Commit 4bc7f170 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

usb.h #include dependancies and whitespace cleanup

parent 279f149e
......@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#ifdef CONFIG_USB_DEBUG
#define DEBUG
#else
......
#ifndef __LINUX_USB_H
#define __LINUX_USB_H
#include <linux/device.h>
#include <linux/errno.h>
/* USB constants */
/*
......@@ -19,8 +16,8 @@
#define USB_CLASS_MASS_STORAGE 8
#define USB_CLASS_HUB 9
#define USB_CLASS_CDC_DATA 0x0a
#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
......@@ -63,23 +60,23 @@
/*
* USB Packet IDs (PIDs)
*/
#define USB_PID_UNDEF_0 0xf0
#define USB_PID_OUT 0xe1
#define USB_PID_ACK 0xd2
#define USB_PID_DATA0 0xc3
#define USB_PID_PING 0xb4 /* USB 2.0 */
#define USB_PID_SOF 0xa5
#define USB_PID_NYET 0x96 /* USB 2.0 */
#define USB_PID_DATA2 0x87 /* USB 2.0 */
#define USB_PID_SPLIT 0x78 /* USB 2.0 */
#define USB_PID_IN 0x69
#define USB_PID_NAK 0x5a
#define USB_PID_DATA1 0x4b
#define USB_PID_PREAMBLE 0x3c /* Token mode */
#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
#define USB_PID_SETUP 0x2d
#define USB_PID_STALL 0x1e
#define USB_PID_MDATA 0x0f /* USB 2.0 */
#define USB_PID_UNDEF_0 0xf0
#define USB_PID_OUT 0xe1
#define USB_PID_ACK 0xd2
#define USB_PID_DATA0 0xc3
#define USB_PID_PING 0xb4 /* USB 2.0 */
#define USB_PID_SOF 0xa5
#define USB_PID_NYET 0x96 /* USB 2.0 */
#define USB_PID_DATA2 0x87 /* USB 2.0 */
#define USB_PID_SPLIT 0x78 /* USB 2.0 */
#define USB_PID_IN 0x69
#define USB_PID_NAK 0x5a
#define USB_PID_DATA1 0x4b
#define USB_PID_PREAMBLE 0x3c /* Token mode */
#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
#define USB_PID_SETUP 0x2d
#define USB_PID_STALL 0x1e
#define USB_PID_MDATA 0x0f /* USB 2.0 */
/*
* Standard requests
......@@ -96,19 +93,17 @@
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_MAJOR 180
#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/version.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h> /* for in_interrupt() */
#include <linux/config.h>
#include <linux/list.h>
#include <linux/delay.h> /* for mdelay() */
#include <linux/interrupt.h> /* for in_interrupt() */
#include <linux/list.h> /* for struct list_head */
#include <linux/device.h> /* for struct device */
#define USB_MAJOR 180
static __inline__ void wait_ms(unsigned int ms)
{
......@@ -184,11 +179,11 @@ struct usb_device;
#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
/* most of these maximums are arbitrary */
#define USB_MAXCONFIG 8
#define USB_ALTSETTINGALLOC 4
#define USB_MAXALTSETTING 128 /* Hard limit */
#define USB_MAXINTERFACES 32
#define USB_MAXENDPOINTS 32 /* Hard limit */
#define USB_MAXCONFIG 8
#define USB_ALTSETTINGALLOC 4
#define USB_MAXALTSETTING 128 /* Hard limit */
#define USB_MAXINTERFACES 32
#define USB_MAXENDPOINTS 32 /* Hard limit */
/* All standard descriptors have these 2 fields in common */
struct usb_descriptor_header {
......@@ -226,7 +221,7 @@ struct usb_endpoint_descriptor {
__u8 bSynchAddress __attribute__ ((packed));
/* the rest is internal to the Linux implementation */
unsigned char *extra; /* Extra descriptors */
unsigned char *extra; /* Extra descriptors */
int extralen;
};
......@@ -243,9 +238,9 @@ struct usb_interface_descriptor {
__u8 iInterface __attribute__ ((packed));
/* the rest is internal to the Linux implementation */
struct usb_endpoint_descriptor *endpoint;
struct usb_endpoint_descriptor *endpoint;
unsigned char *extra; /* Extra descriptors */
unsigned char *extra; /* Extra descriptors */
int extralen;
};
......@@ -254,7 +249,7 @@ struct usb_interface {
int act_altsetting; /* active alternate setting */
int num_altsetting; /* number of alternate settings */
int max_altsetting; /* total memory allocated */
int max_altsetting; /* total memory allocated */
struct usb_driver *driver; /* driver */
struct device dev; /* interface specific device info */
......@@ -281,7 +276,7 @@ struct usb_config_descriptor {
/* the rest is internal to the Linux implementation */
struct usb_interface *interface;
unsigned char *extra; /* Extra descriptors */
unsigned char *extra; /* Extra descriptors */
int extralen;
};
......@@ -334,12 +329,12 @@ struct usb_bus {
char *bus_name; /* stable id (PCI slot_name etc) */
#ifdef DEVNUM_ROUND_ROBIN
int devnum_next; /* Next open device number in round-robin allocation */
int devnum_next; /* Next open device number in round-robin allocation */
#endif /* DEVNUM_ROUND_ROBIN */
struct usb_devmap devmap; /* device address allocation map */
struct usb_operations *op; /* Operations (specific to the HC) */
struct usb_device *root_hub; /* Root hub */
struct usb_devmap devmap; /* device address allocation map */
struct usb_operations *op; /* Operations (specific to the HC) */
struct usb_device *root_hub; /* Root hub */
struct list_head bus_list; /* list of busses */
void *hcpriv; /* Host Controller private data */
......@@ -408,7 +403,7 @@ struct usb_device {
int have_langid; /* whether string_langid is valid yet */
int string_langid; /* language ID for strings */
void *hcpriv; /* Host Controller private data */
struct list_head filelist;
......@@ -467,7 +462,7 @@ const struct usb_device_id *usb_match_id(struct usb_device *dev,
* in host controller driver modules, does not change these path identifers;
* neither does rebooting or re-enumerating. These are more useful identifiers
* than changeable ("unstable") ones like bus numbers or device addresses.
*
*
* With a partial exception for devices connected to USB 2.0 root hubs, these
* identifiers are also predictable: so long as the device tree isn't changed,
* plugging any USB device into a given hub port always gives it the same path.
......@@ -492,7 +487,7 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size)
* The third probe() parameter will point to a matching entry from this
* table. (Null value reserved.) Use the driver_data field for each
* match to hold information tied to that match: device quirks, etc.
*
*
* Terminate the driver's table with an all-zeroes entry.
* Use the flag values to control which fields are compared.
*/
......@@ -743,12 +738,12 @@ extern void usb_deregister_dev(struct usb_driver *driver, int num_minors, int st
*
* FIXME should be URB_* flags
*/
#define USB_DISABLE_SPD 0x0001
#define USB_ISO_ASAP 0x0002
#define USB_ASYNC_UNLINK 0x0008
#define USB_QUEUE_BULK 0x0010
#define USB_DISABLE_SPD 0x0001
#define USB_ISO_ASAP 0x0002
#define USB_ASYNC_UNLINK 0x0008
#define USB_QUEUE_BULK 0x0010
#define USB_NO_FSBR 0x0020
#define USB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */
#define USB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
/* ... less overhead for QUEUE_BULK */
#define USB_TIMEOUT_KILLED 0x1000 /* only set by HCD! */
......@@ -914,12 +909,12 @@ struct urb
unsigned int transfer_flags; /* (in) USB_DISABLE_SPD | ...*/
void *transfer_buffer; /* (in) associated data buffer */
int transfer_buffer_length; /* (in) data buffer length */
int actual_length; /* (return) actual transfer length */
int actual_length; /* (return) actual transfer length */
int bandwidth; /* bandwidth for INT/ISO request */
unsigned char *setup_packet; /* (in) setup packet (control only) */
int start_frame; /* (modify) start frame (INT/ISO) */
int number_of_packets; /* (in) number of ISO packets */
int interval; /* (in) transfer interval (INT/ISO) */
int interval; /* (in) transfer interval (INT/ISO) */
int error_count; /* (return) number of ISO errors */
int timeout; /* (in) timeout, in jiffies */
void *context; /* (in) context for completion */
......@@ -980,7 +975,6 @@ static inline void usb_fill_bulk_urb (struct urb *urb,
int buffer_length,
usb_complete_t complete,
void *context)
{
spin_lock_init(&urb->lock);
urb->dev = dev;
......@@ -990,7 +984,7 @@ static inline void usb_fill_bulk_urb (struct urb *urb,
urb->complete = complete;
urb->context = context;
}
/**
* usb_fill_int_urb - macro to help initialize a interrupt urb
* @urb: pointer to the urb to initialize.
......@@ -1080,12 +1074,12 @@ extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
* they typically complete within a few frames (msec) after they're issued
*/
#ifdef CONFIG_USB_LONG_TIMEOUT
#define USB_CTRL_GET_TIMEOUT 4
#define USB_CTRL_GET_TIMEOUT 4
#else
#define USB_CTRL_GET_TIMEOUT 3
#define USB_CTRL_GET_TIMEOUT 3
#endif
#define USB_CTRL_SET_TIMEOUT 3
#define USB_CTRL_SET_TIMEOUT 3
/* -------------------------------------------------------------------------- */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment