Commit 4b7ab5fc authored by Animesh Manna's avatar Animesh Manna Committed by Daniel Vetter

drm/i915/skl: Added a check for the hardware status of csr fw before loading.

Dmc will restore the csr program except DC9, cold boot,
warm reset, PCI function level reset, and hibernate/suspend.

intel_csr_load_program() function is used to load the firmware
data from kernel memory to csr address space.

All values of csr address space will be zero if it got reset and
the first byte of csr program is always a non-zero if firmware
is loaded successfuly. Based on hardware status will load the
firmware.

Without this condition check if we overwrite the firmware data the
counters exposed for dc5/dc6 (help for debugging) will be nullified.

Note: Above commit message seems to be confused and the real problem
apparently going on is that for suspend-to-idle and system standby the
firmware survives (it's like runtime pm), but it doesn't for
suspend-to-mem and hibernate-to-disk. All the other talking about DC9
and pci reset are irrelevant for the path touched here (only driver
load and system resume functions) and might not be true statements.

v1: Initial version.

v2: Based on review comments from Daniel,
- Added a check to know hardware status and load the firmware if not loaded.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: default avatarAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: default avatarVathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: default avatarA.Sunil Kamath <sunil.kamath@intel.com>
[danvet: Explain clearly in the code comment when we need to reload
and when not and make it a FIXME. Also deconfuse the commit message
with a note. Also: Make. it. compile.]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 30c964a6
......@@ -265,6 +265,15 @@ void intel_csr_load_program(struct drm_device *dev)
return;
}
/*
* FIXME: Firmware gets lost on S3/S4, but not when entering system
* standby or suspend-to-idle (which is just like forced runtime pm).
* Unfortunately the ACPI subsystem doesn't yet give us a way to
* differentiate this, hence figure it out with this hack.
*/
if (I915_READ(CSR_PROGRAM(0)))
return;
mutex_lock(&dev_priv->csr_lock);
fw_size = dev_priv->csr.dmc_fw_size;
for (i = 0; i < fw_size; i++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment