ARM: pxa: remove pxa95x support

PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

The assumption is that nobody will miss this support. If you are
reading this text because you actually require pxa95x support on
a new kernel, we can work out a way to revert this patch or add
support to the mmp platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -1154,7 +1154,7 @@ config ARM_NR_BANKS
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.

arch/arm/mach-pxa/Kconfig

@@ -2,27 +2,6 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-config ARCH_PXA_V7
-	bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
-	bool "PXA95x Development Platform (aka TavorEVB III)"
-	select CPU_PXA955
-
-config MACH_SAARB
-	bool "PXA955 Handheld Platform (aka SAARB)"
-	select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
-	def_bool y
-	depends on ARCH_PXA_V7
-	depends on !MACH_SAARB
-	select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA3XX_DT
@@ -630,7 +609,6 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select HAVE_PWM
 	select PXA27x
-endif
 endmenu
 
 config PXA25x
@@ -688,18 +666,6 @@ config CPU_PXA935
 	help
 	  PXA935 (codename Tavor-P65)
 
-config PXA95x
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to PXA95x variants
-
-config CPU_PXA955
-	bool
-	select PXA95x
-	help
-	  PXA950 (codename MG1)
-
 config PXA_SHARP_C7xx
 	bool
 	select SHARPSL_PM

arch/arm/mach-pxa/Makefile

@@ -19,7 +19,6 @@ endif
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
-obj-$(CONFIG_MACH_SAARB)	+= saarb.o
 
 # 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o

arch/arm/mach-pxa/clock.h

@@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk);
 
 extern struct syscore_ops pxa2xx_clock_syscore_ops;
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
 #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
 		.ops	= &clk_pxa3xx_cken_ops,		\

arch/arm/mach-pxa/devices.c

@@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 }
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 static struct resource pxa27x_resource_keypad[] = {
 	[0] = {
 		.start	= 0x41500000,
@@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = {
 	.resource	= pxa27x_resource_pwm1,
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
 };
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #ifdef CONFIG_PXA3xx
 static struct resource pxa3xx_resources_mci2[] = {
@@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = {
 
 #endif /* CONFIG_PXA3xx */
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
 static struct resource pxa3xx_resources_i2c_power[] = {
 	{
 		.start  = 0x40f500c0,
@@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = {
 	.resource	= pxa3xx_resource_ssp4,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
 };
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+#endif /* CONFIG_PXA3xx */
 
 struct resource pxa_resource_gpio[] = {
 	{

arch/arm/mach-pxa/include/mach/hardware.h

@@ -194,17 +194,6 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x581 || _id == 0xc08		\
-			|| _id == 0xb76;		\
-	})
-#else
-#define __cpu_is_pxa955(id)	(0)
-#endif
-
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -255,10 +244,6 @@
 		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa955()					\
-	({						\
-		__cpu_is_pxa955(read_cpuid_id());	\
-	})
 
 
 /*
@@ -297,15 +282,6 @@
 #define __cpu_is_pxa93x(id)	(0)
 #endif
 
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id)				\
-	({						\
-		__cpu_is_pxa955(id);			\
-	})
-#else
-#define __cpu_is_pxa95x(id)	(0)
-#endif
-
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -321,10 +297,6 @@
 		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa95x()					\
-	({						\
-		__cpu_is_pxa95x(read_cpuid_id());	\
-	})
 
 /*
  * return current memory and LCD clock frequency in units of 10kHz

arch/arm/mach-pxa/include/mach/irqs.h

@@ -84,7 +84,6 @@
 #define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
 #define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
 #define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
 #define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
 
 #define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)

arch/arm/mach-pxa/include/mach/pxa3xx.h

@@ -7,7 +7,6 @@
 
 extern void __init pxa3xx_map_io(void);
 extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
 
 #define pxa3xx_handle_irq	ichp_handle_irq
 

arch/arm/mach-pxa/include/mach/pxa95x.h

-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */

arch/arm/mach-pxa/pxa95x.c

-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
-	pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
-	int ret = 0, i;
-
-	if (cpu_is_pxa95x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa95x_mfp_addr_map);
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa95x_init);

arch/arm/mach-pxa/saarb.c

-/*
- *  linux/arch/arm/mach-pxa/saarb.c
- *
- *  Support for the Marvell Handheld Platform (aka SAARB)
- *
- *  Copyright (C) 2007-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
-	.touch		= &saarb_touch,
-	.backlight	= &saarb_backlight[0],
-	.led		= &saarb_led[0],
-	.companion_addr	= 0x10,
-	.irq_mode	= 0,
-	.irq_base	= IRQ_BOARD_START,
-
-	.i2c_port	= GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &saarb_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saarb_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= SAARB_NR_IRQS,
-	.init_irq       = pxa95x_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saarb_init,
-	.restart	= pxa_restart,
-MACHINE_END
-

arch/arm/mach-pxa/tavorevb3.c

-/*
- *  linux/arch/arm/mach-pxa/tavorevb3.c
- *
- *  Support for the Marvell EVB3 Development Platform.
- *
- *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
-	/* UART */
-	GPIO53_UART1_TXD,
-	GPIO54_UART1_RXD,
-
-	/* PMIC */
-	PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
-	.touch				= &evb3_touch,
-	.backlight			= &evb3_backlight[0],
-	.led				= &evb3_led[0],
-	.companion_addr			= 0x10,
-	.irq_mode			= 0,
-	.irq_base			= IRQ_BOARD_START,
-
-	.i2c_port			= GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &evb3_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init evb3_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-
-	evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.atag_offset	= 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= TAVOREVB3_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = evb3_init,
-	.restart	= pxa_restart,
-MACHINE_END

arch/arm/plat-pxa/Makefile

@@ -5,7 +5,6 @@
 obj-y	:= dma.o
 
 obj-$(CONFIG_PXA3xx)		+= mfp.o
-obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
 obj-$(CONFIG_PXA_SSP)		+= ssp.o

arch/arm/plat-pxa/include/plat/mfp.h

@@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t;
 	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
 	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
 /*
  * each MFP pin will have a MFPR register, since the offset of the
  * register varies between processors, the processor specific code
@@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val);
 void mfp_config(unsigned long *mfp_cfgs, int num);
 void mfp_config_run(void);
 void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
 
 #endif /* __ASM_PLAT_MFP_H */

drivers/gpio/gpio-pxa.c

@@ -448,7 +448,7 @@ static int pxa_gpio_nums(void)
 	} else if (cpu_is_pxa27x()) {
 		count = 120;
 		gpio_type = PXA27X_GPIO;
-	} else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+	} else if (cpu_is_pxa93x()) {
 		count = 191;
 		gpio_type = PXA93X_GPIO;
 	} else if (cpu_is_pxa3xx()) {