Commit 50e4b5ca authored by Tony Lindgren's avatar Tony Lindgren

Merge branch 'ti-sysc-fixes' into fixes

parents 58e16d79 5b63fb90
......@@ -234,13 +234,33 @@ edma_tptc2: tptc@49a00000 {
interrupt-names = "edma3_tcerrint";
};
mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x47810000 0x1000>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;
mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x0 0x1000>;
};
};
usb: usb@47400000 {
......
......@@ -228,13 +228,33 @@ edma_tptc2: tptc@49a00000 {
interrupt-names = "edma3_tcerrint";
};
mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
reg = <0x47810000 0x1000>;
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;
mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0x1000>;
};
};
sham: sham@53100000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment