Commit 4f985b4c authored by Maxime Ripard's avatar Maxime Ripard Committed by Mike Turquette

clk: sun5i: Add compatibles for Allwinner A13

The A13 has a lot less clocks than the one found in the Allwinner A10.
Add these stripped down clocks to the clock driver and in the
documentation.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: default avatarEmilio López <emilio@elopez.com.ar>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 20faa59e
......@@ -12,22 +12,30 @@ Required properties:
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-ahb-clk" - for the AHB clock
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
"allwinner,sun4i-apb0-clk" - for the APB0 clock
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
"allwinner,sun4i-apb1-clk" - for the APB1 clock
"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
Required properties for all clocks:
- reg : shall be the control register address for the clock.
- clocks : shall be the input parent clock(s) phandle for the clock
- #clock-cells : from common clock binding; shall be set to 0 except for
"allwinner,sun4i-*-gates-clk" where it shall be set to 1
"allwinner,*-gates-clk" where it shall be set to 1
Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
Additionally, "allwinner,*-gates-clk" clocks require:
- clock-output-names : the corresponding gate names that the clock controls
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. The values of this
ID are documented in sunxi/<soc>-gates.txt.
For example:
osc24M: osc24M@01c20050 {
......@@ -50,102 +58,3 @@ cpu: cpu@01c20054 {
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
};
Gate clock outputs
The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
their corresponding offsets as present on sun4i are listed below. Note that
some of these gates are not present on sun5i.
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE0 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
USBOTG 0
EHCI 1
OHCI 2
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
NAND 13
SDRAM 14
SPI0 20
SPI1 21
SPI2 22
STIMER 28
VE 32
LCD 36
CSI 40
DE_BE 44
DE_FE 46
IEP 51
MALI400 52
* APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
CODEC 0
PIO 5
IR 6
* APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
UART1 17
UART3 19
......@@ -333,22 +333,34 @@ struct gates_data {
DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
};
static const __initconst struct gates_data axi_gates_data = {
static const __initconst struct gates_data sun4i_axi_gates_data = {
.mask = {1},
};
static const __initconst struct gates_data ahb_gates_data = {
static const __initconst struct gates_data sun4i_ahb_gates_data = {
.mask = {0x7F77FFF, 0x14FB3F},
};
static const __initconst struct gates_data apb0_gates_data = {
static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
.mask = {0x107067e7, 0x185111},
};
static const __initconst struct gates_data sun4i_apb0_gates_data = {
.mask = {0x4EF},
};
static const __initconst struct gates_data apb1_gates_data = {
static const __initconst struct gates_data sun5i_a13_apb0_gates_data = {
.mask = {0x61},
};
static const __initconst struct gates_data sun4i_apb1_gates_data = {
.mask = {0xFF00F7},
};
static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
.mask = {0xa0007},
};
static void __init sunxi_gates_clk_setup(struct device_node *node,
struct gates_data *data)
{
......@@ -428,10 +440,13 @@ static const __initconst struct of_device_id clk_mux_match[] = {
/* Matches for gate clocks */
static const __initconst struct of_device_id clk_gates_match[] = {
{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,},
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,},
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,},
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,},
{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
{}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment