Commit 4faf7757 authored by Joachim Fenkes's avatar Joachim Fenkes Committed by Roland Dreier

IB/ehca: Serialize HCA-related hCalls if necessary

Several pSeries firmware versions share a rare locking issue in the
HCA-related hCalls. Check for a feature flag that indicates the issue
being fixed and serialize all HCA hCalls if not.
Signed-off-by: default avatarJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
parent 1457edc7
......@@ -43,6 +43,7 @@
#ifdef CONFIG_PPC_64K_PAGES
#include <linux/slab.h>
#endif
#include "ehca_classes.h"
#include "ehca_iverbs.h"
#include "ehca_mrmw.h"
......@@ -66,6 +67,7 @@ int ehca_poll_all_eqs = 1;
int ehca_static_rate = -1;
int ehca_scaling_code = 0;
int ehca_mr_largepage = 1;
int ehca_lock_hcalls = -1;
module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO);
module_param_named(debug_level, ehca_debug_level, int, S_IRUGO);
......@@ -77,6 +79,7 @@ module_param_named(poll_all_eqs, ehca_poll_all_eqs, int, S_IRUGO);
module_param_named(static_rate, ehca_static_rate, int, S_IRUGO);
module_param_named(scaling_code, ehca_scaling_code, int, S_IRUGO);
module_param_named(mr_largepage, ehca_mr_largepage, int, S_IRUGO);
module_param_named(lock_hcalls, ehca_lock_hcalls, bool, S_IRUGO);
MODULE_PARM_DESC(open_aqp1,
"AQP1 on startup (0: no (default), 1: yes)");
......@@ -102,6 +105,9 @@ MODULE_PARM_DESC(scaling_code,
MODULE_PARM_DESC(mr_largepage,
"use large page for MR (0: use PAGE_SIZE (default), "
"1: use large page depending on MR size");
MODULE_PARM_DESC(lock_hcalls,
"serialize all hCalls made by the driver "
"(default: autodetect)");
DEFINE_RWLOCK(ehca_qp_idr_lock);
DEFINE_RWLOCK(ehca_cq_idr_lock);
......@@ -258,6 +264,7 @@ static struct cap_descr {
{ HCA_CAP_UD_LL_QP, "HCA_CAP_UD_LL_QP" },
{ HCA_CAP_RESIZE_MR, "HCA_CAP_RESIZE_MR" },
{ HCA_CAP_MINI_QP, "HCA_CAP_MINI_QP" },
{ HCA_CAP_H_ALLOC_RES_SYNC, "HCA_CAP_H_ALLOC_RES_SYNC" },
};
static int ehca_sense_attributes(struct ehca_shca *shca)
......@@ -333,6 +340,12 @@ static int ehca_sense_attributes(struct ehca_shca *shca)
if (EHCA_BMASK_GET(hca_cap_descr[i].mask, shca->hca_cap))
ehca_gen_dbg(" %s", hca_cap_descr[i].descr);
/* Autodetect hCall locking -- the "H_ALLOC_RESOURCE synced" flag is
* a firmware property, so it's valid across all adapters
*/
if (ehca_lock_hcalls == -1)
ehca_lock_hcalls = !(shca->hca_cap & HCA_CAP_H_ALLOC_RES_SYNC);
/* translate supported MR page sizes; always support 4K */
shca->hca_cap_mr_pgsize = EHCA_PAGESIZE;
if (ehca_mr_largepage) { /* support extra sizes only if enabled */
......
......@@ -89,6 +89,7 @@
#define HCALL9_REGS_FORMAT HCALL7_REGS_FORMAT " r11=%lx r12=%lx"
static DEFINE_SPINLOCK(hcall_lock);
extern int ehca_lock_hcalls;
static u32 get_longbusy_msecs(int longbusy_rc)
{
......@@ -120,26 +121,21 @@ static long ehca_plpar_hcall_norets(unsigned long opcode,
unsigned long arg7)
{
long ret;
int i, sleep_msecs, do_lock;
unsigned long flags;
int i, sleep_msecs;
unsigned long flags = 0;
ehca_gen_dbg("opcode=%lx " HCALL7_REGS_FORMAT,
opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
/* lock H_FREE_RESOURCE(MR) against itself and H_ALLOC_RESOURCE(MR) */
if ((opcode == H_FREE_RESOURCE) && (arg7 == 5)) {
arg7 = 0; /* better not upset firmware */
do_lock = 1;
}
for (i = 0; i < 5; i++) {
if (do_lock)
/* serialize hCalls to work around firmware issue */
if (ehca_lock_hcalls)
spin_lock_irqsave(&hcall_lock, flags);
ret = plpar_hcall_norets(opcode, arg1, arg2, arg3, arg4,
arg5, arg6, arg7);
if (do_lock)
if (ehca_lock_hcalls)
spin_unlock_irqrestore(&hcall_lock, flags);
if (H_IS_LONG_BUSY(ret)) {
......@@ -174,24 +170,22 @@ static long ehca_plpar_hcall9(unsigned long opcode,
unsigned long arg9)
{
long ret;
int i, sleep_msecs, do_lock;
int i, sleep_msecs;
unsigned long flags = 0;
ehca_gen_dbg("INPUT -- opcode=%lx " HCALL9_REGS_FORMAT, opcode,
arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9);
/* lock H_ALLOC_RESOURCE(MR) against itself and H_FREE_RESOURCE(MR) */
do_lock = ((opcode == H_ALLOC_RESOURCE) && (arg2 == 5));
for (i = 0; i < 5; i++) {
if (do_lock)
/* serialize hCalls to work around firmware issue */
if (ehca_lock_hcalls)
spin_lock_irqsave(&hcall_lock, flags);
ret = plpar_hcall9(opcode, outs,
arg1, arg2, arg3, arg4, arg5,
arg6, arg7, arg8, arg9);
if (do_lock)
if (ehca_lock_hcalls)
spin_unlock_irqrestore(&hcall_lock, flags);
if (H_IS_LONG_BUSY(ret)) {
......@@ -821,7 +815,7 @@ u64 hipz_h_free_resource_mr(const struct ipz_adapter_handle adapter_handle,
return ehca_plpar_hcall_norets(H_FREE_RESOURCE,
adapter_handle.handle, /* r4 */
mr->ipz_mr_handle.handle, /* r5 */
0, 0, 0, 0, 5);
0, 0, 0, 0, 0);
}
u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle,
......
......@@ -378,6 +378,7 @@ struct hipz_query_hca {
#define HCA_CAP_UD_LL_QP EHCA_BMASK_IBM(16, 16)
#define HCA_CAP_RESIZE_MR EHCA_BMASK_IBM(17, 17)
#define HCA_CAP_MINI_QP EHCA_BMASK_IBM(18, 18)
#define HCA_CAP_H_ALLOC_RES_SYNC EHCA_BMASK_IBM(19, 19)
/* query port response block */
struct hipz_query_port {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment