Skip to content

L
linux
Commit 50240dc3 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next 

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to igb, e1000e, ixgbe and ixgbevf.

Tom Herbert provides changes to e1000e, igb and ixgbe to call skb_set_hash()
to set the hash and its type in an skbuff.

Carolyn provides a fix for igb where using ethtool for EEE settings, which
was not working correctly.

Jacob provides some trivial cleanups and fixes for ixgbe which mainly
dealt with the file headers.

Julia Lawall provides a one fix for ixgbevf where the driver did not need
to adjust the power state on suspend, so the call to pci_set_power_state()
in the resume function was a no-op.

v2:
- dropped patches 4-6 from original series which implemented debugfs for
  igb from Carolyn based on feed back from David Miller and Or Gerlitz
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents ca30be80 2f586f6b
Hide whitespace changes
Inline Side-by-side
Showing with 132 additions and 51 deletions
drivers/net/ethernet/intel/e1000e/netdev.c
View file @ 50240dc3
......@@ -878,7 +878,7 @@ static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
struct sk_buff *skb)
{
if (netdev->features & NETIF_F_RXHASH)
skb->rxhash = le32_to_cpu(rss);
skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
}
/**
......
drivers/net/ethernet/intel/igb/e1000_82575.h
View file @ 50240dc3
......@@ -265,6 +265,7 @@ u16 igb_rxpbs_adjust_82580(u32 data);
s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
s32 igb_set_eee_i350(struct e1000_hw *);
s32 igb_set_eee_i354(struct e1000_hw *);
s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status);
#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8
#define E1000_EMC_INTERNAL_DATA 0x00
......
drivers/net/ethernet/intel/igb/igb.h
View file @ 50240dc3
......@@ -41,6 +41,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/pci.h>
#include <linux/mdio.h>
struct igb_adapter;
......@@ -455,6 +456,7 @@ struct igb_adapter {
unsigned long link_check_timeout;
int copper_tries;
struct e1000_info ei;
u16 eee_advert;
};
#define IGB_FLAG_HAS_MSI (1 << 0)
......@@ -471,6 +473,7 @@ struct igb_adapter {
#define IGB_FLAG_MAS_CAPABLE (1 << 11)
#define IGB_FLAG_MAS_ENABLE (1 << 12)
#define IGB_FLAG_HAS_MSIX (1 << 13)
#define IGB_FLAG_EEE (1 << 14)
/* Media Auto Sense */
#define IGB_MAS_ENABLE_0 0X0001
......
drivers/net/ethernet/intel/igb/igb_ethtool.c
View file @ 50240dc3
......@@ -2587,7 +2587,7 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 ipcnfg, eeer, ret_val;
u32 ret_val;
u16 phy_data;
if ((hw->mac.type < e1000_i350) ||
......@@ -2596,16 +2596,25 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
edata->supported = (SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full);
if (!hw->dev_spec._82575.eee_disable)
edata->advertised =
mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
ipcnfg = rd32(E1000_IPCNFG);
eeer = rd32(E1000_EEER);
/* The IPCNFG and EEER registers are not supported on I354. */
if (hw->mac.type == e1000_i354) {
igb_get_eee_status_i354(hw, (bool *)&edata->eee_active);
} else {
u32 eeer;
eeer = rd32(E1000_EEER);
/* EEE status on negotiated link */
if (ipcnfg & E1000_IPCNFG_EEE_1G_AN)
edata->advertised = ADVERTISED_1000baseT_Full;
/* EEE status on negotiated link */
if (eeer & E1000_EEER_EEE_NEG)
edata->eee_active = true;
if (ipcnfg & E1000_IPCNFG_EEE_100M_AN)
edata->advertised |= ADVERTISED_100baseT_Full;
if (eeer & E1000_EEER_TX_LPI_EN)
edata->tx_lpi_enabled = true;
}
/* EEE Link Partner Advertised */
switch (hw->mac.type) {
......@@ -2616,8 +2625,8 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
return -ENODATA;
edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
break;
case e1000_i354:
case e1000_i210:
case e1000_i211:
ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210,
......@@ -2633,12 +2642,10 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
break;
}
if (eeer & E1000_EEER_EEE_NEG)
edata->eee_active = true;
edata->eee_enabled = !hw->dev_spec._82575.eee_disable;
if (eeer & E1000_EEER_TX_LPI_EN)
if ((hw->mac.type == e1000_i354) &&
(edata->eee_enabled))
edata->tx_lpi_enabled = true;
/* Report correct negotiated EEE status for devices that
......@@ -2686,9 +2693,10 @@ static int igb_set_eee(struct net_device *netdev,
return -EINVAL;
}
if (eee_curr.advertised != edata->advertised) {
if (edata->advertised &
~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
dev_err(&adapter->pdev->dev,
"Setting EEE Advertisement is not supported\n");
"EEE Advertisement supports only 100Tx and or 100T full duplex\n");
return -EINVAL;
}
......@@ -2698,9 +2706,14 @@ static int igb_set_eee(struct net_device *netdev,
return -EINVAL;
}
adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) {
hw->dev_spec._82575.eee_disable = !edata->eee_enabled;
igb_set_eee_i350(hw);
adapter->flags |= IGB_FLAG_EEE;
if (hw->mac.type == e1000_i350)
igb_set_eee_i350(hw);
else
igb_set_eee_i354(hw);
/* reset link */
if (netif_running(netdev))
......
drivers/net/ethernet/intel/igb/igb_main.c
View file @ 50240dc3
......@@ -1726,6 +1726,10 @@ int igb_up(struct igb_adapter *adapter)
hw->mac.get_link_status = 1;
schedule_work(&adapter->watchdog_task);
if ((adapter->flags & IGB_FLAG_EEE) &&
(!hw->dev_spec._82575.eee_disable))
adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
return 0;
}
......@@ -1974,6 +1978,21 @@ void igb_reset(struct igb_adapter *adapter)
}
}
#endif
/*Re-establish EEE setting */
if (hw->phy.media_type == e1000_media_type_copper) {
switch (mac->type) {
case e1000_i350:
case e1000_i210:
case e1000_i211:
igb_set_eee_i350(hw);
break;
case e1000_i354:
igb_set_eee_i354(hw);
break;
default:
break;
}
}
if (!netif_running(adapter->netdev))
igb_power_down_link(adapter);
......@@ -2560,23 +2579,36 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
(adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
adapter->num_rx_queues, adapter->num_tx_queues);
switch (hw->mac.type) {
case e1000_i350:
case e1000_i210:
case e1000_i211:
igb_set_eee_i350(hw);
break;
case e1000_i354:
if (hw->phy.media_type == e1000_media_type_copper) {
if (hw->phy.media_type == e1000_media_type_copper) {
switch (hw->mac.type) {
case e1000_i350:
case e1000_i210:
case e1000_i211:
/* Enable EEE for internal copper PHY devices */
err = igb_set_eee_i350(hw);
if ((!err) &&
(!hw->dev_spec._82575.eee_disable)) {
adapter->eee_advert =
MDIO_EEE_100TX | MDIO_EEE_1000T;
adapter->flags |= IGB_FLAG_EEE;
}
break;
case e1000_i354:
if ((rd32(E1000_CTRL_EXT) &
E1000_CTRL_EXT_LINK_MODE_SGMII))
igb_set_eee_i354(hw);
E1000_CTRL_EXT_LINK_MODE_SGMII)) {
err = igb_set_eee_i354(hw);
if ((!err) &&
(!hw->dev_spec._82575.eee_disable)) {
adapter->eee_advert =
MDIO_EEE_100TX | MDIO_EEE_1000T;
adapter->flags |= IGB_FLAG_EEE;
}
}
break;
default:
break;
}
break;
default:
break;
}
pm_runtime_put_noidle(&pdev->dev);
return 0;
......@@ -4158,6 +4190,15 @@ static void igb_watchdog_task(struct work_struct *work)
(ctrl & E1000_CTRL_RFCE) ? "RX" :
(ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
/* disable EEE if enabled */
if ((adapter->flags & IGB_FLAG_EEE) &&
(adapter->link_duplex == HALF_DUPLEX)) {
dev_info(&adapter->pdev->dev,
"EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
adapter->hw.dev_spec._82575.eee_disable = true;
adapter->flags &= ~IGB_FLAG_EEE;
}
/* check if SmartSpeed worked */
igb_check_downshift(hw);
if (phy->speed_downgraded)
......@@ -6620,7 +6661,9 @@ static inline void igb_rx_hash(struct igb_ring *ring,
struct sk_buff *skb)
{
if (ring->netdev->features & NETIF_F_RXHASH)
skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
skb_set_hash(skb,
le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
PKT_HASH_TYPE_L3);
}
/**
......
drivers/net/ethernet/intel/ixgbe/ixgbe.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......@@ -104,6 +105,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
......@@ -205,8 +207,6 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
}
hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
/* set the completion timeout for interface */
if (ret_val == 0)
ixgbe_set_pcie_completion_timeout(hw);
......@@ -1241,14 +1241,14 @@ static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
}
/**
* ixgbe_set_rxpba_82598 - Configure packet buffers
* ixgbe_set_rxpba_82598 - Initialize RX packet buffer
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure packet buffers.
*/
static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
int strategy)
* @num_pb: number of packet buffers to allocate
* @headroom: reserve n KB of headroom
* @strategy: packet buffer allocation strategy
**/
static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
u32 headroom, int strategy)
{
u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
u8 i = 0;
......
drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......@@ -270,6 +271,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
......@@ -510,7 +512,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
*
* Disables link, should be called during D3 power down sequence.
*
*/
**/
static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
{
u32 autoc2_reg;
......@@ -1003,8 +1005,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
out:
if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
hw_dbg(hw, "Smartspeed has downgraded the link speed from "
"the maximum advertised\n");
hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
return status;
}
......@@ -1112,8 +1113,7 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
status =
IXGBE_ERR_AUTONEG_NOT_COMPLETE;
hw_dbg(hw, "Autoneg did not "
"complete.\n");
hw_dbg(hw, "Autoneg did not complete.\n");
}
}
}
......@@ -2025,7 +2025,6 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
/* We need to run link autotry after the driver loads */
hw->mac.autotry_restart = true;
hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
if (ret_val == 0)
ret_val = ixgbe_verify_fw_version_82599(hw);
......
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......@@ -585,7 +586,7 @@ static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe,
struct dma_pool *pool;
char pool_name[32];
snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu);
pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX,
IXGBE_FCPTR_ALIGN, PAGE_SIZE);
......
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......@@ -1311,7 +1312,9 @@ static inline void ixgbe_rx_hash(struct ixgbe_ring *ring,
struct sk_buff *skb)
{
if (ring->netdev->features & NETIF_F_RXHASH)
skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
skb_set_hash(skb,
le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
PKT_HASH_TYPE_L3);
}
#ifdef IXGBE_FCOE
......
drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......
drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
View file @ 50240dc3
......@@ -20,6 +20,7 @@
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
......@@ -61,6 +62,7 @@ static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
......@@ -187,7 +189,6 @@ static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
goto out;
ret_val = ixgbe_start_hw_gen2(hw);
hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
out:
return ret_val;
}
......
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
View file @ 50240dc3
......@@ -3280,7 +3280,6 @@ static int ixgbevf_resume(struct pci_dev *pdev)
struct ixgbevf_adapter *adapter = netdev_priv(netdev);
u32 err;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
/*
* pci_restore_state clears dev->state_saved so call
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7