Commit 4fc82adf authored by Alexander Duyck's avatar Alexander Duyck Committed by David S. Miller

igb: add support for seperate tx-usecs setting in ethtool

This patch adds support for a seperate tx-usecs interrupt moderation setting
in ethtool which is supported when tx and rx interrupt vectors are sperated.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9c1bbbaf
......@@ -249,8 +249,8 @@ struct igb_adapter {
unsigned int total_rx_bytes;
unsigned int total_rx_packets;
/* Interrupt Throttle Rate */
u32 itr;
u32 itr_setting;
u32 rx_itr_setting;
u32 tx_itr_setting;
u16 tx_itr;
u16 rx_itr;
......@@ -321,6 +321,7 @@ struct igb_adapter {
#define IGB_FLAG_HAS_MSI (1 << 0)
#define IGB_FLAG_DCA_ENABLED (1 << 1)
#define IGB_FLAG_QUAD_PORT_A (1 << 2)
#define IGB_FLAG_QUEUE_PAIRS (1 << 3)
enum e1000_state_t {
__IGB_TESTING,
......
......@@ -1827,18 +1827,37 @@ static int igb_set_coalesce(struct net_device *netdev,
(ec->rx_coalesce_usecs == 2))
return -EINVAL;
if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
((ec->tx_coalesce_usecs > 3) &&
(ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
(ec->tx_coalesce_usecs == 2))
return -EINVAL;
if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
return -EINVAL;
/* convert to rate of irq's per second */
if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
adapter->itr_setting = ec->rx_coalesce_usecs;
adapter->itr = IGB_START_ITR;
} else {
adapter->itr_setting = ec->rx_coalesce_usecs << 2;
adapter->itr = adapter->itr_setting;
}
if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
adapter->rx_itr_setting = ec->rx_coalesce_usecs;
else
adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
/* convert to rate of irq's per second */
if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
adapter->tx_itr_setting = adapter->rx_itr_setting;
else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
adapter->tx_itr_setting = ec->tx_coalesce_usecs;
else
adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
for (i = 0; i < adapter->num_q_vectors; i++) {
struct igb_q_vector *q_vector = adapter->q_vector[i];
q_vector->itr_val = adapter->itr;
if (q_vector->rx_ring)
q_vector->itr_val = adapter->rx_itr_setting;
else
q_vector->itr_val = adapter->tx_itr_setting;
if (q_vector->itr_val && q_vector->itr_val <= 3)
q_vector->itr_val = IGB_START_ITR;
q_vector->set_itr = 1;
}
......@@ -1850,15 +1869,21 @@ static int igb_get_coalesce(struct net_device *netdev,
{
struct igb_adapter *adapter = netdev_priv(netdev);
if (adapter->itr_setting <= 3)
ec->rx_coalesce_usecs = adapter->itr_setting;
if (adapter->rx_itr_setting <= 3)
ec->rx_coalesce_usecs = adapter->rx_itr_setting;
else
ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
if (adapter->tx_itr_setting <= 3)
ec->tx_coalesce_usecs = adapter->tx_itr_setting;
else
ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
}
return 0;
}
static int igb_nway_reset(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
......
......@@ -734,6 +734,8 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
dev_info(&adapter->pdev->dev, "IOV Disabled\n");
}
#endif
adapter->vfs_allocated_count = 0;
adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
adapter->num_rx_queues = 1;
adapter->num_tx_queues = 1;
adapter->num_q_vectors = 1;
......@@ -791,7 +793,9 @@ static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
q_vector = adapter->q_vector[v_idx];
q_vector->rx_ring = &adapter->rx_ring[ring_idx];
q_vector->rx_ring->q_vector = q_vector;
q_vector->itr_val = adapter->itr;
q_vector->itr_val = adapter->rx_itr_setting;
if (q_vector->itr_val && q_vector->itr_val <= 3)
q_vector->itr_val = IGB_START_ITR;
}
static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
......@@ -802,7 +806,9 @@ static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
q_vector = adapter->q_vector[v_idx];
q_vector->tx_ring = &adapter->tx_ring[ring_idx];
q_vector->tx_ring->q_vector = q_vector;
q_vector->itr_val = adapter->itr;
q_vector->itr_val = adapter->tx_itr_setting;
if (q_vector->itr_val && q_vector->itr_val <= 3)
q_vector->itr_val = IGB_START_ITR;
}
/**
......@@ -1597,9 +1603,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
hw->fc.requested_mode = e1000_fc_default;
hw->fc.current_mode = e1000_fc_default;
adapter->itr_setting = IGB_DEFAULT_ITR;
adapter->itr = IGB_START_ITR;
igb_validate_mdi_setting(hw);
/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
......@@ -1854,6 +1857,9 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter)
adapter->tx_ring_count = IGB_DEFAULT_TXD;
adapter->rx_ring_count = IGB_DEFAULT_RXD;
adapter->rx_itr_setting = IGB_DEFAULT_ITR;
adapter->tx_itr_setting = IGB_DEFAULT_ITR;
adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
......@@ -3052,7 +3058,6 @@ enum latency_range {
latency_invalid = 255
};
/**
* igb_update_ring_itr - update the dynamic ITR value based on packet size
*
......@@ -3216,7 +3221,7 @@ static void igb_set_itr(struct igb_adapter *adapter)
current_itr = max(adapter->rx_itr, adapter->tx_itr);
/* conservative mode (itr 3) eliminates the lowest_latency setting */
if (adapter->itr_setting == 3 && current_itr == lowest_latency)
if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
current_itr = low_latency;
switch (current_itr) {
......@@ -4577,7 +4582,8 @@ static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
struct igb_adapter *adapter = q_vector->adapter;
struct e1000_hw *hw = &adapter->hw;
if (adapter->itr_setting & 3) {
if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
(!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
if (!adapter->msix_entries)
igb_set_itr(adapter);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment