Merge tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx into next/soc

Merge "Xilinx Zynq changes for v3.16" from Michal Simek:

arm: Xilinx Zynq cleanup patches for v3.16

- Add support for BIG Endian
- Add SOC_BUS support
- Sort Kconfig options
- Fix early console

* tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Enable big-endian
  ARM: zynq: Fix uart0 early console virtual address
  clocksource: cadence_ttc: Use readl/writel_relaxed instead of __raw
  ARM: zynq: Sort Kconfig options
  ARM: zynq: Add support for SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/zynq-7000.dtsi

@@ -177,6 +177,11 @@ clkc: clkc@100 {
 			};
 		};
 
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+		} ;
+
 		global_timer: timer@f8f00200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xf8f00200 0x20>;

arch/arm/include/debug/zynq.S

@@ -20,18 +20,18 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
+#define UART0_VIRT		0xF0000000
 #define UART1_PHYS		0xE0001000
-#define UART_SIZE		SZ_4K
-#define UART_VIRT		0xF0001000
+#define UART1_VIRT		0xF0001000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS
+# define LL_UART_VADDR		UART1_VIRT
 #else
 # define LL_UART_PADDR		UART0_PHYS
+# define LL_UART_VADDR		UART0_VIRT
 #endif
 
-#define LL_UART_VADDR		UART_VIRT
-
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =LL_UART_PADDR	@ physical
 		ldr	\rv, =LL_UART_VADDR	@ virtual
@@ -43,12 +43,14 @@
 
 		.macro	waituart,rd,rx
 1001:		ldr	\rd, [\rx, #UART_SR_OFFSET]
+ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART_SR_TXEMPTY
 		beq	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
+ARM_BE8(	rev	\rd, \rd )
 		tst	\rd, #UART_SR_TXFULL		@
 		bne	1002b			@ wait if FIFO is full
 		.endm

arch/arm/mach-zynq/Kconfig

 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
+	select CADENCE_TTC_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ICST
-	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER if !CPU_FREQ
 	select MFD_SYSCON
+	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform

arch/arm/mach-zynq/common.c

@@ -29,6 +29,8 @@
 #include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,10 +39,15 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/smp_scu.h>
+#include <asm/system_info.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 
+#define ZYNQ_DEVCFG_MCTRL		0x80
+#define ZYNQ_DEVCFG_PS_VERSION_SHIFT	28
+#define ZYNQ_DEVCFG_PS_VERSION_MASK	0xF
+
 void __iomem *zynq_scu_base;
 
 /**
@@ -59,6 +66,38 @@ static struct platform_device zynq_cpuidle_device = {
 	.name = "cpuidle-zynq",
 };
 
+/**
+ * zynq_get_revision - Get Zynq silicon revision
+ *
+ * Return: Silicon version or -1 otherwise
+ */
+static int __init zynq_get_revision(void)
+{
+	struct device_node *np;
+	void __iomem *zynq_devcfg_base;
+	u32 revision;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0");
+	if (!np) {
+		pr_err("%s: no devcfg node found\n", __func__);
+		return -1;
+	}
+
+	zynq_devcfg_base = of_iomap(np, 0);
+	if (!zynq_devcfg_base) {
+		pr_err("%s: Unable to map I/O memory\n", __func__);
+		return -1;
+	}
+
+	revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL);
+	revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT;
+	revision &= ZYNQ_DEVCFG_PS_VERSION_MASK;
+
+	iounmap(zynq_devcfg_base);
+
+	return revision;
+}
+
 /**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
@@ -66,13 +105,43 @@ static struct platform_device zynq_cpuidle_device = {
 static void __init zynq_init_machine(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device *parent = NULL;
 
 	/*
 	 * 64KB way size, 8-way associativity, parity disabled
 	 */
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		goto out;
+
+	system_rev = zynq_get_revision();
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq");
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x",
+					 zynq_slcr_get_device_id());
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+		goto out;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+
+out:
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
 	platform_device_register_full(&devinfo);

arch/arm/mach-zynq/common.h

@@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
+extern u32 zynq_slcr_get_device_id(void);
 
 #ifdef CONFIG_SMP
 extern void secondary_startup(void);

arch/arm/mach-zynq/headsmp.S

@@ -8,9 +8,12 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 ENTRY(zynq_secondary_trampoline)
-	ldr	r0, [pc]
+ARM_BE8(setend	be)				@ ensure we are in BE8 mode
+	ldr	r0, zynq_secondary_trampoline_jump
+ARM_BE8(rev	r0, r0)
 	bx	r0
 .globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:

arch/arm/mach-zynq/slcr.c

@@ -26,10 +26,13 @@
 #define SLCR_PS_RST_CTRL_OFFSET		0x200 /* PS Software Reset Control */
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
+#define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
+#define SLCR_PSS_IDCODE_DEVICE_SHIFT	12
+#define SLCR_PSS_IDCODE_DEVICE_MASK	0x1F
 
 static void __iomem *zynq_slcr_base;
 static struct regmap *zynq_slcr_regmap;
@@ -82,6 +85,22 @@ static inline int zynq_slcr_unlock(void)
 	return 0;
 }
 
+/**
+ * zynq_slcr_get_device_id - Read device code id
+ *
+ * Return:	Device code id
+ */
+u32 zynq_slcr_get_device_id(void)
+{
+	u32 val;
+
+	zynq_slcr_read(&val, SLCR_PSS_IDCODE);
+	val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT;
+	val &= SLCR_PSS_IDCODE_DEVICE_MASK;
+
+	return val;
+}
+
 /**
  * zynq_slcr_system_reset - Reset the entire system.
  */

drivers/clocksource/cadence_ttc_timer.c

@@ -118,11 +118,11 @@ static void ttc_set_interval(struct ttc_timer *timer,
 	u32 ctrl_reg;
 
 	/* Disable the counter, set the counter value  and re-enable counter */
-	ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
 	ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
 
-	__raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+	writel_relaxed(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
 
 	/*
 	 * Reset the counter (0x10) so that it starts from 0, one-shot
@@ -130,7 +130,7 @@ static void ttc_set_interval(struct ttc_timer *timer,
 	 */
 	ctrl_reg |= CNT_CNTRL_RESET;
 	ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
 }
 
 /**
@@ -147,7 +147,7 @@ static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
 	struct ttc_timer *timer = &ttce->ttc;
 
 	/* Acknowledge the interrupt and call event handler */
-	__raw_readl(timer->base_addr + TTC_ISR_OFFSET);
+	readl_relaxed(timer->base_addr + TTC_ISR_OFFSET);
 
 	ttce->ce.event_handler(&ttce->ce);
 
@@ -163,13 +163,13 @@ static cycle_t __ttc_clocksource_read(struct clocksource *cs)
 {
 	struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
 
-	return (cycle_t)__raw_readl(timer->base_addr +
+	return (cycle_t)readl_relaxed(timer->base_addr +
 				TTC_COUNT_VAL_OFFSET);
 }
 
 static u64 notrace ttc_sched_clock_read(void)
 {
-	return __raw_readl(ttc_sched_clock_val_reg);
+	return readl_relaxed(ttc_sched_clock_val_reg);
 }
 
 /**
@@ -211,17 +211,17 @@ static void ttc_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_ONESHOT:
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = __raw_readl(timer->base_addr +
+		ctrl_reg = readl_relaxed(timer->base_addr +
 					TTC_CNT_CNTRL_OFFSET);
 		ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
+		writel_relaxed(ctrl_reg,
 				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = __raw_readl(timer->base_addr +
+		ctrl_reg = readl_relaxed(timer->base_addr +
 					TTC_CNT_CNTRL_OFFSET);
 		ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
+		writel_relaxed(ctrl_reg,
 				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
 		break;
 	}
@@ -266,8 +266,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 		 * of an abort.
 		 */
 		ttccs->scale_clk_ctrl_reg_old =
-			__raw_readl(ttccs->ttc.base_addr +
-					TTC_CLK_CNTRL_OFFSET);
+			readl_relaxed(ttccs->ttc.base_addr +
+			TTC_CLK_CNTRL_OFFSET);
 
 		psv = (ttccs->scale_clk_ctrl_reg_old &
 				TTC_CLK_CNTRL_PSV_MASK) >>
@@ -291,8 +291,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 			return NOTIFY_DONE;
 
 		/* scale up: adjust divider now - before frequency change */
-		__raw_writel(ttccs->scale_clk_ctrl_reg_new,
-				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+			       ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
 		break;
 	}
 	case POST_RATE_CHANGE:
@@ -301,8 +301,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 			return NOTIFY_OK;
 
 		/* scale down: adjust divider now - after frequency change */
-		__raw_writel(ttccs->scale_clk_ctrl_reg_new,
-				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		writel_relaxed(ttccs->scale_clk_ctrl_reg_new,
+			       ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
 		break;
 
 	case ABORT_RATE_CHANGE:
@@ -311,8 +311,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 			return NOTIFY_OK;
 
 		/* restore original register value */
-		__raw_writel(ttccs->scale_clk_ctrl_reg_old,
-				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		writel_relaxed(ttccs->scale_clk_ctrl_reg_old,
+			       ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
 		/* fall through */
 	default:
 		return NOTIFY_DONE;
@@ -359,10 +359,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
 	 * with no interrupt and it rolls over at 0xFFFF. Pre-scale
 	 * it by 32 also. Let it start running now.
 	 */
-	__raw_writel(0x0,  ttccs->ttc.base_addr + TTC_IER_OFFSET);
-	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+	writel_relaxed(0x0,  ttccs->ttc.base_addr + TTC_IER_OFFSET);
+	writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
 		     ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
-	__raw_writel(CNT_CNTRL_RESET,
+	writel_relaxed(CNT_CNTRL_RESET,
 		     ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
 
 	err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
@@ -438,10 +438,10 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 	 * is prescaled by 32 using the interval interrupt. Leave it
 	 * disabled for now.
 	 */
-	__raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
-	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+	writel_relaxed(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+	writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
 		     ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
-	__raw_writel(0x1,  ttcce->ttc.base_addr + TTC_IER_OFFSET);
+	writel_relaxed(0x1,  ttcce->ttc.base_addr + TTC_IER_OFFSET);
 
 	err = request_irq(irq, ttc_clock_event_interrupt,
 			  IRQF_TIMER, ttcce->ce.name, ttcce);
@@ -490,7 +490,7 @@ static void __init ttc_timer_init(struct device_node *timer)
 		BUG();
 	}
 
-	clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
+	clksel = readl_relaxed(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
 	clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
 	clk_cs = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_cs)) {
@@ -498,7 +498,7 @@ static void __init ttc_timer_init(struct device_node *timer)
 		BUG();
 	}
 
-	clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
+	clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
 	clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
 	clk_ce = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_ce)) {