Commit 5041f1f1 authored by Yoichi Yuasa's avatar Yoichi Yuasa Committed by David Woodhouse

[MTD] Remove Momenco Ocelot NOR flash support

This patch has removed Momenco Ocelot support from MTD.
Ocelot support has already removed.
Signed-off-by: default avatarYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: default avatarDavid Woodhouse <dwmw2@infradead.org>
parent 98b830d2
......@@ -384,14 +384,6 @@ config MTD_REDWOOD
Redwood board. If you have one of these boards and would like to
use the flash chips on it, say 'Y'.
config MTD_OCELOT
tristate "Momenco Ocelot boot flash device"
depends on MOMENCO_OCELOT
help
This enables access routines for the boot flash device and for the
NVRAM on the Momenco Ocelot board. If you have one of these boards
and would like access to either of these, say 'Y'.
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
......
......@@ -43,7 +43,6 @@ obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o
obj-$(CONFIG_MTD_VMAX) += vmax301.o
obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
obj-$(CONFIG_MTD_OCELOT) += ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
......
/*
* $Id: ocelot.c,v 1.17 2005/11/07 11:14:27 gleixner Exp $
*
* Flash on Momenco Ocelot
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#define OCELOT_PLD 0x2c000000
#define FLASH_WINDOW_ADDR 0x2fc00000
#define FLASH_WINDOW_SIZE 0x00080000
#define FLASH_BUSWIDTH 1
#define NVRAM_WINDOW_ADDR 0x2c800000
#define NVRAM_WINDOW_SIZE 0x00007FF0
#define NVRAM_BUSWIDTH 1
static unsigned int cacheflush = 0;
static struct mtd_info *flash_mtd;
static struct mtd_info *nvram_mtd;
static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
{
struct map_info *map = mtd->priv;
size_t done = 0;
/* If we use memcpy, it does word-wide writes. Even though we told the
GT64120A that it's an 8-bit wide region, word-wide writes don't work.
We end up just writing the first byte of the four to all four bytes.
So we have this loop instead */
*retlen = len;
while(len) {
__raw_writeb(*(unsigned char *) from, map->virt + to);
from++;
to++;
len--;
}
}
static struct mtd_partition *parsed_parts;
struct map_info ocelot_flash_map = {
.name = "Ocelot boot flash",
.size = FLASH_WINDOW_SIZE,
.bankwidth = FLASH_BUSWIDTH,
.phys = FLASH_WINDOW_ADDR,
};
struct map_info ocelot_nvram_map = {
.name = "Ocelot NVRAM",
.size = NVRAM_WINDOW_SIZE,
.bankwidth = NVRAM_BUSWIDTH,
.phys = NVRAM_WINDOW_ADDR,
};
static const char *probes[] = { "RedBoot", NULL };
static int __init init_ocelot_maps(void)
{
void *pld;
int nr_parts;
unsigned char brd_status;
printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n",
FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR);
/* First check whether the flash jumper is present */
pld = ioremap(OCELOT_PLD, 0x10);
if (!pld) {
printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n");
return -EIO;
}
brd_status = readb(pld+4);
iounmap(pld);
/* Now ioremap the NVRAM space */
ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, NVRAM_WINDOW_SIZE);
if (!ocelot_nvram_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n");
return -EIO;
}
simple_map_init(&ocelot_nvram_map);
/* And do the RAM probe on it to get an MTD device */
nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map);
if (!nvram_mtd) {
printk("NVRAM probe failed\n");
goto fail_1;
}
nvram_mtd->owner = THIS_MODULE;
nvram_mtd->erasesize = 16;
/* Override the write() method */
nvram_mtd->write = ocelot_ram_write;
/* Now map the flash space */
ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE);
if (!ocelot_flash_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n");
goto fail_2;
}
/* Now the cached version */
ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE, 0);
simple_map_init(&ocelot_flash_map);
/* Only probe for flash if the write jumper is present */
if (brd_status & 0x40) {
flash_mtd = do_map_probe("jedec", &ocelot_flash_map);
} else {
printk(KERN_NOTICE "Ocelot flash write jumper not present. Treating as ROM\n");
}
/* If that failed or the jumper's absent, pretend it's ROM */
if (!flash_mtd) {
flash_mtd = do_map_probe("map_rom", &ocelot_flash_map);
/* If we're treating it as ROM, set the erase size */
if (flash_mtd)
flash_mtd->erasesize = 0x10000;
}
if (!flash_mtd)
goto fail3;
add_mtd_device(nvram_mtd);
flash_mtd->owner = THIS_MODULE;
nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
if (nr_parts > 0)
add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
else
add_mtd_device(flash_mtd);
return 0;
fail3:
iounmap((void *)ocelot_flash_map.virt);
if (ocelot_flash_map.cached)
iounmap((void *)ocelot_flash_map.cached);
fail_2:
map_destroy(nvram_mtd);
fail_1:
iounmap((void *)ocelot_nvram_map.virt);
return -ENXIO;
}
static void __exit cleanup_ocelot_maps(void)
{
del_mtd_device(nvram_mtd);
map_destroy(nvram_mtd);
iounmap((void *)ocelot_nvram_map.virt);
if (parsed_parts)
del_mtd_partitions(flash_mtd);
else
del_mtd_device(flash_mtd);
map_destroy(flash_mtd);
iounmap((void *)ocelot_flash_map.virt);
if (ocelot_flash_map.cached)
iounmap((void *)ocelot_flash_map.cached);
}
module_init(init_ocelot_maps);
module_exit(cleanup_ocelot_maps);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment