ARM: dts: stm32: Add I2C1 support for STM32F429 SoC

This patch adds I2C1 support for STM32F429 SoC
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

arch/arm/boot/dts/stm32f429.dtsi

@@ -342,6 +342,18 @@ usart5: serial@40005000 {
 			status = "disabled";
 		};
 
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		usart7: serial@40007800 {
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007800 0x400>;
@@ -714,6 +726,16 @@ pins {
 						 <STM32F429_PB5_FUNC_TIM3_CH2>;
 				};
 			};
+
+			i2c1_pins: i2c1@0 {
+				pins {
+					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+						 <STM32F429_PB6_FUNC_I2C1_SCL>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		rcc: rcc@40023810 {