Commit 5269102e authored by Gábor Stefanik's avatar Gábor Stefanik Committed by John W. Linville

b43: LP-PHY: Update code for spec fixes, and fix a few typos

A few typos have been discovered in both the specs and the code.
This patch fixes them.

Also use lpphy_op_switch_channel consistently, and make all users
of it print its return value for easier debugging.
Signed-off-by: default avatarGábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 055114a3
......@@ -552,7 +552,7 @@ static void lpphy_2062_init(struct b43_wldev *dev)
B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
B43_WARN_ON(crystalfreq == 0);
if (crystalfreq >= 30000000) {
if (crystalfreq <= 30000000) {
lpphy->pdiv = 1;
b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
} else {
......@@ -560,14 +560,16 @@ static void lpphy_2062_init(struct b43_wldev *dev)
b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
}
tmp = (800000000 * lpphy->pdiv + crystalfreq) /
(32000000 * lpphy->pdiv);
tmp = (tmp - 1) & 0xFF;
tmp = (((800000000 * lpphy->pdiv + crystalfreq) /
(2 * crystalfreq)) - 8) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL7, tmp);
tmp = (((100 * crystalfreq + 16000000 * lpphy->pdiv) /
(32000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
tmp = (2 * crystalfreq + 1000000 * lpphy->pdiv) /
(2000000 * lpphy->pdiv);
tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
tmp = (((2 * crystalfreq + 1000000 * lpphy->pdiv) /
(2000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);
......@@ -671,7 +673,7 @@ static void lpphy_radio_init(struct b43_wldev *dev)
b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
udelay(1);
if (dev->phy.rev < 2) {
if (dev->phy.radio_ver == 0x2062) {
lpphy_2062_init(dev);
} else {
lpphy_2063_init(dev);
......@@ -688,11 +690,18 @@ struct lpphy_iq_est { u32 iq_prod, i_pwr, q_pwr; };
static void lpphy_set_rc_cap(struct b43_wldev *dev)
{
u8 rc_cap = dev->phy.lp->rc_cap;
struct b43_phy_lp *lpphy = dev->phy.lp;
u8 rc_cap = (lpphy->rc_cap & 0x1F) >> 1;
b43_radio_write(dev, B2062_N_RXBB_CALIB2, max_t(u8, rc_cap-4, 0x80));
b43_radio_write(dev, B2062_N_TX_CTL_A, ((rc_cap & 0x1F) >> 1) | 0x80);
b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80);
if (dev->phy.rev == 1) //FIXME check channel 14!
rc_cap = max_t(u8, rc_cap + 5, 15);
b43_radio_write(dev, B2062_N_RXBB_CALIB2,
max_t(u8, lpphy->rc_cap - 4, 0x80));
b43_radio_write(dev, B2062_N_TX_CTL_A, rc_cap | 0x80);
b43_radio_write(dev, B2062_S_RXG_CNT16,
((lpphy->rc_cap & 0x1F) >> 2) | 0x80);
}
static u8 lpphy_get_bb_mult(struct b43_wldev *dev)
......@@ -1101,6 +1110,9 @@ static void lpphy_set_tx_power_control(struct b43_wldev *dev,
lpphy_write_tx_pctl_mode_to_hardware(dev);
}
static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel);
static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
......@@ -1118,11 +1130,16 @@ static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
old_rf2_ovr, old_rf2_ovrval, old_phy_ctl;
enum b43_lpphy_txpctl_mode old_txpctl;
u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;
int loopback, i, j, inner_sum;
int loopback, i, j, inner_sum, err;
memset(&iq_est, 0, sizeof(iq_est));
b43_switch_channel(dev, 7);
err = b43_lpphy_op_switch_channel(dev, 7);
if (err) {
b43dbg(dev->wl,
"RC calib: Failed to switch to channel 7, error = %d",
err);
}
old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1;
old_bbmult = lpphy_get_bb_mult(dev);
if (old_txg_ovr)
......@@ -1881,14 +1898,14 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
{
struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->dev->bus;
static const struct b206x_channel *chandata = NULL;
const struct b206x_channel *chandata = NULL;
u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
int i, err = 0;
for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
if (b2063_chantbl[i].channel == channel) {
chandata = &b2063_chantbl[i];
for (i = 0; i < ARRAY_SIZE(b2062_chantbl); i++) {
if (b2062_chantbl[i].channel == channel) {
chandata = &b2062_chantbl[i];
break;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment