Merge tag 'linux-can-next-for-4.16-20180116' of...

Merge tag 'linux-can-next-for-4.16-20180116' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2018-01-16

this is a pull request for net-next/master consisting of 9 patches.

This is a series of patches, some of them initially by Franklin S Cooper
Jr, which was picked up by Faiz Abbas. Faiz Abbas added some patches
while working on this series, I contributed one as well.

The first two patches add support to CAN device infrastructure to limit
the bitrate of a CAN adapter if the used CAN-transceiver has a certain
maximum bitrate.

The remaining patches improve the m_can driver. They add support for
bitrate limiting to the driver, clean up the driver and add support for
runtime PM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/can/can-transceiver.txt

+Generic CAN transceiver Device Tree binding
+------------------------------
+
+CAN transceiver typically limits the max speed in standard CAN and CAN FD
+modes. Typically these limitations are static and the transceivers themselves
+provide no way to detect this limitation at runtime. For this situation,
+the "can-transceiver" node can be used.
+
+Required Properties:
+ max-bitrate:	a positive non 0 value that determines the max
+		speed that CAN/CAN-FD can run. Any other value
+		will be ignored.
+
+Examples:
+
+Based on Texas Instrument's TCAN1042HGV CAN Transceiver
+
+m_can0 {
+	....
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+	...
+};

Documentation/devicetree/bindings/net/can/m_can.txt

@@ -43,6 +43,11 @@ Required properties:
 			  Please refer to 2.4.1 Message RAM Configuration in
 			  Bosch M_CAN user manual for details.
 
+Optional Subnode:
+- can-transceiver	: Can-transceiver subnode describing maximum speed
+			  that can be used for CAN/CAN-FD modes. See
+			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
+			  for details.
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
@@ -63,4 +68,8 @@ Board dts:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_m_can1>;
 	status = "enabled";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
 };

drivers/net/can/dev.c

@@ -27,6 +27,7 @@
 #include <linux/can/skb.h>
 #include <linux/can/netlink.h>
 #include <linux/can/led.h>
+#include <linux/of.h>
 #include <net/rtnetlink.h>
 
 #define MOD_DESC "CAN device driver interface"
@@ -814,6 +815,29 @@ int open_candev(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(open_candev);
 
+#ifdef CONFIG_OF
+/* Common function that can be used to understand the limitation of
+ * a transceiver when it provides no means to determine these limitations
+ * at runtime.
+ */
+void of_can_transceiver(struct net_device *dev)
+{
+	struct device_node *dn;
+	struct can_priv *priv = netdev_priv(dev);
+	struct device_node *np = dev->dev.parent->of_node;
+	int ret;
+
+	dn = of_get_child_by_name(np, "can-transceiver");
+	if (!dn)
+		return;
+
+	ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
+	if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
+		netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
+}
+EXPORT_SYMBOL_GPL(of_can_transceiver);
+#endif
+
 /*
  * Common close function for cleanup before the device gets closed.
  *
@@ -913,6 +937,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
+			netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->bitrate_max);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->bittiming, &bt, sizeof(bt));
 
 		if (priv->do_set_bittiming) {
@@ -997,6 +1028,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->data_bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->bitrate_max && dbt.bitrate > priv->bitrate_max) {
+			netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->bitrate_max);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
 
 		if (priv->do_set_data_bittiming) {
@@ -1064,6 +1102,7 @@ static size_t can_get_size(const struct net_device *dev)
 	if (priv->data_bitrate_const)				/* IFLA_CAN_DATA_BITRATE_CONST */
 		size += nla_total_size(sizeof(*priv->data_bitrate_const) *
 				       priv->data_bitrate_const_cnt);
+	size += sizeof(priv->bitrate_max);			/* IFLA_CAN_BITRATE_MAX */
 
 	return size;
 }
@@ -1121,7 +1160,11 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 	     nla_put(skb, IFLA_CAN_DATA_BITRATE_CONST,
 		     sizeof(*priv->data_bitrate_const) *
 		     priv->data_bitrate_const_cnt,
-		     priv->data_bitrate_const))
+		     priv->data_bitrate_const)) ||
+
+	    (nla_put(skb, IFLA_CAN_BITRATE_MAX,
+		     sizeof(priv->bitrate_max),
+		     &priv->bitrate_max))
 	    )
 
 		return -EMSGSIZE;

drivers/net/can/m_can/m_can.c

@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 
@@ -126,6 +127,12 @@ enum m_can_mram_cfg {
 #define DBTP_DSJW_SHIFT		0
 #define DBTP_DSJW_MASK		(0xf << DBTP_DSJW_SHIFT)
 
+/* Transmitter Delay Compensation Register (TDCR) */
+#define TDCR_TDCO_SHIFT		8
+#define TDCR_TDCO_MASK		(0x7F << TDCR_TDCO_SHIFT)
+#define TDCR_TDCF_SHIFT		0
+#define TDCR_TDCF_MASK		(0x7F << TDCR_TDCF_SHIFT)
+
 /* Test Register (TEST) */
 #define TEST_LBCK		BIT(4)
 
@@ -625,21 +632,16 @@ static int m_can_clk_start(struct m_can_priv *priv)
 {
 	int err;
 
-	err = clk_prepare_enable(priv->hclk);
+	err = pm_runtime_get_sync(priv->device);
 	if (err)
-		return err;
-
-	err = clk_prepare_enable(priv->cclk);
-	if (err)
-		clk_disable_unprepare(priv->hclk);
+		pm_runtime_put_noidle(priv->device);
 
 	return err;
 }
 
 static void m_can_clk_stop(struct m_can_priv *priv)
 {
-	clk_disable_unprepare(priv->cclk);
-	clk_disable_unprepare(priv->hclk);
+	pm_runtime_put_sync(priv->device);
 }
 
 static int m_can_get_berr_counter(const struct net_device *dev,
@@ -987,13 +989,47 @@ static int m_can_set_bittiming(struct net_device *dev)
 	m_can_write(priv, M_CAN_NBTP, reg_btp);
 
 	if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+		reg_btp = 0;
 		brp = dbt->brp - 1;
 		sjw = dbt->sjw - 1;
 		tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1;
 		tseg2 = dbt->phase_seg2 - 1;
-		reg_btp = (brp << DBTP_DBRP_SHIFT) | (sjw << DBTP_DSJW_SHIFT) |
-			(tseg1 << DBTP_DTSEG1_SHIFT) |
-			(tseg2 << DBTP_DTSEG2_SHIFT);
+
+		/* TDC is only needed for bitrates beyond 2.5 MBit/s.
+		 * This is mentioned in the "Bit Time Requirements for CAN FD"
+		 * paper presented at the International CAN Conference 2013
+		 */
+		if (dbt->bitrate > 2500000) {
+			u32 tdco, ssp;
+
+			/* Use the same value of secondary sampling point
+			 * as the data sampling point
+			 */
+			ssp = dbt->sample_point;
+
+			/* Equation based on Bosch's M_CAN User Manual's
+			 * Transmitter Delay Compensation Section
+			 */
+			tdco = (priv->can.clock.freq / 1000) *
+			       ssp / dbt->bitrate;
+
+			/* Max valid TDCO value is 127 */
+			if (tdco > 127) {
+				netdev_warn(dev, "TDCO value of %u is beyond maximum. Using maximum possible value\n",
+					    tdco);
+				tdco = 127;
+			}
+
+			reg_btp |= DBTP_TDC;
+			m_can_write(priv, M_CAN_TDCR,
+				    tdco << TDCR_TDCO_SHIFT);
+		}
+
+		reg_btp |= (brp << DBTP_DBRP_SHIFT) |
+			   (sjw << DBTP_DSJW_SHIFT) |
+			   (tseg1 << DBTP_DTSEG1_SHIFT) |
+			   (tseg2 << DBTP_DTSEG2_SHIFT);
+
 		m_can_write(priv, M_CAN_DBTP, reg_btp);
 	}
 
@@ -1143,11 +1179,6 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
 	return 0;
 }
 
-static void free_m_can_dev(struct net_device *dev)
-{
-	free_candev(dev);
-}
-
 /* Checks core release number of M_CAN
  * returns 0 if an unsupported device is detected
  * else it returns the release and step coded as:
@@ -1207,31 +1238,20 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)
 	return !niso_timeout;
 }
 
-static struct net_device *alloc_m_can_dev(struct platform_device *pdev,
-					  void __iomem *addr, u32 tx_fifo_size)
+static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
+			   void __iomem *addr)
 {
-	struct net_device *dev;
 	struct m_can_priv *priv;
 	int m_can_version;
-	unsigned int echo_buffer_count;
 
 	m_can_version = m_can_check_core_release(addr);
 	/* return if unsupported version */
 	if (!m_can_version) {
-		dev = NULL;
-		goto return_dev;
+		dev_err(&pdev->dev, "Unsupported version number: %2d",
+			m_can_version);
+		return -EINVAL;
 	}
 
-	/* If version < 3.1.x, then only one echo buffer is used */
-	echo_buffer_count = ((m_can_version == 30)
-				? 1U
-				: (unsigned int)tx_fifo_size);
-
-	dev = alloc_candev(sizeof(*priv), echo_buffer_count);
-	if (!dev) {
-		dev = NULL;
-		goto return_dev;
-	}
 	priv = netdev_priv(dev);
 	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
 
@@ -1273,16 +1293,12 @@ static struct net_device *alloc_m_can_dev(struct platform_device *pdev,
 						: 0);
 		break;
 	default:
-		/* Unsupported device: free candev */
-		free_m_can_dev(dev);
 		dev_err(&pdev->dev, "Unsupported version number: %2d",
 			priv->version);
-		dev = NULL;
-		break;
+		return -EINVAL;
 	}
 
-return_dev:
-	return dev;
+	return 0;
 }
 
 static int m_can_open(struct net_device *dev)
@@ -1574,37 +1590,26 @@ static int m_can_plat_probe(struct platform_device *pdev)
 		goto failed_ret;
 	}
 
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	ret = clk_prepare_enable(hclk);
-	if (ret)
-		goto disable_hclk_ret;
-
-	ret = clk_prepare_enable(cclk);
-	if (ret)
-		goto disable_cclk_ret;
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
 	addr = devm_ioremap_resource(&pdev->dev, res);
 	irq = platform_get_irq_byname(pdev, "int0");
 
 	if (IS_ERR(addr) || irq < 0) {
 		ret = -EINVAL;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* message ram could be shared */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
 	if (!res) {
 		ret = -ENODEV;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (!mram_addr) {
 		ret = -ENOMEM;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* get message ram configuration */
@@ -1613,7 +1618,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 					 sizeof(mram_config_vals) / 4);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
 
 	/* Get TX FIFO size
@@ -1622,11 +1627,12 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	tx_fifo_size = mram_config_vals[7];
 
 	/* allocate the m_can device */
-	dev = alloc_m_can_dev(pdev, addr, tx_fifo_size);
+	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
 	if (!dev) {
 		ret = -ENOMEM;
-		goto disable_cclk_ret;
+		goto failed_ret;
 	}
+
 	priv = netdev_priv(dev);
 	dev->irq = irq;
 	priv->device = &pdev->dev;
@@ -1640,30 +1646,42 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
+	/* Enable clocks. Necessary to read Core Release in order to determine
+	 * M_CAN version
+	 */
+	pm_runtime_enable(&pdev->dev);
+	ret = m_can_clk_start(priv);
+	if (ret)
+		goto pm_runtime_fail;
+
+	ret = m_can_dev_setup(pdev, dev, addr);
+	if (ret)
+		goto clk_disable;
+
 	ret = register_m_can_dev(dev);
 	if (ret) {
 		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
 			KBUILD_MODNAME, ret);
-		goto failed_free_dev;
+		goto clk_disable;
 	}
 
 	devm_can_led_init(dev);
 
+	of_can_transceiver(dev);
+
 	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
 		 KBUILD_MODNAME, dev->irq, priv->version);
 
 	/* Probe finished
 	 * Stop clocks. They will be reactivated once the M_CAN device is opened
 	 */
-
-	goto disable_cclk_ret;
-
-failed_free_dev:
-	free_m_can_dev(dev);
-disable_cclk_ret:
-	clk_disable_unprepare(cclk);
-disable_hclk_ret:
-	clk_disable_unprepare(hclk);
+clk_disable:
+	m_can_clk_stop(priv);
+pm_runtime_fail:
+	if (ret) {
+		pm_runtime_disable(&pdev->dev);
+		free_candev(dev);
+	}
 failed_ret:
 	return ret;
 }
@@ -1721,14 +1739,47 @@ static int m_can_plat_remove(struct platform_device *pdev)
 	struct net_device *dev = platform_get_drvdata(pdev);
 
 	unregister_m_can_dev(dev);
+
+	pm_runtime_disable(&pdev->dev);
+
 	platform_set_drvdata(pdev, NULL);
 
-	free_m_can_dev(dev);
+	free_candev(dev);
 
 	return 0;
 }
 
+static int m_can_runtime_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *priv = netdev_priv(ndev);
+
+	clk_disable_unprepare(priv->cclk);
+	clk_disable_unprepare(priv->hclk);
+
+	return 0;
+}
+
+static int m_can_runtime_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct m_can_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = clk_prepare_enable(priv->hclk);
+	if (err)
+		return err;
+
+	err = clk_prepare_enable(priv->cclk);
+	if (err)
+		clk_disable_unprepare(priv->hclk);
+
+	return err;
+}
+
 static const struct dev_pm_ops m_can_pmops = {
+	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
+			   m_can_runtime_resume, NULL)
 	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
 };
 

include/linux/can/dev.h

@@ -46,6 +46,7 @@ struct can_priv {
 	unsigned int bitrate_const_cnt;
 	const u32 *data_bitrate_const;
 	unsigned int data_bitrate_const_cnt;
+	u32 bitrate_max;
 	struct can_clock clock;
 
 	enum can_state state;
@@ -166,6 +167,12 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
 void can_free_echo_skb(struct net_device *dev, unsigned int idx);
 
+#ifdef CONFIG_OF
+void of_can_transceiver(struct net_device *dev);
+#else
+static inline void of_can_transceiver(struct net_device *dev) { }
+#endif
+
 struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
 struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 				struct canfd_frame **cfd);

include/uapi/linux/can/netlink.h

@@ -132,6 +132,7 @@ enum {
 	IFLA_CAN_TERMINATION_CONST,
 	IFLA_CAN_BITRATE_CONST,
 	IFLA_CAN_DATA_BITRATE_CONST,
+	IFLA_CAN_BITRATE_MAX,
 	__IFLA_CAN_MAX
 };