MIPS: Add cases for CPU_I6400

Add a CPU_I6400 case to various switch statements, doing the same thing
as for CPU_P5600.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10635/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/cpu-type.h

@@ -77,6 +77,10 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	 */
 #endif
 
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R6
+	case CPU_I6400:
+#endif
+
 #ifdef CONFIG_SYS_HAS_CPU_R3000
 	case CPU_R2000:
 	case CPU_R3000:

arch/mips/kernel/idle.c

@@ -196,6 +196,7 @@ void __init check_wait(void)
 	case CPU_INTERAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
+	case CPU_I6400:
 		cpu_wait = r4k_wait;
 		if (read_c0_config7() & MIPS_CONF7_WII)
 			cpu_wait = r4k_wait_irqoff;

arch/mips/kernel/perf_event_mipsxx.c

@@ -1556,6 +1556,7 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 #endif
 		break;
 	case CPU_P5600:
+	case CPU_I6400:
 		/* 8-bit event numbers */
 		raw_id = config & 0x1ff;
 		base_id = raw_id & 0xff;
@@ -1717,6 +1718,11 @@ init_hw_perf_events(void)
 		mipspmu.general_event_map = &mipsxxcore_event_map2;
 		mipspmu.cache_event_map = &mipsxxcore_cache_map2;
 		break;
+	case CPU_I6400:
+		mipspmu.name = "mips/I6400";
+		mipspmu.general_event_map = &mipsxxcore_event_map2;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map2;
+		break;
 	case CPU_1004K:
 		mipspmu.name = "mips/1004K";
 		mipspmu.general_event_map = &mipsxxcore_event_map;

arch/mips/kernel/pm-cps.c

@@ -267,6 +267,7 @@ static int __init cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
 
 	/* CPUs which do not require the workaround */
 	case CPU_P5600:
+	case CPU_I6400:
 		return 0;
 
 	default:
@@ -671,6 +672,7 @@ static int __init cps_pm_init(void)
 	case CPU_PROAPTIV:
 	case CPU_M5150:
 	case CPU_P5600:
+	case CPU_I6400:
 		stype_intervention = 0x2;
 		stype_memory = 0x3;
 		stype_ordering = 0x10;

arch/mips/kernel/spram.c

@@ -209,6 +209,7 @@ void spram_config(void)
 	case CPU_PROAPTIV:
 	case CPU_P5600:
 	case CPU_QEMU_GENERIC:
+	case CPU_I6400:
 		config0 = read_c0_config();
 		/* FIXME: addresses are Malta specific */
 		if (config0 & (1<<24)) {

arch/mips/kernel/traps.c

@@ -1651,6 +1651,7 @@ static inline void parity_protection_init(void)
 	case CPU_PROAPTIV:
 	case CPU_P5600:
 	case CPU_QEMU_GENERIC:
+	case CPU_I6400:
 		{
 #define ERRCTL_PE	0x80000000
 #define ERRCTL_L2P	0x00800000

arch/mips/mm/c-r4k.c

@@ -1276,6 +1276,7 @@ static void probe_pcache(void)
 	case CPU_PROAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
+	case CPU_I6400:
 		if (!(read_c0_config7() & MIPS_CONF7_IAR) &&
 		    (c->icache.waysize > PAGE_SIZE))
 			c->icache.flags |= MIPS_CACHE_ALIASES;

arch/mips/oprofile/common.c

@@ -91,6 +91,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_INTERAPTIV:
 	case CPU_PROAPTIV:
 	case CPU_P5600:
+	case CPU_I6400:
 	case CPU_M5150:
 	case CPU_LOONGSON1:
 	case CPU_SB1:

arch/mips/oprofile/op_model_mipsxx.c

@@ -392,6 +392,10 @@ static int __init mipsxx_init(void)
 		op_model_mipsxx_ops.cpu_type = "mips/P5600";
 		break;
 
+	case CPU_I6400:
+		op_model_mipsxx_ops.cpu_type = "mips/I6400";
+		break;
+
 	case CPU_M5150:
 		op_model_mipsxx_ops.cpu_type = "mips/M5150";
 		break;