PCI: imx6: Implement reset sequence for i.MX6+

I.MX6+ has a dedicated bit for resetting PCIe core, which should be used
instead of a regular reset sequence since using the latter will hang the
SoC.

This commit is based on c34068d48273e24d392d9a49a38be807954420ed from
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.gitTested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -4,7 +4,7 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
 
 Required properties:
-- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie"
+- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
 - reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.

drivers/pci/host/pci-imx6.c

@@ -34,7 +34,8 @@
 
 enum imx6_pcie_variants {
 	IMX6Q,
-	IMX6SX
+	IMX6SX,
+	IMX6QP,
 };
 
 struct imx6_pcie {
@@ -256,6 +257,11 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
 				   IMX6SX_GPR5_PCIE_BTNRST_RESET,
 				   IMX6SX_GPR5_PCIE_BTNRST_RESET);
 		break;
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_SW_RST,
+				   IMX6Q_GPR1_PCIE_SW_RST);
+		break;
 	case IMX6Q:
 		/*
 		 * If the bootloader already enabled the link we need some
@@ -310,6 +316,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
 		break;
+	case IMX6QP: 		/* FALLTHROUGH */
 	case IMX6Q:
 		/* power up core phy and enable ref clock */
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
@@ -370,9 +377,20 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
 					!imx6_pcie->gpio_active_high);
 	}
 
-	if (imx6_pcie->variant == IMX6SX)
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
 				   IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
+		break;
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+				   IMX6Q_GPR1_PCIE_SW_RST, 0);
+
+		usleep_range(200, 500);
+		break;
+	case IMX6Q:		/* Nothing to do */
+		break;
+	}
 
 	return 0;
 
@@ -718,6 +736,7 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
 static const struct of_device_id imx6_pcie_of_match[] = {
 	{ .compatible = "fsl,imx6q-pcie",  .data = (void *)IMX6Q,  },
 	{ .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
+	{ .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -95,6 +95,7 @@
 #define IMX6Q_GPR0_DMAREQ_MUX_SEL0_IOMUX	BIT(0)
 
 #define IMX6Q_GPR1_PCIE_REQ_MASK		(0x3 << 30)
+#define IMX6Q_GPR1_PCIE_SW_RST			BIT(29)
 #define IMX6Q_GPR1_PCIE_EXIT_L1			BIT(28)
 #define IMX6Q_GPR1_PCIE_RDY_L23			BIT(27)
 #define IMX6Q_GPR1_PCIE_ENTER_L1		BIT(26)