ARM: Convert to GENERIC_IRQ_MULTI_HANDLER

Converts the ARM interrupt code to use the recently added
GENERIC_IRQ_MULTI_HANDLER, which is essentially just a copy of ARM's
existhing MULTI_IRQ_HANDLER.  The only changes are:

* handle_arch_irq is now defined in a generic C file instead of an
  arm-specific assembly file.
 
* handle_arch_irq is now marked as __ro_after_init.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux@armlinux.org.uk
Cc: catalin.marinas@arm.com
Cc: Will Deacon <will.deacon@arm.com>
Cc: jonas@southpole.se
Cc: stefan.kristiansson@saunalahti.fi
Cc: shorne@gmail.com
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: nicolas.pitre@linaro.org
Cc: vladimir.murzin@arm.com
Cc: keescook@chromium.org
Cc: jinb.park7@gmail.com
Cc: yamada.masahiro@socionext.com
Cc: alexandre.belloni@bootlin.com
Cc: pombredanne@nexb.com
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: kstewart@linuxfoundation.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: ard.biesheuvel@linaro.org
Cc: james.morse@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: openrisc@lists.librecores.org
Link: https://lkml.kernel.org/r/20180622170126.6308-3-palmer@sifive.com

arch/arm/Kconfig

@@ -337,8 +337,8 @@ config ARCH_MULTIPLATFORM
 	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
@@ -465,9 +465,9 @@ config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
@@ -512,8 +512,8 @@ config ARCH_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -532,11 +532,11 @@ config ARCH_PXA
 	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select PLAT_PXA
 	select SPARSE_IRQ
 	help
@@ -572,11 +572,11 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -590,10 +590,10 @@ config ARCH_S3C24XX
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select GPIOLIB
+	select GENERIC_IRQ_MULTI_HANDLER
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H
 	select SAMSUNG_ATAGS
 	select USE_OF
@@ -627,10 +627,10 @@ config ARCH_OMAP1
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select NEED_MACH_IO_H if PCCARD
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
@@ -921,11 +921,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif

arch/arm/include/asm/irq.h

@@ -31,11 +31,6 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
-#endif
-
 #ifdef CONFIG_SMP
 extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
 					   bool exclude_self);

arch/arm/include/asm/mach/arch.h

@@ -59,7 +59,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
 	void			(*restart)(enum reboot_mode, const char *);

arch/arm/kernel/entry-armv.S

@@ -22,7 +22,7 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_MULTI_IRQ_HANDLER
+#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 #include <mach/entry-macro.S>
 #endif
 #include <asm/thread_notify.h>
@@ -39,7 +39,7 @@
  * Interrupt handling.
  */
 	.macro	irq_handler
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
 	badr	lr, 9997f
@@ -1226,9 +1226,3 @@ vector_addrexcptn:
 	.globl	cr_alignment
 cr_alignment:
 	.space	4
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.globl	handle_arch_irq
-handle_arch_irq:
-	.space	4
-#endif

arch/arm/kernel/irq.c

@@ -102,16 +102,6 @@ void __init init_IRQ(void)
 	uniphier_cache_init();
 }
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
-{
-	if (handle_arch_irq)
-		return;
-
-	handle_arch_irq = handle_irq;
-}
-#endif
-
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {

arch/arm/kernel/setup.c

@@ -1145,7 +1145,7 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_crashkernel();
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif