Merge tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - Add battery internal resistance temperature table support

  Drivers:
   - sc27xx: Optimize the battery resistance with measuring temperature
   - max17042-battery: Add MAX17055 support
   - bq25890-charger: Add support of BQ25892 and BQ25896 chips
   - misc fixes"

* tag 'for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (44 commits)
  power: supply: ipaq_micro_battery: remove unneeded semicolon
  power: supply: bq25890_charger: fix incorrect error return when bq25890_field_read fails
  power: supply: axp20x_usb_power: Only poll while offline
  power: supply: axp20x_usb_power: Add wakeup control
  power: supply: axp20x_usb_power: Allow offlining
  power: supply: axp20x_usb_power: Use a match structure
  power: suppy: ucs1002: Make the symbol 'ucs1002_regulator_enable' static
  power: reset: at91-poweroff: use proper master clock register offset
  power: reset: at91-poweroff: introduce struct shdwc_reg_config
  power: supply: bq25890_charger: Add DT and I2C ids for all supported chips
  dt-bindings: Add new chips to bq25890 binding documentation
  power: supply: bq25890_charger: Add support of BQ25892 and BQ25896 chips
  power: supply: core: Update sysfs-class-power ABI document
  power: supply: sbs-battery: Fix a signedness bug in sbs_get_battery_capacity()
  power: supply: ltc2941-battery-gauge: fix use-after-free
  power: supply: max17040: Correct IRQ wake handling
  power: supply: axp20x_usb_power: Remove unused device_node
  power: supply: axp20x_ac_power: Add wakeup control
  power: supply: axp20x_ac_power: Allow offlining
  power: supply: axp20x_ac_power: Fix reporting online status
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -189,7 +189,8 @@ Description:
 		Access: Read
 		Valid values: "Unknown", "Good", "Overheat", "Dead",
 			      "Over voltage", "Unspecified failure", "Cold",
-			      "Watchdog timer expire", "Safety timer expire"
+			      "Watchdog timer expire", "Safety timer expire",
+			      "Over current"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017

Documentation/devicetree/bindings/power/supply/battery.txt

@@ -35,6 +35,10 @@ Optional Properties:
    for each of the battery capacity lookup table. The first temperature value
    specifies the OCV table 0, and the second temperature value specifies the
    OCV table 1, and so on.
+ - resistance-temp-table: An array providing the temperature in degree Celsius
+   and corresponding battery internal resistance percent, which is used to look
+   up the resistance percent according to current temperature to get a accurate
+   batterty internal resistance in different temperatures.
 
 Battery properties are named, where possible, for the corresponding
 elements in enum power_supply_property, defined in
@@ -61,6 +65,7 @@ Example:
 		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
 		ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
 		ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
+		resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
 	};
 
 	charger: charger@11 {

Documentation/devicetree/bindings/power/supply/bq25890.txt

 Binding for TI bq25890 Li-Ion Charger
 
-This driver will support the bq25896 and the bq25890. There are other ICs
-in the same family but those have not been tested.
+This driver will support the bq25892, the bq25896 and the bq25890. There are
+other ICs in the same family but those have not been tested.
 
 Required properties:
 - compatible: Should contain one of the following:
     * "ti,bq25890"
+    * "ti,bq25892"
+    * "ti,bq25895"
+    * "ti,bq25896"
 - reg: integer, i2c address of the device.
 - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
 - ti,charge-current: integer, maximum charging current (in uA);

Documentation/devicetree/bindings/power/supply/max17040_battery.txt

+max17040_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17040" or "maxim,max77836-battery"
+ - reg: i2c slave address
+
+Optional properties :
+- maxim,alert-low-soc-level :	The alert threshold that sets the state of
+				charge level (%) where an interrupt is
+				generated. Can be configured from 1 up to 32
+				(%). If skipped the power up default value of
+				4 (%) will be used.
+- interrupts : 			Interrupt line see Documentation/devicetree/
+				bindings/interrupt-controller/interrupts.txt
+- wakeup-source :		This device has wakeup capabilities. Use this
+				property to use alert low SOC level interrupt
+				as wake up source.
+
+Optional properties support interrupt functionality for alert low state of
+charge level, present in some ICs in the same family, and should be used with
+compatible "maxim,max77836-battery".
+
+Example:
+
+	battery-fuel-gauge@36 {
+		compatible = "maxim,max77836-battery";
+		reg = <0x36>;
+		maxim,alert-low-soc-level = <10>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};

Documentation/devicetree/bindings/power/supply/max17042_battery.txt

@@ -2,7 +2,11 @@ max17042_battery
 ~~~~~~~~~~~~~~~~
 
 Required properties :
- - compatible : "maxim,max17042"
+ - compatible : one of the following
+ * "maxim,max17042"
+ * "maxim,max17047"
+ * "maxim,max17050"
+ * "maxim,max17055"
 
 Optional properties :
  - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms

Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt

@@ -13,6 +13,8 @@ Required properties:
 - io-channel-names: Should be "bat-temp" or "charge-vol".
 - nvmem-cells: A phandle to the calibration cells provided by eFuse device.
 - nvmem-cell-names: Should be "fgu_calib".
+- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter
+  chip in micro Ohms.
 - monitored-battery: Phandle of battery characteristics devicetree node.
   See Documentation/devicetree/bindings/power/supply/battery.txt
 
@@ -52,5 +54,6 @@ Example:
 			nvmem-cells = <&fgu_calib>;
 			nvmem-cell-names = "fgu_calib";
 			monitored-battery = <&bat>;
+			sprd,calib-resistance-micro-ohms = <21500>;
 		};
 	};

drivers/power/reset/Kconfig

@@ -141,14 +141,14 @@ config POWER_RESET_LTC2952
 	  down via the LTC2952. Bindings are made in the device tree.
 
 config POWER_RESET_MT6323
-       bool "MediaTek MT6323 power-off driver"
-       depends on MFD_MT6397
-       help
-         The power-off driver is responsible for externally shutdown down
-         the power of a remote MediaTek SoC MT6323 is connected to through
-         controlling a tiny circuit BBPU inside MT6323 RTC.
-
-         Say Y if you have a board where MT6323 could be found.
+	bool "MediaTek MT6323 power-off driver"
+	depends on MFD_MT6397
+	help
+	  The power-off driver is responsible for externally shutdown down
+	  the power of a remote MediaTek SoC MT6323 is connected to through
+	  controlling a tiny circuit BBPU inside MT6323 RTC.
+
+	  Say Y if you have a board where MT6323 could be found.
 
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -66,7 +66,7 @@
 
 #define SHDW_CFG_NOT_USED	(32)
 
-struct shdwc_config {
+struct shdwc_reg_config {
 	u8 wkup_pin_input;
 	u8 mr_rtcwk_shift;
 	u8 mr_rttwk_shift;
@@ -74,8 +74,17 @@ struct shdwc_config {
 	u8 sr_rttwk_shift;
 };
 
+struct pmc_reg_config {
+	u8 mckr;
+};
+
+struct reg_config {
+	struct shdwc_reg_config shdwc;
+	struct pmc_reg_config pmc;
+};
+
 struct shdwc {
-	const struct shdwc_config *cfg;
+	const struct reg_config *rcfg;
 	struct clk *sclk;
 	void __iomem *shdwc_base;
 	void __iomem *mpddrc_base;
@@ -95,6 +104,7 @@ static const unsigned long long sdwc_dbc_period[] = {
 static void __init at91_wakeup_status(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	u32 reg;
 	char *reason = "unknown";
 
@@ -106,11 +116,11 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
 	if (!reg)
 		return;
 
-	if (SHDW_WK_PIN(reg, shdw->cfg))
+	if (SHDW_WK_PIN(reg, &rcfg->shdwc))
 		reason = "WKUP pin";
-	else if (SHDW_RTCWK(reg, shdw->cfg))
+	else if (SHDW_RTCWK(reg, &rcfg->shdwc))
 		reason = "RTC";
-	else if (SHDW_RTTWK(reg, shdw->cfg))
+	else if (SHDW_RTTWK(reg, &rcfg->shdwc))
 		reason = "RTT";
 
 	pr_info("AT91: Wake-Up source: %s\n", reason);
@@ -131,9 +141,9 @@ static void at91_poweroff(void)
 		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
 
 		/* Switch the master clock source to slow clock. */
-		"1:	ldr	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		"1:	ldr	r6, [%4, %5]\n\t"
 		"	bic	r6, r6,  #" __stringify(AT91_PMC_CSS) "\n\t"
-		"	str	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		"	str	r6, [%4, %5]\n\t"
 		/* Wait for clock switch. */
 		"2:	ldr	r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
 		"	tst	r6, #"	    __stringify(AT91_PMC_MCKRDY) "\n\t"
@@ -148,7 +158,8 @@ static void at91_poweroff(void)
 		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
 		  "r" (at91_shdwc->shdwc_base),
 		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
-		  "r" (at91_shdwc->pmc_base)
+		  "r" (at91_shdwc->pmc_base),
+		  "r" (at91_shdwc->rcfg->pmc.mckr)
 		: "r6");
 }
 
@@ -215,6 +226,7 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
 static void at91_shdwc_dt_configure(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	struct device_node *np = pdev->dev.of_node;
 	u32 mode = 0, tmp, input;
 
@@ -227,10 +239,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 		mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
-		mode |= SHDW_RTCWKEN(shdw->cfg);
+		mode |= SHDW_RTCWKEN(&rcfg->shdwc);
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
-		mode |= SHDW_RTTWKEN(shdw->cfg);
+		mode |= SHDW_RTTWKEN(&rcfg->shdwc);
 
 	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
 	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
@@ -239,30 +251,40 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 	writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
 }
 
-static const struct shdwc_config sama5d2_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+static const struct reg_config sama5d2_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+	},
+	.pmc = {
+		.mckr		= 0x30,
+	},
 };
 
-static const struct shdwc_config sam9x60_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift = 16,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = 4,
+static const struct reg_config sam9x60_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
+	.pmc = {
+		.mckr		= 0x28,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "atmel,sama5d2-shdwc",
-		.data = &sama5d2_shdwc_config,
+		.data = &sama5d2_reg_config,
 	},
 	{
 		.compatible = "microchip,sam9x60-shdwc",
-		.data = &sam9x60_shdwc_config,
+		.data = &sam9x60_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -303,7 +325,7 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
-	at91_shdwc->cfg = match->data;
+	at91_shdwc->rcfg = match->data;
 
 	at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(at91_shdwc->sclk))

drivers/power/reset/gpio-restart.c

@@ -64,9 +64,11 @@ static int gpio_restart_probe(struct platform_device *pdev)
 
 	gpio_restart->reset_gpio = devm_gpiod_get(&pdev->dev, NULL,
 			open_source ? GPIOD_IN : GPIOD_OUT_LOW);
-	if (IS_ERR(gpio_restart->reset_gpio)) {
-		dev_err(&pdev->dev, "Could not get reset GPIO\n");
-		return PTR_ERR(gpio_restart->reset_gpio);
+	ret = PTR_ERR_OR_ZERO(gpio_restart->reset_gpio);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get reset GPIO\n");
+		return ret;
 	}
 
 	gpio_restart->restart_handler.notifier_call = gpio_restart_notify;

drivers/power/supply/Kconfig

@@ -73,10 +73,10 @@ config WM831X_POWER
 	  provided by Wolfson Microelectronics WM831x PMICs.
 
 config WM8350_POWER
-        tristate "WM8350 PMU support"
-        depends on MFD_WM8350
-        help
-          Say Y here to enable support for the power management unit
+	tristate "WM8350 PMU support"
+	depends on MFD_WM8350
+	help
+	  Say Y here to enable support for the power management unit
 	  provided by the Wolfson Microelectronics WM8350 PMIC.
 
 config TEST_POWER
@@ -209,16 +209,16 @@ config BATTERY_WM97XX
 	  Say Y to enable support for battery measured by WM97xx aux port.
 
 config BATTERY_SBS
-        tristate "SBS Compliant gas gauge"
-        depends on I2C
-        help
+	tristate "SBS Compliant gas gauge"
+	depends on I2C
+	help
 	  Say Y to include support for SBS battery driver for SBS-compliant
 	  gas gauges.
 
 config CHARGER_SBS
-        tristate "SBS Compliant charger"
-        depends on I2C
-        help
+	tristate "SBS Compliant charger"
+	depends on I2C
+	help
 	  Say Y to include support for SBS compliant battery chargers.
 
 config MANAGER_SBS
@@ -484,11 +484,11 @@ config CHARGER_MANAGER
 	depends on REGULATOR
 	select EXTCON
 	help
-          Say Y to enable charger-manager support, which allows multiple
-          chargers attached to a battery and multiple batteries attached to a
-          system. The charger-manager also can monitor charging status in
-          runtime and in suspend-to-RAM by waking up the system periodically
-          with help of suspend_again support.
+	  Say Y to enable charger-manager support, which allows multiple
+	  chargers attached to a battery and multiple batteries attached to a
+	  system. The charger-manager also can monitor charging status in
+	  runtime and in suspend-to-RAM by waking up the system periodically
+	  with help of suspend_again support.
 
 config CHARGER_LT3651
 	tristate "Analog Devices LT3651 charger"

drivers/power/supply/ab8500_charger.c

@@ -789,7 +789,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
 		ret = -ENXIO;
 		break;
-	};
+	}
 
 	di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
 	dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
@@ -1079,7 +1079,7 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
 		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
 		ret = -EPERM;
 		break;
-	};
+	}
 	di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
 	return ret;
 }
@@ -2427,7 +2427,7 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
 
 	default:
 		break;
-	};
+	}
 }
 
 /**

drivers/power/supply/ab8500_fg.c

@@ -2221,10 +2221,10 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
 						ab8500_fg_update_cap_scalers(di);
 					queue_work(di->fg_wq, &di->fg_work);
 					break;
-				};
+				}
 			default:
 				break;
-			};
+			}
 			break;
 		case POWER_SUPPLY_PROP_TECHNOLOGY:
 			switch (ext->desc->type) {
@@ -2331,7 +2331,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		if (ret) {
 			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
 			goto out;
-		};
+		}
 
 		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 			AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
@@ -2339,7 +2339,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		if (ret) {
 			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
 			goto out;
-		};
+		}
 
 		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 			AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
@@ -2347,7 +2347,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		if (ret) {
 			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
 			goto out;
-		};
+		}
 
 		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 			AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
@@ -2355,7 +2355,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		if (ret) {
 			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
 			goto out;
-		};
+		}
 
 		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 			AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
@@ -2363,7 +2363,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		if (ret) {
 			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
 			goto out;
-		};
+		}
 	}
 out:
 	return ret;

drivers/power/supply/abx500_chargalg.c

@@ -1823,7 +1823,7 @@ static ssize_t abx500_chargalg_en_store(struct abx500_chargalg *di,
 			"Enter 0. Disable AC/USB Charging\n"
 			"1. Enable AC charging\n"
 			"2. Enable USB Charging\n");
-	};
+	}
 	return strlen(buf);
 }
 

drivers/power/supply/axp20x_ac_power.c

@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -23,6 +24,9 @@
 #define AXP20X_PWR_STATUS_ACIN_PRESENT	BIT(7)
 #define AXP20X_PWR_STATUS_ACIN_AVAIL	BIT(6)
 
+#define AXP813_ACIN_PATH_SEL		BIT(7)
+#define AXP813_ACIN_PATH_SEL_TO_BIT(x)	(!!(x) << 7)
+
 #define AXP813_VHOLD_MASK		GENMASK(5, 3)
 #define AXP813_VHOLD_UV_TO_BIT(x)	((((x) / 100000) - 40) << 3)
 #define AXP813_VHOLD_REG_TO_UV(x)	\
@@ -40,6 +44,9 @@ struct axp20x_ac_power {
 	struct power_supply *supply;
 	struct iio_channel *acin_v;
 	struct iio_channel *acin_i;
+	bool has_acin_path_sel;
+	unsigned int num_irqs;
+	unsigned int irqs[];
 };
 
 static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
@@ -86,6 +93,17 @@ static int axp20x_ac_power_get_property(struct power_supply *psy,
 			return ret;
 
 		val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
+
+		/* ACIN_PATH_SEL disables ACIN even if ACIN_AVAIL is set. */
+		if (val->intval && power->has_acin_path_sel) {
+			ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  &reg);
+			if (ret)
+				return ret;
+
+			val->intval = !!(reg & AXP813_ACIN_PATH_SEL);
+		}
+
 		return 0;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
@@ -143,6 +161,11 @@ static int axp813_ac_power_set_property(struct power_supply *psy,
 	struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
 
 	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  AXP813_ACIN_PATH_SEL,
+					  AXP813_ACIN_PATH_SEL_TO_BIT(val->intval));
+
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
 		if (val->intval < 4000000 || val->intval > 4700000)
 			return -EINVAL;
@@ -169,7 +192,8 @@ static int axp813_ac_power_set_property(struct power_supply *psy,
 static int axp813_ac_power_prop_writeable(struct power_supply *psy,
 					  enum power_supply_property psp)
 {
-	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+	return psp == POWER_SUPPLY_PROP_ONLINE ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
 	       psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT;
 }
 
@@ -221,34 +245,86 @@ static const struct power_supply_desc axp813_ac_power_desc = {
 	.set_property = axp813_ac_power_set_property,
 };
 
+static const char * const axp20x_irq_names[] = {
+	"ACIN_PLUGIN",
+	"ACIN_REMOVAL",
+};
+
 struct axp_data {
 	const struct power_supply_desc	*power_desc;
+	const char * const		*irq_names;
+	unsigned int			num_irq_names;
 	bool				acin_adc;
+	bool				acin_path_sel;
 };
 
 static const struct axp_data axp20x_data = {
-	.power_desc = &axp20x_ac_power_desc,
-	.acin_adc = true,
+	.power_desc	= &axp20x_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= true,
+	.acin_path_sel	= false,
 };
 
 static const struct axp_data axp22x_data = {
-	.power_desc = &axp22x_ac_power_desc,
-	.acin_adc = false,
+	.power_desc	= &axp22x_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= false,
+	.acin_path_sel	= false,
 };
 
 static const struct axp_data axp813_data = {
-	.power_desc = &axp813_ac_power_desc,
-	.acin_adc = false,
+	.power_desc	= &axp813_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= false,
+	.acin_path_sel	= true,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int axp20x_ac_power_suspend(struct device *dev)
+{
+	struct axp20x_ac_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	/*
+	 * Allow wake via ACIN_PLUGIN only.
+	 *
+	 * As nested threaded IRQs are not automatically disabled during
+	 * suspend, we must explicitly disable the remainder of the IRQs.
+	 */
+	if (device_may_wakeup(&power->supply->dev))
+		enable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		disable_irq(power->irqs[i++]);
+
+	return 0;
+}
+
+static int axp20x_ac_power_resume(struct device *dev)
+{
+	struct axp20x_ac_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	if (device_may_wakeup(&power->supply->dev))
+		disable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		enable_irq(power->irqs[i++]);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(axp20x_ac_power_pm_ops, axp20x_ac_power_suspend,
+						 axp20x_ac_power_resume);
+
 static int axp20x_ac_power_probe(struct platform_device *pdev)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
 	struct power_supply_config psy_cfg = {};
 	struct axp20x_ac_power *power;
 	const struct axp_data *axp_data;
-	static const char * const irq_names[] = { "ACIN_PLUGIN", "ACIN_REMOVAL",
-		NULL };
 	int i, irq, ret;
 
 	if (!of_device_is_available(pdev->dev.of_node))
@@ -259,12 +335,14 @@ static int axp20x_ac_power_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
+	axp_data = of_device_get_match_data(&pdev->dev);
+
+	power = devm_kzalloc(&pdev->dev,
+			     struct_size(power, irqs, axp_data->num_irq_names),
+			     GFP_KERNEL);
 	if (!power)
 		return -ENOMEM;
 
-	axp_data = of_device_get_match_data(&pdev->dev);
-
 	if (axp_data->acin_adc) {
 		power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
 		if (IS_ERR(power->acin_v)) {
@@ -282,6 +360,8 @@ static int axp20x_ac_power_probe(struct platform_device *pdev)
 	}
 
 	power->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	power->has_acin_path_sel = axp_data->acin_path_sel;
+	power->num_irqs = axp_data->num_irq_names;
 
 	platform_set_drvdata(pdev, power);
 
@@ -295,20 +375,22 @@ static int axp20x_ac_power_probe(struct platform_device *pdev)
 		return PTR_ERR(power->supply);
 
 	/* Request irqs after registering, as irqs may trigger immediately */
-	for (i = 0; irq_names[i]; i++) {
-		irq = platform_get_irq_byname(pdev, irq_names[i]);
+	for (i = 0; i < axp_data->num_irq_names; i++) {
+		irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
 		if (irq < 0) {
-			dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
-				 irq_names[i], irq);
-			continue;
+			dev_err(&pdev->dev, "No IRQ for %s: %d\n",
+				axp_data->irq_names[i], irq);
+			return irq;
 		}
-		irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
-		ret = devm_request_any_context_irq(&pdev->dev, irq,
+		power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+		ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
 						   axp20x_ac_power_irq, 0,
 						   DRVNAME, power);
-		if (ret < 0)
-			dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
-				 irq_names[i], ret);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
+				axp_data->irq_names[i], ret);
+			return ret;
+		}
 	}
 
 	return 0;
@@ -331,8 +413,9 @@ MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
 static struct platform_driver axp20x_ac_power_driver = {
 	.probe = axp20x_ac_power_probe,
 	.driver = {
-		.name = DRVNAME,
-		.of_match_table = axp20x_ac_power_match,
+		.name		= DRVNAME,
+		.of_match_table	= axp20x_ac_power_match,
+		.pm		= &axp20x_ac_power_pm_ops,
 	},
 };
 

drivers/power/supply/bq25890_charger.c

@@ -25,12 +25,20 @@
 #define BQ25895_ID			7
 #define BQ25896_ID			0
 
+enum bq25890_chip_version {
+	BQ25890,
+	BQ25892,
+	BQ25895,
+	BQ25896,
+};
+
 enum bq25890_fields {
 	F_EN_HIZ, F_EN_ILIM, F_IILIM,				     /* Reg00 */
 	F_BHOT, F_BCOLD, F_VINDPM_OFS,				     /* Reg01 */
 	F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
 	F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN,	     /* Reg02 */
-	F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,    /* Reg03 */
+	F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,
+	F_MIN_VBAT_SEL,						     /* Reg03 */
 	F_PUMPX_EN, F_ICHG,					     /* Reg04 */
 	F_IPRECHG, F_ITERM,					     /* Reg05 */
 	F_VREG, F_BATLOWV, F_VRECHG,				     /* Reg06 */
@@ -39,8 +47,9 @@ enum bq25890_fields {
 	F_BATCMP, F_VCLAMP, F_TREG,				     /* Reg08 */
 	F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
 	F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN,	     /* Reg09 */
-	F_BOOSTV, F_BOOSTI,					     /* Reg0A */
-	F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_VSYS_STAT, /* Reg0B */
+	F_BOOSTV, F_PFM_OTG_DIS, F_BOOSTI,			     /* Reg0A */
+	F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_0B_RSVD,
+	F_VSYS_STAT,						     /* Reg0B */
 	F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
 	F_NTC_FAULT,						     /* Reg0C */
 	F_FORCE_VINDPM, F_VINDPM,				     /* Reg0D */
@@ -91,7 +100,7 @@ struct bq25890_device {
 	struct regmap *rmap;
 	struct regmap_field *rmap_fields[F_MAX_FIELDS];
 
-	int chip_id;
+	enum bq25890_chip_version chip_version;
 	struct bq25890_init_data init_data;
 	struct bq25890_state state;
 
@@ -111,8 +120,7 @@ static const struct regmap_access_table bq25890_writeable_regs = {
 static const struct regmap_range bq25890_volatile_reg_ranges[] = {
 	regmap_reg_range(0x00, 0x00),
 	regmap_reg_range(0x09, 0x09),
-	regmap_reg_range(0x0b, 0x0c),
-	regmap_reg_range(0x0e, 0x14),
+	regmap_reg_range(0x0b, 0x14),
 };
 
 static const struct regmap_access_table bq25890_volatile_regs = {
@@ -155,7 +163,7 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_OTG_CFG]		= REG_FIELD(0x03, 5, 5),
 	[F_CHG_CFG]		= REG_FIELD(0x03, 4, 4),
 	[F_SYSVMIN]		= REG_FIELD(0x03, 1, 3),
-	/* MIN_VBAT_SEL on BQ25896 */
+	[F_MIN_VBAT_SEL]	= REG_FIELD(0x03, 0, 0), // BQ25896 only
 	/* REG04 */
 	[F_PUMPX_EN]		= REG_FIELD(0x04, 7, 7),
 	[F_ICHG]		= REG_FIELD(0x04, 0, 6),
@@ -188,8 +196,8 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_PUMPX_DN]		= REG_FIELD(0x09, 0, 0),
 	/* REG0A */
 	[F_BOOSTV]		= REG_FIELD(0x0A, 4, 7),
-	/* PFM_OTG_DIS 3 on BQ25896 */
 	[F_BOOSTI]		= REG_FIELD(0x0A, 0, 2), // reserved on BQ25895
+	[F_PFM_OTG_DIS]		= REG_FIELD(0x0A, 3, 3), // BQ25896 only
 	/* REG0B */
 	[F_VBUS_STAT]		= REG_FIELD(0x0B, 5, 7),
 	[F_CHG_STAT]		= REG_FIELD(0x0B, 3, 4),
@@ -275,6 +283,7 @@ static const union {
 	struct bq25890_lookup lt;
 } bq25890_tables[] = {
 	/* range tables */
+	/* TODO: BQ25896 has max ICHG 3008 mA */
 	[TBL_ICHG] =	{ .rt = {0,	  5056000, 64000} },	 /* uA */
 	[TBL_ITERM] =	{ .rt = {64000,   1024000, 64000} },	 /* uA */
 	[TBL_VREG] =	{ .rt = {3840000, 4608000, 16000} },	 /* uV */
@@ -391,11 +400,13 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
 		break;
 
 	case POWER_SUPPLY_PROP_MODEL_NAME:
-		if (bq->chip_id == BQ25890_ID)
+		if (bq->chip_version == BQ25890)
 			val->strval = "BQ25890";
-		else if (bq->chip_id == BQ25895_ID)
+		else if (bq->chip_version == BQ25892)
+			val->strval = "BQ25892";
+		else if (bq->chip_version == BQ25895)
 			val->strval = "BQ25895";
-		else if (bq->chip_id == BQ25896_ID)
+		else if (bq->chip_version == BQ25896)
 			val->strval = "BQ25896";
 		else
 			val->strval = "UNKNOWN";
@@ -741,6 +752,56 @@ static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
 	return NOTIFY_OK;
 }
 
+static int bq25890_get_chip_version(struct bq25890_device *bq)
+{
+	int id, rev;
+
+	id = bq25890_field_read(bq, F_PN);
+	if (id < 0) {
+		dev_err(bq->dev, "Cannot read chip ID.\n");
+		return id;
+	}
+
+	rev = bq25890_field_read(bq, F_DEV_REV);
+	if (rev < 0) {
+		dev_err(bq->dev, "Cannot read chip revision.\n");
+		return rev;
+	}
+
+	switch (id) {
+	case BQ25890_ID:
+		bq->chip_version = BQ25890;
+		break;
+
+	/* BQ25892 and BQ25896 share same ID 0 */
+	case BQ25896_ID:
+		switch (rev) {
+		case 2:
+			bq->chip_version = BQ25896;
+			break;
+		case 1:
+			bq->chip_version = BQ25892;
+			break;
+		default:
+			dev_err(bq->dev,
+				"Unknown device revision %d, assume BQ25892\n",
+				rev);
+			bq->chip_version = BQ25892;
+		}
+		break;
+
+	case BQ25895_ID:
+		bq->chip_version = BQ25895;
+		break;
+
+	default:
+		dev_err(bq->dev, "Unknown chip ID %d\n", id);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int bq25890_irq_probe(struct bq25890_device *bq)
 {
 	struct gpio_desc *irq;
@@ -859,16 +920,10 @@ static int bq25890_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, bq);
 
-	bq->chip_id = bq25890_field_read(bq, F_PN);
-	if (bq->chip_id < 0) {
-		dev_err(dev, "Cannot read chip ID.\n");
-		return bq->chip_id;
-	}
-
-	if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25895_ID)
-			&& (bq->chip_id != BQ25896_ID)) {
-		dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
-		return -ENODEV;
+	ret = bq25890_get_chip_version(bq);
+	if (ret) {
+		dev_err(dev, "Cannot read chip ID or unknown chip.\n");
+		return ret;
 	}
 
 	if (!dev->platform_data) {
@@ -986,12 +1041,18 @@ static const struct dev_pm_ops bq25890_pm = {
 
 static const struct i2c_device_id bq25890_i2c_ids[] = {
 	{ "bq25890", 0 },
+	{ "bq25892", 0 },
+	{ "bq25895", 0 },
+	{ "bq25896", 0 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
 
 static const struct of_device_id bq25890_of_match[] = {
 	{ .compatible = "ti,bq25890", },
+	{ .compatible = "ti,bq25892", },
+	{ .compatible = "ti,bq25895", },
+	{ .compatible = "ti,bq25896", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq25890_of_match);

drivers/power/supply/cros_usbpd-charger.c

@@ -132,11 +132,8 @@ static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
 	ret = cros_usbpd_charger_ec_command(charger, 0,
 					    EC_CMD_CHARGE_PORT_COUNT,
 					    NULL, 0, &resp, sizeof(resp));
-	if (ret < 0) {
-		dev_err(charger->dev,
-			"Unable to get the number of ports (err:0x%x)\n", ret);
+	if (ret < 0)
 		return ret;
-	}
 
 	return resp.port_count;
 }
@@ -148,11 +145,8 @@ static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger)
 
 	ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
 					    NULL, 0, &resp, sizeof(resp));
-	if (ret < 0) {
-		dev_err(charger->dev,
-			"Unable to get the number or ports (err:0x%x)\n", ret);
+	if (ret < 0)
 		return ret;
-	}
 
 	return resp.num_ports;
 }

drivers/power/supply/ingenic-battery.c

@@ -100,10 +100,17 @@ static int ingenic_battery_set_scale(struct ingenic_battery *bat)
 		return -EINVAL;
 	}
 
-	return iio_write_channel_attribute(bat->channel,
-					   scale_raw[best_idx],
-					   scale_raw[best_idx + 1],
-					   IIO_CHAN_INFO_SCALE);
+	/* Only set scale if there is more than one (fractional) entry */
+	if (scale_len > 2) {
+		ret = iio_write_channel_attribute(bat->channel,
+						  scale_raw[best_idx],
+						  scale_raw[best_idx + 1],
+						  IIO_CHAN_INFO_SCALE);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static enum power_supply_property ingenic_battery_properties[] = {

drivers/power/supply/ipaq_micro_battery.c

@@ -149,7 +149,7 @@ static int micro_batt_get_property(struct power_supply *b,
 		default:
 			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
 			break;
-		};
+		}
 		break;
 	case POWER_SUPPLY_PROP_STATUS:
 		val->intval = get_status(b);
@@ -168,7 +168,7 @@ static int micro_batt_get_property(struct power_supply *b,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return 0;
 }
@@ -185,7 +185,7 @@ static int micro_ac_get_property(struct power_supply *b,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return 0;
 }

drivers/power/supply/ltc2941-battery-gauge.c

@@ -449,7 +449,7 @@ static int ltc294x_i2c_remove(struct i2c_client *client)
 {
 	struct ltc294x_info *info = i2c_get_clientdata(client);
 
-	cancel_delayed_work(&info->work);
+	cancel_delayed_work_sync(&info->work);
 	power_supply_unregister(info->supply);
 	return 0;
 }

drivers/power/supply/max17040_battery.c

@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/power_supply.h>
 #include <linux/max17040_battery.h>
 #include <linux/slab.h>
@@ -28,6 +29,9 @@
 #define MAX17040_DELAY		1000
 #define MAX17040_BATTERY_FULL	95
 
+#define MAX17040_ATHD_MASK		0xFFC0
+#define MAX17040_ATHD_DEFAULT_POWER_UP	4
+
 struct max17040_chip {
 	struct i2c_client		*client;
 	struct delayed_work		work;
@@ -42,6 +46,8 @@ struct max17040_chip {
 	int soc;
 	/* State Of Charge */
 	int status;
+	/* Low alert threshold from 32% to 1% of the State of Charge */
+	u32 low_soc_alert;
 };
 
 static int max17040_get_property(struct power_supply *psy,
@@ -98,6 +104,21 @@ static void max17040_reset(struct i2c_client *client)
 	max17040_write_reg(client, MAX17040_CMD, 0x0054);
 }
 
+static int max17040_set_low_soc_alert(struct i2c_client *client, u32 level)
+{
+	int ret;
+	u16 data;
+
+	level = 32 - level;
+	data = max17040_read_reg(client, MAX17040_RCOMP);
+	/* clear the alrt bit and set LSb 5 bits */
+	data &= MAX17040_ATHD_MASK;
+	data |= level;
+	ret = max17040_write_reg(client, MAX17040_RCOMP, data);
+
+	return ret;
+}
+
 static void max17040_get_vcell(struct i2c_client *client)
 {
 	struct max17040_chip *chip = i2c_get_clientdata(client);
@@ -160,21 +181,81 @@ static void max17040_get_status(struct i2c_client *client)
 		chip->status = POWER_SUPPLY_STATUS_FULL;
 }
 
+static int max17040_get_of_data(struct max17040_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+
+	chip->low_soc_alert = MAX17040_ATHD_DEFAULT_POWER_UP;
+	device_property_read_u32(dev,
+				 "maxim,alert-low-soc-level",
+				 &chip->low_soc_alert);
+
+	if (chip->low_soc_alert <= 0 || chip->low_soc_alert >= 33)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void max17040_check_changes(struct i2c_client *client)
+{
+	max17040_get_vcell(client);
+	max17040_get_soc(client);
+	max17040_get_online(client);
+	max17040_get_status(client);
+}
+
 static void max17040_work(struct work_struct *work)
 {
 	struct max17040_chip *chip;
+	int last_soc, last_status;
 
 	chip = container_of(work, struct max17040_chip, work.work);
 
-	max17040_get_vcell(chip->client);
-	max17040_get_soc(chip->client);
-	max17040_get_online(chip->client);
-	max17040_get_status(chip->client);
+	/* store SOC and status to check changes */
+	last_soc = chip->soc;
+	last_status = chip->status;
+	max17040_check_changes(chip->client);
+
+	/* check changes and send uevent */
+	if (last_soc != chip->soc || last_status != chip->status)
+		power_supply_changed(chip->battery);
 
 	queue_delayed_work(system_power_efficient_wq, &chip->work,
 			   MAX17040_DELAY);
 }
 
+static irqreturn_t max17040_thread_handler(int id, void *dev)
+{
+	struct max17040_chip *chip = dev;
+	struct i2c_client *client = chip->client;
+
+	dev_warn(&client->dev, "IRQ: Alert battery low level");
+	/* read registers */
+	max17040_check_changes(chip->client);
+
+	/* send uevent */
+	power_supply_changed(chip->battery);
+
+	/* reset alert bit */
+	max17040_set_low_soc_alert(client, chip->low_soc_alert);
+
+	return IRQ_HANDLED;
+}
+
+static int max17040_enable_alert_irq(struct max17040_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	unsigned int flags;
+	int ret;
+
+	flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					max17040_thread_handler, flags,
+					chip->battery->desc->name, chip);
+
+	return ret;
+}
+
 static enum power_supply_property max17040_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
@@ -196,6 +277,7 @@ static int max17040_probe(struct i2c_client *client,
 	struct i2c_adapter *adapter = client->adapter;
 	struct power_supply_config psy_cfg = {};
 	struct max17040_chip *chip;
+	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
 		return -EIO;
@@ -206,6 +288,12 @@ static int max17040_probe(struct i2c_client *client,
 
 	chip->client = client;
 	chip->pdata = client->dev.platform_data;
+	ret = max17040_get_of_data(chip);
+	if (ret) {
+		dev_err(&client->dev,
+			"failed: low SOC alert OF data out of bounds\n");
+		return ret;
+	}
 
 	i2c_set_clientdata(client, chip);
 	psy_cfg.drv_data = chip;
@@ -220,6 +308,24 @@ static int max17040_probe(struct i2c_client *client,
 	max17040_reset(client);
 	max17040_get_version(client);
 
+	/* check interrupt */
+	if (client->irq && of_device_is_compatible(client->dev.of_node,
+						   "maxim,max77836-battery")) {
+		ret = max17040_set_low_soc_alert(client, chip->low_soc_alert);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to set low SOC alert: err %d\n", ret);
+			return ret;
+		}
+
+		ret = max17040_enable_alert_irq(chip);
+		if (ret) {
+			client->irq = 0;
+			dev_warn(&client->dev,
+				 "Failed to get IRQ err %d\n", ret);
+		}
+	}
+
 	INIT_DEFERRABLE_WORK(&chip->work, max17040_work);
 	queue_delayed_work(system_power_efficient_wq, &chip->work,
 			   MAX17040_DELAY);
@@ -244,6 +350,10 @@ static int max17040_suspend(struct device *dev)
 	struct max17040_chip *chip = i2c_get_clientdata(client);
 
 	cancel_delayed_work(&chip->work);
+
+	if (client->irq && device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
 	return 0;
 }
 
@@ -254,6 +364,10 @@ static int max17040_resume(struct device *dev)
 
 	queue_delayed_work(system_power_efficient_wq, &chip->work,
 			   MAX17040_DELAY);
+
+	if (client->irq && device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
 	return 0;
 }
 

drivers/power/supply/max17042_battery.c

@@ -282,6 +282,8 @@ static int max17042_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
 			ret = regmap_read(map, MAX17042_V_empty, &data);
+		else if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+			ret = regmap_read(map, MAX17055_V_empty, &data);
 		else
 			ret = regmap_read(map, MAX17047_V_empty, &data);
 		if (ret < 0)
@@ -627,7 +629,8 @@ static void max17042_write_config_regs(struct max17042_chip *chip)
 			config->filter_cfg);
 	regmap_write(map, MAX17042_RelaxCFG, config->relax_cfg);
 	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047 ||
-			chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050)
+			chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050 ||
+			chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
 		regmap_write(map, MAX17047_FullSOCThr,
 						config->full_soc_thresh);
 }
@@ -758,6 +761,8 @@ static inline void max17042_override_por_values(struct max17042_chip *chip)
 
 	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
 		max17042_override_por(map, MAX17042_V_empty, config->vempty);
+	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+		max17042_override_por(map, MAX17055_V_empty, config->vempty);
 	else
 		max17042_override_por(map, MAX17047_V_empty, config->vempty);
 	max17042_override_por(map, MAX17042_TempNom, config->temp_nom);
@@ -765,7 +770,10 @@ static inline void max17042_override_por_values(struct max17042_chip *chip)
 	max17042_override_por(map, MAX17042_FCTC, config->fctc);
 	max17042_override_por(map, MAX17042_RCOMP0, config->rcomp0);
 	max17042_override_por(map, MAX17042_TempCo, config->tcompc0);
-	if (chip->chip_type) {
+	if (chip->chip_type &&
+	    ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050))) {
 		max17042_override_por(map, MAX17042_EmptyTempCo,
 						config->empty_tempco);
 		max17042_override_por(map, MAX17042_K_empty0,
@@ -929,7 +937,8 @@ max17042_get_default_pdata(struct max17042_chip *chip)
 	if (!pdata)
 		return pdata;
 
-	if (chip->chip_type != MAXIM_DEVICE_TYPE_MAX17042) {
+	if ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050)) {
 		pdata->init_data = max17047_default_pdata_init_regs;
 		pdata->num_init_data =
 			ARRAY_SIZE(max17047_default_pdata_init_regs);
@@ -1167,6 +1176,7 @@ static const struct of_device_id max17042_dt_match[] = {
 	{ .compatible = "maxim,max17042" },
 	{ .compatible = "maxim,max17047" },
 	{ .compatible = "maxim,max17050" },
+	{ .compatible = "maxim,max17055" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, max17042_dt_match);
@@ -1176,6 +1186,7 @@ static const struct i2c_device_id max17042_id[] = {
 	{ "max17042", MAXIM_DEVICE_TYPE_MAX17042 },
 	{ "max17047", MAXIM_DEVICE_TYPE_MAX17047 },
 	{ "max17050", MAXIM_DEVICE_TYPE_MAX17050 },
+	{ "max17055", MAXIM_DEVICE_TYPE_MAX17055 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max17042_id);

drivers/power/supply/max77650-charger.c

@@ -354,9 +354,16 @@ static int max77650_charger_remove(struct platform_device *pdev)
 	return max77650_charger_disable(chg);
 }
 
+static const struct of_device_id max77650_charger_of_match[] = {
+	{ .compatible = "maxim,max77650-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max77650_charger_of_match);
+
 static struct platform_driver max77650_charger_driver = {
 	.driver = {
 		.name = "max77650-charger",
+		.of_match_table = max77650_charger_of_match,
 	},
 	.probe = max77650_charger_probe,
 	.remove = max77650_charger_remove,

drivers/power/supply/pda_power.c

@@ -429,6 +429,10 @@ static int pda_power_probe(struct platform_device *pdev)
 
 static int pda_power_remove(struct platform_device *pdev)
 {
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier)
+		usb_unregister_notifier(transceiver, &otg_nb);
+#endif
 	if (pdata->is_usb_online && usb_irq)
 		free_irq(usb_irq->start, pda_psy_usb);
 	if (pdata->is_ac_online && ac_irq)

drivers/power/supply/power_supply_core.c

@@ -565,9 +565,11 @@ EXPORT_SYMBOL_GPL(devm_power_supply_get_by_phandle);
 int power_supply_get_battery_info(struct power_supply *psy,
 				  struct power_supply_battery_info *info)
 {
+	struct power_supply_resistance_temp_table *resist_table;
 	struct device_node *battery_np;
 	const char *value;
 	int err, len, index;
+	const __be32 *list;
 
 	info->energy_full_design_uwh         = -EINVAL;
 	info->charge_full_design_uah         = -EINVAL;
@@ -578,6 +580,7 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	info->constant_charge_current_max_ua = -EINVAL;
 	info->constant_charge_voltage_max_uv = -EINVAL;
 	info->factory_internal_resistance_uohm  = -EINVAL;
+	info->resist_table = NULL;
 
 	for (index = 0; index < POWER_SUPPLY_OCV_TEMP_MAX; index++) {
 		info->ocv_table[index]       = NULL;
@@ -644,7 +647,6 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	for (index = 0; index < len; index++) {
 		struct power_supply_battery_ocv_table *table;
 		char *propname;
-		const __be32 *list;
 		int i, tab_len, size;
 
 		propname = kasprintf(GFP_KERNEL, "ocv-capacity-table-%d", index);
@@ -677,6 +679,26 @@ int power_supply_get_battery_info(struct power_supply *psy,
 		}
 	}
 
+	list = of_get_property(battery_np, "resistance-temp-table", &len);
+	if (!list || !len)
+		goto out_put_node;
+
+	info->resist_table_size = len / (2 * sizeof(__be32));
+	resist_table = info->resist_table = devm_kcalloc(&psy->dev,
+							 info->resist_table_size,
+							 sizeof(*resist_table),
+							 GFP_KERNEL);
+	if (!info->resist_table) {
+		power_supply_put_battery_info(psy, info);
+		err = -ENOMEM;
+		goto out_put_node;
+	}
+
+	for (index = 0; index < info->resist_table_size; index++) {
+		resist_table[index].temp = be32_to_cpu(*list++);
+		resist_table[index].resistance = be32_to_cpu(*list++);
+	}
+
 out_put_node:
 	of_node_put(battery_np);
 	return err;
@@ -692,9 +714,52 @@ void power_supply_put_battery_info(struct power_supply *psy,
 		if (info->ocv_table[i])
 			devm_kfree(&psy->dev, info->ocv_table[i]);
 	}
+
+	if (info->resist_table)
+		devm_kfree(&psy->dev, info->resist_table);
 }
 EXPORT_SYMBOL_GPL(power_supply_put_battery_info);
 
+/**
+ * power_supply_temp2resist_simple() - find the battery internal resistance
+ * percent
+ * @table: Pointer to battery resistance temperature table
+ * @table_len: The table length
+ * @ocv: Current temperature
+ *
+ * This helper function is used to look up battery internal resistance percent
+ * according to current temperature value from the resistance temperature table,
+ * and the table must be ordered descending. Then the actual battery internal
+ * resistance = the ideal battery internal resistance * percent / 100.
+ *
+ * Return: the battery internal resistance percent
+ */
+int power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table,
+				    int table_len, int temp)
+{
+	int i, resist;
+
+	for (i = 0; i < table_len; i++)
+		if (temp > table[i].temp)
+			break;
+
+	if (i > 0 && i < table_len) {
+		int tmp;
+
+		tmp = (table[i - 1].resistance - table[i].resistance) *
+			(temp - table[i].temp);
+		tmp /= table[i - 1].temp - table[i].temp;
+		resist = tmp + table[i].resistance;
+	} else if (i == 0) {
+		resist = table[0].resistance;
+	} else {
+		resist = table[table_len - 1].resistance;
+	}
+
+	return resist;
+}
+EXPORT_SYMBOL_GPL(power_supply_temp2resist_simple);
+
 /**
  * power_supply_ocv2cap_simple() - find the battery capacity
  * @table: Pointer to battery OCV lookup table

drivers/power/supply/sbs-battery.c

@@ -5,6 +5,7 @@
  * Copyright (c) 2010, NVIDIA Corporation.
  */
 
+#include <linux/bits.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio/consumer.h>
@@ -46,10 +47,10 @@ enum {
 
 /* Battery Mode defines */
 #define BATTERY_MODE_OFFSET		0x03
-#define BATTERY_MODE_MASK		0x8000
-enum sbs_battery_mode {
-	BATTERY_MODE_AMPS = 0,
-	BATTERY_MODE_WATTS = 0x8000
+#define BATTERY_MODE_CAPACITY_MASK	BIT(15)
+enum sbs_capacity_mode {
+	CAPACITY_MODE_AMPS = 0,
+	CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
 };
 
 /* manufacturer access defines */
@@ -518,8 +519,8 @@ static void  sbs_unit_adjustment(struct i2c_client *client,
 	}
 }
 
-static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
-	enum sbs_battery_mode mode)
+static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
+	enum sbs_capacity_mode mode)
 {
 	int ret, original_val;
 
@@ -527,13 +528,13 @@ static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
 	if (original_val < 0)
 		return original_val;
 
-	if ((original_val & BATTERY_MODE_MASK) == mode)
+	if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
 		return mode;
 
-	if (mode == BATTERY_MODE_AMPS)
-		ret = original_val & ~BATTERY_MODE_MASK;
+	if (mode == CAPACITY_MODE_AMPS)
+		ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
 	else
-		ret = original_val | BATTERY_MODE_MASK;
+		ret = original_val | BATTERY_MODE_CAPACITY_MASK;
 
 	ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
 	if (ret < 0)
@@ -541,7 +542,7 @@ static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
 
 	usleep_range(1000, 2000);
 
-	return original_val & BATTERY_MODE_MASK;
+	return original_val & BATTERY_MODE_CAPACITY_MASK;
 }
 
 static int sbs_get_battery_capacity(struct i2c_client *client,
@@ -549,13 +550,13 @@ static int sbs_get_battery_capacity(struct i2c_client *client,
 	union power_supply_propval *val)
 {
 	s32 ret;
-	enum sbs_battery_mode mode = BATTERY_MODE_WATTS;
+	enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
 
 	if (power_supply_is_amp_property(psp))
-		mode = BATTERY_MODE_AMPS;
+		mode = CAPACITY_MODE_AMPS;
 
-	mode = sbs_set_battery_mode(client, mode);
-	if (mode < 0)
+	mode = sbs_set_capacity_mode(client, mode);
+	if ((int)mode < 0)
 		return mode;
 
 	ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
@@ -564,7 +565,7 @@ static int sbs_get_battery_capacity(struct i2c_client *client,
 
 	val->intval = ret;
 
-	ret = sbs_set_battery_mode(client, mode);
+	ret = sbs_set_capacity_mode(client, mode);
 	if (ret < 0)
 		return ret;
 
@@ -1001,6 +1002,6 @@ module_i2c_driver(sbs_battery_driver);
 MODULE_DESCRIPTION("SBS battery monitor driver");
 MODULE_LICENSE("GPL");
 
-module_param(force_load, bool, S_IRUSR | S_IRGRP | S_IROTH);
+module_param(force_load, bool, 0444);
 MODULE_PARM_DESC(force_load,
 		 "Attempt to load the driver even if no battery is connected");

drivers/power/supply/sc27xx_fuel_gauge.c

@@ -62,6 +62,8 @@
 
 #define SC27XX_FGU_CUR_BASIC_ADC	8192
 #define SC27XX_FGU_SAMPLE_HZ		2
+/* micro Ohms */
+#define SC27XX_FGU_IDEAL_RESISTANCE	20000
 
 /*
  * struct sc27xx_fgu_data: describe the FGU device
@@ -81,9 +83,12 @@
  * @max_volt: the maximum constant input voltage in millivolt
  * @min_volt: the minimum drained battery voltage in microvolt
  * @table_len: the capacity table length
+ * @resist_table_len: the resistance table length
  * @cur_1000ma_adc: ADC value corresponding to 1000 mA
  * @vol_1000mv_adc: ADC value corresponding to 1000 mV
+ * @calib_resist: the real resistance of coulomb counter chip in uOhm
  * @cap_table: capacity table with corresponding ocv
+ * @resist_table: resistance percent table with corresponding temperature
  */
 struct sc27xx_fgu_data {
 	struct regmap *regmap;
@@ -103,15 +108,19 @@ struct sc27xx_fgu_data {
 	int max_volt;
 	int min_volt;
 	int table_len;
+	int resist_table_len;
 	int cur_1000ma_adc;
 	int vol_1000mv_adc;
+	int calib_resist;
 	struct power_supply_battery_ocv_table *cap_table;
+	struct power_supply_resistance_temp_table *resist_table;
 };
 
 static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity);
 static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
 					    int cap, bool int_mode);
 static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap);
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp);
 
 static const char * const sc27xx_charger_supply_name[] = {
 	"sc2731_charger",
@@ -434,7 +443,7 @@ static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val)
 
 static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
 {
-	int vol, cur, ret;
+	int vol, cur, ret, temp, resistance;
 
 	ret = sc27xx_fgu_get_vbat_vol(data, &vol);
 	if (ret)
@@ -444,8 +453,19 @@ static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
 	if (ret)
 		return ret;
 
+	resistance = data->internal_resist;
+	if (data->resist_table_len > 0) {
+		ret = sc27xx_fgu_get_temp(data, &temp);
+		if (ret)
+			return ret;
+
+		resistance = power_supply_temp2resist_simple(data->resist_table,
+						data->resist_table_len, temp);
+		resistance = data->internal_resist * resistance / 100;
+	}
+
 	/* Return the battery OCV in micro volts. */
-	*val = vol * 1000 - cur * data->internal_resist;
+	*val = vol * 1000 - cur * resistance;
 
 	return 0;
 }
@@ -884,7 +904,9 @@ static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data)
 	 */
 	cal_4200mv = (calib_data & 0x1ff) + 6963 - 4096 - 256;
 	data->vol_1000mv_adc = DIV_ROUND_CLOSEST(cal_4200mv * 10, 42);
-	data->cur_1000ma_adc = data->vol_1000mv_adc * 4;
+	data->cur_1000ma_adc =
+		DIV_ROUND_CLOSEST(data->vol_1000mv_adc * 4 * data->calib_resist,
+				  SC27XX_FGU_IDEAL_RESISTANCE);
 
 	kfree(buf);
 	return 0;
@@ -929,6 +951,18 @@ static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
 	if (!data->alarm_cap)
 		data->alarm_cap += 1;
 
+	data->resist_table_len = info.resist_table_size;
+	if (data->resist_table_len > 0) {
+		data->resist_table = devm_kmemdup(data->dev, info.resist_table,
+						  data->resist_table_len *
+						  sizeof(struct power_supply_resistance_temp_table),
+						  GFP_KERNEL);
+		if (!data->resist_table) {
+			power_supply_put_battery_info(data->battery, &info);
+			return -ENOMEM;
+		}
+	}
+
 	power_supply_put_battery_info(data->battery, &info);
 
 	ret = sc27xx_fgu_calibration(data);
@@ -1051,6 +1085,15 @@ static int sc27xx_fgu_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = device_property_read_u32(&pdev->dev,
+				       "sprd,calib-resistance-micro-ohms",
+				       &data->calib_resist);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to get fgu calibration resistance\n");
+		return ret;
+	}
+
 	data->channel = devm_iio_channel_get(dev, "bat-temp");
 	if (IS_ERR(data->channel)) {
 		dev_err(dev, "failed to get IIO channel\n");

drivers/power/supply/ucs1002_power.c

@@ -100,7 +100,9 @@ struct ucs1002_info {
 	struct i2c_client *client;
 	struct regmap *regmap;
 	struct regulator_desc *regulator_descriptor;
+	struct regulator_dev *rdev;
 	bool present;
+	bool output_disable;
 };
 
 static enum power_supply_property ucs1002_props[] = {
@@ -233,6 +235,11 @@ static int ucs1002_get_max_current(struct ucs1002_info *info,
 	unsigned int reg;
 	int ret;
 
+	if (info->output_disable) {
+		val->intval = 0;
+		return 0;
+	}
+
 	ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
 	if (ret)
 		return ret;
@@ -247,6 +254,12 @@ static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
 	unsigned int reg;
 	int ret, idx;
 
+	if (val == 0) {
+		info->output_disable = true;
+		regulator_disable_regmap(info->rdev);
+		return 0;
+	}
+
 	for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
 		if (val == ucs1002_current_limit_uA[idx])
 			break;
@@ -270,6 +283,12 @@ static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
 	if (reg != idx)
 		return -EINVAL;
 
+	info->output_disable = false;
+
+	if (info->rdev && info->rdev->use_count &&
+	    !regulator_is_enabled_regmap(info->rdev))
+		regulator_enable_regmap(info->rdev);
+
 	return 0;
 }
 
@@ -470,9 +489,24 @@ static irqreturn_t ucs1002_alert_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int ucs1002_regulator_enable(struct regulator_dev *rdev)
+{
+	struct ucs1002_info *info = rdev_get_drvdata(rdev);
+
+	/*
+	 * If the output is disabled due to 0 maximum current, just pretend the
+	 * enable did work. The regulator will be enabled as soon as we get a
+	 * a non-zero maximum current budget.
+	 */
+	if (info->output_disable)
+		return 0;
+
+	return regulator_enable_regmap(rdev);
+}
+
 static const struct regulator_ops ucs1002_regulator_ops = {
 	.is_enabled	= regulator_is_enabled_regmap,
-	.enable		= regulator_enable_regmap,
+	.enable		= ucs1002_regulator_enable,
 	.disable	= regulator_disable_regmap,
 };
 
@@ -499,7 +533,6 @@ static int ucs1002_probe(struct i2c_client *client,
 	};
 	struct regulator_config regulator_config = {};
 	int irq_a_det, irq_alert, ret;
-	struct regulator_dev *rdev;
 	struct ucs1002_info *info;
 	unsigned int regval;
 
@@ -589,10 +622,11 @@ static int ucs1002_probe(struct i2c_client *client,
 	regulator_config.dev = dev;
 	regulator_config.of_node = dev->of_node;
 	regulator_config.regmap = info->regmap;
+	regulator_config.driver_data = info;
 
-	rdev = devm_regulator_register(dev, info->regulator_descriptor,
+	info->rdev = devm_regulator_register(dev, info->regulator_descriptor,
 				       &regulator_config);
-	ret = PTR_ERR_OR_ZERO(rdev);
+	ret = PTR_ERR_OR_ZERO(info->rdev);
 	if (ret) {
 		dev_err(dev, "Failed to register VBUS regulator: %d\n", ret);
 		return ret;

include/linux/power/max17042_battery.h

@@ -105,11 +105,56 @@ enum max17042_register {
 
 	MAX17042_OCV		= 0xEE,
 
-	MAX17042_OCVInternal	= 0xFB,
+	MAX17042_OCVInternal	= 0xFB,  /* MAX17055 VFOCV */
 
 	MAX17042_VFSOC		= 0xFF,
 };
 
+enum max17055_register {
+	MAX17055_QRes		= 0x0C,
+	MAX17055_TTF		= 0x20,
+	MAX17055_V_empty	= 0x3A,
+	MAX17055_TIMER		= 0x3E,
+	MAX17055_USER_MEM	= 0x40,
+	MAX17055_RGAIN		= 0x42,
+
+	MAX17055_ConvgCfg	= 0x49,
+	MAX17055_VFRemCap	= 0x4A,
+
+	MAX17055_STATUS2	= 0xB0,
+	MAX17055_POWER		= 0xB1,
+	MAX17055_ID		= 0xB2,
+	MAX17055_AvgPower	= 0xB3,
+	MAX17055_IAlrtTh	= 0xB4,
+	MAX17055_TTFCfg		= 0xB5,
+	MAX17055_CVMixCap	= 0xB6,
+	MAX17055_CVHalfTime	= 0xB7,
+	MAX17055_CGTempCo	= 0xB8,
+	MAX17055_Curve		= 0xB9,
+	MAX17055_HibCfg		= 0xBA,
+	MAX17055_Config2	= 0xBB,
+	MAX17055_VRipple	= 0xBC,
+	MAX17055_RippleCfg	= 0xBD,
+	MAX17055_TimerH		= 0xBE,
+
+	MAX17055_RSense		= 0xD0,
+	MAX17055_ScOcvLim	= 0xD1,
+
+	MAX17055_SOCHold	= 0xD3,
+	MAX17055_MaxPeakPwr	= 0xD4,
+	MAX17055_SusPeakPwr	= 0xD5,
+	MAX17055_PackResistance	= 0xD6,
+	MAX17055_SysResistance	= 0xD7,
+	MAX17055_MinSysV	= 0xD8,
+	MAX17055_MPPCurrent	= 0xD9,
+	MAX17055_SPPCurrent	= 0xDA,
+	MAX17055_ModelCfg	= 0xDB,
+	MAX17055_AtQResidual	= 0xDC,
+	MAX17055_AtTTE		= 0xDD,
+	MAX17055_AtAvSOC	= 0xDE,
+	MAX17055_AtAvCap	= 0xDF,
+};
+
 /* Registers specific to max17047/50 */
 enum max17047_register {
 	MAX17047_QRTbl00	= 0x12,
@@ -125,6 +170,7 @@ enum max170xx_chip_type {
 	MAXIM_DEVICE_TYPE_MAX17042,
 	MAXIM_DEVICE_TYPE_MAX17047,
 	MAXIM_DEVICE_TYPE_MAX17050,
+	MAXIM_DEVICE_TYPE_MAX17055,
 
 	MAXIM_DEVICE_TYPE_NUM
 };

include/linux/power_supply.h

@@ -325,6 +325,11 @@ struct power_supply_battery_ocv_table {
 	int capacity;	/* percent */
 };
 
+struct power_supply_resistance_temp_table {
+	int temp;	/* celsius */
+	int resistance;	/* internal resistance percent */
+};
+
 #define POWER_SUPPLY_OCV_TEMP_MAX 20
 
 /*
@@ -349,6 +354,8 @@ struct power_supply_battery_info {
 	int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];/* celsius */
 	struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
 	int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
+	struct power_supply_resistance_temp_table *resist_table;
+	int resist_table_size;
 };
 
 extern struct atomic_notifier_head power_supply_notifier;
@@ -381,6 +388,9 @@ power_supply_find_ocv2cap_table(struct power_supply_battery_info *info,
 				int temp, int *table_len);
 extern int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info,
 					int ocv, int temp);
+extern int
+power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table,
+				int table_len, int temp);
 extern void power_supply_changed(struct power_supply *psy);
 extern int power_supply_am_i_supplied(struct power_supply *psy);
 extern int power_supply_set_input_current_limit_from_supplier(