Commit 4fdf1824 authored by Dinh Nguyen's avatar Dinh Nguyen

ARM: socfpga_defconfig: update defconfig for SoCFPGA

MARVELL_PHY - support for the Marvell PHY that is on most of the devkits
EEPROM_AT24 - support for I2C EEPROMs on the devkits
GPIO_ALTERA - support for Altera's GPIO driver
NAND - support for the Denali NAND controller along with MTD subsystem
SPI_DESIGNWARE - support for SPI that is on SoCFPGA
SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core
OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it
GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver
LEDS - support for the GPIO LEDs on the SoCFPGA devkits
RTC - support for the DS1307 RTC
JFFS2_FS - support for the JFFS2 filesystem
NFS_V4 - supports for v4 NFS
FUNCTION_TRACER - supports debug function tracing
Signed-off-by: default avatarDinh Nguyen <dinguyen@kernel.org>
parent 7ce7d89f
...@@ -52,14 +52,20 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ...@@ -52,14 +52,20 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_OF_OVERLAY=y CONFIG_OF_OVERLAY=y
CONFIG_OF_CONFIGFS=y
CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_NVME=m CONFIG_BLK_DEV_NVME=m
CONFIG_SRAM=y CONFIG_SRAM=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set # CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
...@@ -69,6 +75,7 @@ CONFIG_E1000E=m ...@@ -69,6 +75,7 @@ CONFIG_E1000E=m
CONFIG_IGB=m CONFIG_IGB=m
CONFIG_IXGBE=m CONFIG_IXGBE=m
CONFIG_STMMAC_ETH=y CONFIG_STMMAC_ETH=y
CONFIG_MARVELL_PHY=y
CONFIG_MICREL_PHY=y CONFIG_MICREL_PHY=y
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_TOUCHSCREEN=y
...@@ -84,14 +91,22 @@ CONFIG_SERIAL_8250_DW=y ...@@ -84,14 +91,22 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_I2C=y CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIOLIB=y CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_DWAPB=y CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_ALTERA_A10SR=y
CONFIG_SENSORS_MAX1619=y
CONFIG_PMBUS=y CONFIG_PMBUS=y
CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y CONFIG_DW_WATCHDOG=y
CONFIG_MFD_ALTERA_A10SR=y
CONFIG_MFD_STMPE=y CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y
...@@ -102,6 +117,14 @@ CONFIG_NOP_USB_XCEIV=y ...@@ -102,6 +117,14 @@ CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_DW=y CONFIG_MMC_DW=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y CONFIG_PL330_DMA=y
CONFIG_DMATEST=m CONFIG_DMATEST=m
...@@ -121,9 +144,10 @@ CONFIG_VFAT_FS=y ...@@ -121,9 +144,10 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y CONFIG_NTFS_RW=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_NFSD=y CONFIG_NFSD=y
CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V3_ACL=y
...@@ -135,5 +159,5 @@ CONFIG_DEBUG_INFO=y ...@@ -135,5 +159,5 @@ CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHED_DEBUG is not set
CONFIG_ENABLE_DEFAULT_TRACERS=y CONFIG_FUNCTION_TRACER=y
CONFIG_DEBUG_USER=y CONFIG_DEBUG_USER=y
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment