Commit 4990d4fe authored by Tony Lindgren's avatar Tony Lindgren Committed by Rafael J. Wysocki

PM / Wakeirq: Add automated device wake IRQ handling

Turns out we can automate the handling for the device_may_wakeup()
quite a bit by using the kernel wakeup source list as suggested
by Rafael J. Wysocki <rjw@rjwysocki.net>.

And as some hardware has separate dedicated wake-up interrupt
in addition to the IO interrupt, we can automate the handling by
adding a generic threaded interrupt handler that just calls the
device PM runtime to wake up the device.

This allows dropping code from device drivers as we currently
are doing it in multiple ways, and often wrong.

For most drivers, we should be able to drop the following
boilerplate code from runtime_suspend and runtime_resume
functions:

	...
	device_init_wakeup(dev, true);
	...
	if (device_may_wakeup(dev))
		enable_irq_wake(irq);
	...
	if (device_may_wakeup(dev))
		disable_irq_wake(irq);
	...
	device_init_wakeup(dev, false);
	...

We can replace it with just the following init and exit
time code:

	...
	device_init_wakeup(dev, true);
	dev_pm_set_wake_irq(dev, irq);
	...
	dev_pm_clear_wake_irq(dev);
	device_init_wakeup(dev, false);
	...

And for hardware with dedicated wake-up interrupts:

	...
	device_init_wakeup(dev, true);
	dev_pm_set_dedicated_wake_irq(dev, irq);
	...
	dev_pm_clear_wake_irq(dev);
	device_init_wakeup(dev, false);
	...
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 56f487c7
obj-$(CONFIG_PM) += sysfs.o generic_ops.o common.o qos.o runtime.o
obj-$(CONFIG_PM) += sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
obj-$(CONFIG_PM_OPP) += opp.o
......
......@@ -24,6 +24,7 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/pm-trace.h>
#include <linux/pm_wakeirq.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/async.h>
......@@ -587,6 +588,7 @@ void dpm_resume_noirq(pm_message_t state)
async_synchronize_full();
dpm_show_time(starttime, state, "noirq");
resume_device_irqs();
device_wakeup_disarm_wake_irqs();
cpuidle_resume();
trace_suspend_resume(TPS("dpm_resume_noirq"), state.event, false);
}
......@@ -1104,6 +1106,7 @@ int dpm_suspend_noirq(pm_message_t state)
trace_suspend_resume(TPS("dpm_suspend_noirq"), state.event, true);
cpuidle_pause();
device_wakeup_arm_wake_irqs();
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
pm_transition = state;
......
......@@ -20,6 +20,46 @@ static inline void pm_runtime_early_init(struct device *dev)
extern void pm_runtime_init(struct device *dev);
extern void pm_runtime_remove(struct device *dev);
struct wake_irq {
struct device *dev;
int irq;
bool dedicated_irq:1;
};
extern void dev_pm_arm_wake_irq(struct wake_irq *wirq);
extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq);
#ifdef CONFIG_PM_SLEEP
extern int device_wakeup_attach_irq(struct device *dev,
struct wake_irq *wakeirq);
extern void device_wakeup_detach_irq(struct device *dev);
extern void device_wakeup_arm_wake_irqs(void);
extern void device_wakeup_disarm_wake_irqs(void);
#else
static inline int
device_wakeup_attach_irq(struct device *dev,
struct wake_irq *wakeirq)
{
return 0;
}
static inline void device_wakeup_detach_irq(struct device *dev)
{
}
static inline void device_wakeup_arm_wake_irqs(void)
{
}
static inline void device_wakeup_disarm_wake_irqs(void)
{
}
#endif /* CONFIG_PM_SLEEP */
/*
* sysfs.c
*/
......@@ -52,6 +92,14 @@ static inline void wakeup_sysfs_remove(struct device *dev) {}
static inline int pm_qos_sysfs_add(struct device *dev) { return 0; }
static inline void pm_qos_sysfs_remove(struct device *dev) {}
static inline void dev_pm_arm_wake_irq(struct wake_irq *wirq)
{
}
static inline void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
{
}
#endif
#ifdef CONFIG_PM_SLEEP
......
......@@ -10,6 +10,7 @@
#include <linux/sched.h>
#include <linux/export.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
#include <trace/events/rpm.h>
#include "power.h"
......@@ -514,6 +515,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_suspend);
dev_pm_enable_wake_irq(dev);
retval = rpm_callback(callback, dev);
if (retval)
goto fail;
......@@ -552,6 +554,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
return retval;
fail:
dev_pm_disable_wake_irq(dev);
__update_runtime_status(dev, RPM_ACTIVE);
dev->power.deferred_resume = false;
wake_up_all(&dev->power.wait_queue);
......@@ -734,10 +737,12 @@ static int rpm_resume(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_resume);
dev_pm_disable_wake_irq(dev);
retval = rpm_callback(callback, dev);
if (retval) {
__update_runtime_status(dev, RPM_SUSPENDED);
pm_runtime_cancel_pending(dev);
dev_pm_enable_wake_irq(dev);
} else {
no_callback:
__update_runtime_status(dev, RPM_ACTIVE);
......
/*
* wakeirq.c - Device wakeirq helper functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
#include "power.h"
/**
* dev_pm_attach_wake_irq - Attach device interrupt as a wake IRQ
* @dev: Device entry
* @irq: Device wake-up capable interrupt
* @wirq: Wake irq specific data
*
* Internal function to attach either a device IO interrupt or a
* dedicated wake-up interrupt as a wake IRQ.
*/
static int dev_pm_attach_wake_irq(struct device *dev, int irq,
struct wake_irq *wirq)
{
unsigned long flags;
int err;
if (!dev || !wirq)
return -EINVAL;
spin_lock_irqsave(&dev->power.lock, flags);
if (dev_WARN_ONCE(dev, dev->power.wakeirq,
"wake irq already initialized\n")) {
spin_unlock_irqrestore(&dev->power.lock, flags);
return -EEXIST;
}
dev->power.wakeirq = wirq;
spin_unlock_irqrestore(&dev->power.lock, flags);
err = device_wakeup_attach_irq(dev, wirq);
if (err)
return err;
return 0;
}
/**
* dev_pm_set_wake_irq - Attach device IO interrupt as wake IRQ
* @dev: Device entry
* @irq: Device IO interrupt
*
* Attach a device IO interrupt as a wake IRQ. The wake IRQ gets
* automatically configured for wake-up from suspend based
* on the device specific sysfs wakeup entry. Typically called
* during driver probe after calling device_init_wakeup().
*/
int dev_pm_set_wake_irq(struct device *dev, int irq)
{
struct wake_irq *wirq;
int err;
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
wirq->dev = dev;
wirq->irq = irq;
err = dev_pm_attach_wake_irq(dev, irq, wirq);
if (err)
kfree(wirq);
return err;
}
EXPORT_SYMBOL_GPL(dev_pm_set_wake_irq);
/**
* dev_pm_clear_wake_irq - Detach a device IO interrupt wake IRQ
* @dev: Device entry
*
* Detach a device wake IRQ and free resources.
*
* Note that it's OK for drivers to call this without calling
* dev_pm_set_wake_irq() as all the driver instances may not have
* a wake IRQ configured. This avoid adding wake IRQ specific
* checks into the drivers.
*/
void dev_pm_clear_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
unsigned long flags;
if (!wirq)
return;
spin_lock_irqsave(&dev->power.lock, flags);
dev->power.wakeirq = NULL;
spin_unlock_irqrestore(&dev->power.lock, flags);
device_wakeup_detach_irq(dev);
if (wirq->dedicated_irq)
free_irq(wirq->irq, wirq);
kfree(wirq);
}
EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq);
/**
* handle_threaded_wake_irq - Handler for dedicated wake-up interrupts
* @irq: Device specific dedicated wake-up interrupt
* @_wirq: Wake IRQ data
*
* Some devices have a separate wake-up interrupt in addition to the
* device IO interrupt. The wake-up interrupt signals that a device
* should be woken up from it's idle state. This handler uses device
* specific pm_runtime functions to wake the device, and then it's
* up to the device to do whatever it needs to. Note that as the
* device may need to restore context and start up regulators, we
* use a threaded IRQ.
*
* Also note that we are not resending the lost device interrupts.
* We assume that the wake-up interrupt just needs to wake-up the
* device, and then device's pm_runtime_resume() can deal with the
* situation.
*/
static irqreturn_t handle_threaded_wake_irq(int irq, void *_wirq)
{
struct wake_irq *wirq = _wirq;
int res;
/* We don't want RPM_ASYNC or RPM_NOWAIT here */
res = pm_runtime_resume(wirq->dev);
if (res < 0)
dev_warn(wirq->dev,
"wake IRQ with no resume: %i\n", res);
return IRQ_HANDLED;
}
/**
* dev_pm_set_dedicated_wake_irq - Request a dedicated wake-up interrupt
* @dev: Device entry
* @irq: Device wake-up interrupt
*
* Unless your hardware has separate wake-up interrupts in addition
* to the device IO interrupts, you don't need this.
*
* Sets up a threaded interrupt handler for a device that has
* a dedicated wake-up interrupt in addition to the device IO
* interrupt.
*
* The interrupt starts disabled, and needs to be managed for
* the device by the bus code or the device driver using
* dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq()
* functions.
*/
int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
{
struct wake_irq *wirq;
int err;
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
wirq->dev = dev;
wirq->irq = irq;
wirq->dedicated_irq = true;
irq_set_status_flags(irq, IRQ_NOAUTOEN);
/*
* Consumer device may need to power up and restore state
* so we use a threaded irq.
*/
err = request_threaded_irq(irq, NULL, handle_threaded_wake_irq,
IRQF_ONESHOT, dev_name(dev), wirq);
if (err)
goto err_free;
err = dev_pm_attach_wake_irq(dev, irq, wirq);
if (err)
goto err_free_irq;
return err;
err_free_irq:
free_irq(irq, wirq);
err_free:
kfree(wirq);
return err;
}
EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq);
/**
* dev_pm_enable_wake_irq - Enable device wake-up interrupt
* @dev: Device
*
* Called from the bus code or the device driver for
* runtime_suspend() to enable the wake-up interrupt while
* the device is running.
*
* Note that for runtime_suspend()) the wake-up interrupts
* should be unconditionally enabled unlike for suspend()
* that is conditional.
*/
void dev_pm_enable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (wirq && wirq->dedicated_irq)
enable_irq(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
/**
* dev_pm_disable_wake_irq - Disable device wake-up interrupt
* @dev: Device
*
* Called from the bus code or the device driver for
* runtime_resume() to disable the wake-up interrupt while
* the device is running.
*/
void dev_pm_disable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
if (wirq && wirq->dedicated_irq)
disable_irq_nosync(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_disable_wake_irq);
/**
* dev_pm_arm_wake_irq - Arm device wake-up
* @wirq: Device wake-up interrupt
*
* Sets up the wake-up event conditionally based on the
* device_may_wake().
*/
void dev_pm_arm_wake_irq(struct wake_irq *wirq)
{
if (!wirq)
return;
if (device_may_wakeup(wirq->dev))
enable_irq_wake(wirq->irq);
}
/**
* dev_pm_disarm_wake_irq - Disarm device wake-up
* @wirq: Device wake-up interrupt
*
* Clears up the wake-up event conditionally based on the
* device_may_wake().
*/
void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
{
if (!wirq)
return;
if (device_may_wakeup(wirq->dev))
disable_irq_wake(wirq->irq);
}
......@@ -14,6 +14,7 @@
#include <linux/suspend.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/pm_wakeirq.h>
#include <trace/events/power.h>
#include "power.h"
......@@ -238,6 +239,97 @@ int device_wakeup_enable(struct device *dev)
}
EXPORT_SYMBOL_GPL(device_wakeup_enable);
/**
* device_wakeup_attach_irq - Attach a wakeirq to a wakeup source
* @dev: Device to handle
* @wakeirq: Device specific wakeirq entry
*
* Attach a device wakeirq to the wakeup source so the device
* wake IRQ can be configured automatically for suspend and
* resume.
*/
int device_wakeup_attach_irq(struct device *dev,
struct wake_irq *wakeirq)
{
struct wakeup_source *ws;
int ret = 0;
spin_lock_irq(&dev->power.lock);
ws = dev->power.wakeup;
if (!ws) {
dev_err(dev, "forgot to call call device_init_wakeup?\n");
ret = -EINVAL;
goto unlock;
}
if (ws->wakeirq) {
ret = -EEXIST;
goto unlock;
}
ws->wakeirq = wakeirq;
unlock:
spin_unlock_irq(&dev->power.lock);
return ret;
}
/**
* device_wakeup_detach_irq - Detach a wakeirq from a wakeup source
* @dev: Device to handle
*
* Removes a device wakeirq from the wakeup source.
*/
void device_wakeup_detach_irq(struct device *dev)
{
struct wakeup_source *ws;
spin_lock_irq(&dev->power.lock);
ws = dev->power.wakeup;
if (!ws)
goto unlock;
ws->wakeirq = NULL;
unlock:
spin_unlock_irq(&dev->power.lock);
}
/**
* device_wakeup_arm_wake_irqs(void)
*
* Itereates over the list of device wakeirqs to arm them.
*/
void device_wakeup_arm_wake_irqs(void)
{
struct wakeup_source *ws;
rcu_read_lock();
list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
if (ws->wakeirq)
dev_pm_arm_wake_irq(ws->wakeirq);
}
rcu_read_unlock();
}
/**
* device_wakeup_disarm_wake_irqs(void)
*
* Itereates over the list of device wakeirqs to disarm them.
*/
void device_wakeup_disarm_wake_irqs(void)
{
struct wakeup_source *ws;
rcu_read_lock();
list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
if (ws->wakeirq)
dev_pm_disarm_wake_irq(ws->wakeirq);
}
rcu_read_unlock();
}
/**
* device_wakeup_detach - Detach a device's wakeup source object from it.
* @dev: Device to detach the wakeup source object from.
......
......@@ -529,6 +529,7 @@ enum rpm_request {
};
struct wakeup_source;
struct wake_irq;
struct pm_domain_data;
struct pm_subsys_data {
......@@ -568,6 +569,7 @@ struct dev_pm_info {
unsigned long timer_expires;
struct work_struct work;
wait_queue_head_t wait_queue;
struct wake_irq *wakeirq;
atomic_t usage_count;
atomic_t child_count;
unsigned int disable_depth:3;
......
/*
* pm_wakeirq.h - Device wakeirq helper functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _LINUX_PM_WAKEIRQ_H
#define _LINUX_PM_WAKEIRQ_H
#ifdef CONFIG_PM
extern int dev_pm_set_wake_irq(struct device *dev, int irq);
extern int dev_pm_set_dedicated_wake_irq(struct device *dev,
int irq);
extern void dev_pm_clear_wake_irq(struct device *dev);
extern void dev_pm_enable_wake_irq(struct device *dev);
extern void dev_pm_disable_wake_irq(struct device *dev);
#else /* !CONFIG_PM */
static inline int dev_pm_set_wake_irq(struct device *dev, int irq)
{
return 0;
}
static inline int dev_pm_set_dedicated__wake_irq(struct device *dev,
int irq)
{
return 0;
}
static inline void dev_pm_clear_wake_irq(struct device *dev)
{
}
static inline void dev_pm_enable_wake_irq(struct device *dev)
{
}
static inline void dev_pm_disable_wake_irq(struct device *dev)
{
}
#endif /* CONFIG_PM */
#endif /* _LINUX_PM_WAKEIRQ_H */
......@@ -28,9 +28,17 @@
#include <linux/types.h>
struct wake_irq;
/**
* struct wakeup_source - Representation of wakeup sources
*
* @name: Name of the wakeup source
* @entry: Wakeup source list entry
* @lock: Wakeup source lock
* @wakeirq: Optional device specific wakeirq
* @timer: Wakeup timer list
* @timer_expires: Wakeup timer expiration
* @total_time: Total time this wakeup source has been active.
* @max_time: Maximum time this wakeup source has been continuously active.
* @last_time: Monotonic clock when the wakeup source's was touched last time.
......@@ -47,6 +55,7 @@ struct wakeup_source {
const char *name;
struct list_head entry;
spinlock_t lock;
struct wake_irq *wakeirq;
struct timer_list timer;
unsigned long timer_expires;
ktime_t total_time;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment