and device */
-#define SDIO_VENDOR_ID_KS_CODE_A	0x005b
-#define SDIO_VENDOR_ID_KS_CODE_B	0x0023
-/* Older sources suggest earlier versions were named 7910 or 79xx */
-#define SDIO_DEVICE_ID_KS_7010		0x7910
-
-/* Read/Write Status Register */
-#define READ_STATUS		0x000000
-#define WRITE_STATUS		0x00000C
-enum reg_status_type {
-	REG_STATUS_BUSY,
-	REG_STATUS_IDLE
-};
-
-/* Read Index Register */
-#define READ_INDEX		0x000004
-
-/* Read Data Size Register */
-#define READ_DATA_SIZE		0x000008
-
-/* Write Index Register */
-#define WRITE_INDEX		0x000010
-
-/* Write Status/Read Data Size Register
- * for network packet (less than 2048 bytes data)
- */
-#define WSTATUS_RSIZE		0x000014
-#define WSTATUS_MASK		0x80	/* Write Status Register value */
-#define RSIZE_MASK		0x7F	/* Read Data Size Register value [10:4] */
-
-/* ARM to SD interrupt Enable */
-#define INT_ENABLE		0x000020
-/* ARM to SD interrupt Pending */
-#define INT_PENDING		0x000024
-
-#define INT_GCR_B              BIT(7)
-#define INT_GCR_A              BIT(6)
-#define INT_WRITE_STATUS       BIT(5)
-#define INT_WRITE_INDEX        BIT(4)
-#define INT_WRITE_SIZE         BIT(3)
-#define INT_READ_STATUS        BIT(2)
-#define INT_READ_INDEX         BIT(1)
-#define INT_READ_SIZE          BIT(0)
-
-/* General Communication Register A */
-#define GCR_A			0x000028
-enum gen_com_reg_a {
-	GCR_A_INIT,
-	GCR_A_REMAP,
-	GCR_A_RUN
-};
-
-/* General Communication Register B */
-#define GCR_B			0x00002C
-enum gen_com_reg_b {
-	GCR_B_ACTIVE,
-	GCR_B_DOZE
-};
-
-/* Wakeup Register */
-#define WAKEUP			0x008018
-#define WAKEUP_REQ		0x5a
-
-/* AHB Data Window  0x010000-0x01FFFF */
-#define DATA_WINDOW		0x010000
-#define WINDOW_SIZE		(64 * 1024)
-
-#define KS7010_IRAM_ADDRESS	0x06000000
-
 /**
  * struct ks_sdio_card - SDIO device data.
  *