Commit 50d3a118 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by Ben Hutchings

mb86a20s: fix the locking logic

commit dafb65fb upstream.

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 48d8ca39
...@@ -477,7 +477,11 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) ...@@ -477,7 +477,11 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
if (val >= 7) if (val >= 7)
*status |= FE_HAS_SYNC; *status |= FE_HAS_SYNC;
if (val >= 8) /* Maybe 9? */ /*
* Actually, on state S8, it starts receiving TS, but the TS
* output is only on normal state after the transition to S9.
*/
if (val >= 9)
*status |= FE_HAS_LOCK; *status |= FE_HAS_LOCK;
dprintk("val = %d, status = 0x%02x\n", val, *status); dprintk("val = %d, status = 0x%02x\n", val, *status);
...@@ -562,6 +566,11 @@ static void mb86a20s_release(struct dvb_frontend *fe) ...@@ -562,6 +566,11 @@ static void mb86a20s_release(struct dvb_frontend *fe)
kfree(state); kfree(state);
} }
static int mb86a20s_get_frontend_algo(struct dvb_frontend *fe)
{
return DVBFE_ALGO_HW;
}
static struct dvb_frontend_ops mb86a20s_ops; static struct dvb_frontend_ops mb86a20s_ops;
struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
...@@ -632,6 +641,7 @@ static struct dvb_frontend_ops mb86a20s_ops = { ...@@ -632,6 +641,7 @@ static struct dvb_frontend_ops mb86a20s_ops = {
.read_status = mb86a20s_read_status, .read_status = mb86a20s_read_status,
.read_signal_strength = mb86a20s_read_signal_strength, .read_signal_strength = mb86a20s_read_signal_strength,
.tune = mb86a20s_tune, .tune = mb86a20s_tune,
.get_frontend_algo = mb86a20s_get_frontend_algo,
}; };
MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware"); MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment