Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-next

Documentation/devicetree/bindings/sound/pcm512x.txt

+PCM512x audio CODECs
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : One of "ti,pcm5121" or "ti,pcm5122"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+  - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
+    device, as covered in bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - clocks : A clock specifier for the clock connected as SCLK.  If this
+    is absent the device will be configured to clock from BCLK.
+
+Example:
+
+	pcm5122: pcm5122@4c {
+		compatible = "ti,pcm5122";
+		reg = <0x4c>;
+
+		AVDD-supply = <&reg_3v3_analog>;
+		DVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_3v3>;
+	};

sound/soc/codecs/Kconfig

@@ -59,6 +59,8 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_PCM1681 if I2C
 	select SND_SOC_PCM1792A if SPI_MASTER
 	select SND_SOC_PCM3008
+	select SND_SOC_PCM512x_I2C if I2C
+	select SND_SOC_PCM512x_SPI if SPI_MASTER
 	select SND_SOC_RT5631 if I2C
 	select SND_SOC_RT5640 if I2C
 	select SND_SOC_SGTL5000 if I2C
@@ -313,6 +315,21 @@ config SND_SOC_PCM1792A
 config SND_SOC_PCM3008
        tristate
 
+config SND_SOC_PCM512x
+	tristate
+
+config SND_SOC_PCM512x_I2C
+	tristate "Texas Instruments PCM512x CODECs - I2C"
+	depends on I2C
+	select SND_SOC_PCM512x
+	select REGMAP_I2C
+
+config SND_SOC_PCM512x_SPI
+	tristate "Texas Instruments PCM512x CODECs - SPI"
+	depends on SPI_MASTER
+	select SND_SOC_PCM512x
+	select REGMAP_SPI
+
 config SND_SOC_RT5631
 	tristate
 

sound/soc/codecs/Makefile

@@ -46,6 +46,9 @@ snd-soc-hdmi-codec-objs := hdmi.o
 snd-soc-pcm1681-objs := pcm1681.o
 snd-soc-pcm1792a-codec-objs := pcm1792a.o
 snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-pcm512x-objs := pcm512x.o
+snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
+snd-soc-pcm512x-spi-objs := pcm512x-spi.o
 snd-soc-rt5631-objs := rt5631.o
 snd-soc-rt5640-objs := rt5640.o
 snd-soc-sgtl5000-objs := sgtl5000.o
@@ -179,6 +182,9 @@ obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
 obj-$(CONFIG_SND_SOC_PCM1681)	+= snd-soc-pcm1681.o
 obj-$(CONFIG_SND_SOC_PCM1792A)	+= snd-soc-pcm1792a-codec.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_PCM512x)	+= snd-soc-pcm512x.o
+obj-$(CONFIG_SND_SOC_PCM512x_I2C)	+= snd-soc-pcm512x-i2c.o
+obj-$(CONFIG_SND_SOC_PCM512x_SPI)	+= snd-soc-pcm512x-spi.o
 obj-$(CONFIG_SND_SOC_RT5631)	+= snd-soc-rt5631.o
 obj-$(CONFIG_SND_SOC_RT5640)	+= snd-soc-rt5640.o
 obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o

sound/soc/codecs/pcm512x-i2c.c

+/*
+ * Driver for the PCM512x CODECs
+ *
+ * Author:	Mark Brown <broonie@linaro.org>
+ *		Copyright 2014 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include "pcm512x.h"
+
+static int pcm512x_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(i2c, &pcm512x_regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return pcm512x_probe(&i2c->dev, regmap);
+}
+
+static int pcm512x_i2c_remove(struct i2c_client *i2c)
+{
+	pcm512x_remove(&i2c->dev);
+	return 0;
+}
+
+static const struct i2c_device_id pcm512x_i2c_id[] = {
+	{ "pcm5121", },
+	{ "pcm5122", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcm512x_i2c_id);
+
+static const struct of_device_id pcm512x_of_match[] = {
+	{ .compatible = "ti,pcm5121", },
+	{ .compatible = "ti,pcm5122", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pcm512x_of_match);
+
+static struct i2c_driver pcm512x_i2c_driver = {
+	.probe 		= pcm512x_i2c_probe,
+	.remove 	= pcm512x_i2c_remove,
+	.id_table	= pcm512x_i2c_id,
+	.driver		= {
+		.name	= "pcm512x",
+		.owner	= THIS_MODULE,
+		.of_match_table = pcm512x_of_match,
+		.pm     = &pcm512x_pm_ops,
+	},
+};
+
+module_i2c_driver(pcm512x_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC PCM512x codec driver - I2C");
+MODULE_AUTHOR("Mark Brown <broonie@linaro.org>");
+MODULE_LICENSE("GPL v2");

sound/soc/codecs/pcm512x-spi.c

+/*
+ * Driver for the PCM512x CODECs
+ *
+ * Author:	Mark Brown <broonie@linaro.org>
+ *		Copyright 2014 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "pcm512x.h"
+
+static int pcm512x_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = devm_regmap_init_spi(spi, &pcm512x_regmap);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		return ret;
+	}
+
+	return pcm512x_probe(&spi->dev, regmap);
+}
+
+static int pcm512x_spi_remove(struct spi_device *spi)
+{
+	pcm512x_remove(&spi->dev);
+	return 0;
+}
+
+static const struct spi_device_id pcm512x_spi_id[] = {
+	{ "pcm5121", },
+	{ "pcm5122", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, pcm512x_spi_id);
+
+static const struct of_device_id pcm512x_of_match[] = {
+	{ .compatible = "ti,pcm5121", },
+	{ .compatible = "ti,pcm5122", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pcm512x_of_match);
+
+static struct spi_driver pcm512x_spi_driver = {
+	.probe		= pcm512x_spi_probe,
+	.remove		= pcm512x_spi_remove,
+	.id_table	= pcm512x_spi_id,
+	.driver = {
+		.name	= "pcm512x",
+		.owner	= THIS_MODULE,
+		.of_match_table = pcm512x_of_match,
+		.pm     = &pcm512x_pm_ops,
+	},
+};
+
+module_spi_driver(pcm512x_spi_driver);

sound/soc/codecs/pcm512x.h

+/*
+ * Driver for the PCM512x CODECs
+ *
+ * Author:	Mark Brown <broonie@linaro.org>
+ *		Copyright 2014 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _SND_SOC_PCM512X
+#define _SND_SOC_PCM512X
+
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+#define PCM512x_VIRT_BASE 0x100
+#define PCM512x_PAGE_LEN  0x100
+#define PCM512x_PAGE_BASE(n)  (PCM512x_VIRT_BASE + (PCM512x_PAGE_LEN * n))
+
+#define PCM512x_PAGE              0
+
+#define PCM512x_RESET             (PCM512x_PAGE_BASE(0) +   1)
+#define PCM512x_POWER             (PCM512x_PAGE_BASE(0) +   2)
+#define PCM512x_MUTE              (PCM512x_PAGE_BASE(0) +   3)
+#define PCM512x_PLL_EN            (PCM512x_PAGE_BASE(0) +   4)
+#define PCM512x_SPI_MISO_FUNCTION (PCM512x_PAGE_BASE(0) +   6)
+#define PCM512x_DSP               (PCM512x_PAGE_BASE(0) +   7)
+#define PCM512x_GPIO_EN           (PCM512x_PAGE_BASE(0) +   8)
+#define PCM512x_BCLK_LRCLK_CFG    (PCM512x_PAGE_BASE(0) +   9)
+#define PCM512x_DSP_GPIO_INPUT    (PCM512x_PAGE_BASE(0) +  10)
+#define PCM512x_MASTER_MODE       (PCM512x_PAGE_BASE(0) +  12)
+#define PCM512x_PLL_REF           (PCM512x_PAGE_BASE(0) +  13)
+#define PCM512x_PLL_COEFF_0       (PCM512x_PAGE_BASE(0) +  20)
+#define PCM512x_PLL_COEFF_1       (PCM512x_PAGE_BASE(0) +  21)
+#define PCM512x_PLL_COEFF_2       (PCM512x_PAGE_BASE(0) +  22)
+#define PCM512x_PLL_COEFF_3       (PCM512x_PAGE_BASE(0) +  23)
+#define PCM512x_PLL_COEFF_4       (PCM512x_PAGE_BASE(0) +  24)
+#define PCM512x_DSP_CLKDIV        (PCM512x_PAGE_BASE(0) +  27)
+#define PCM512x_DAC_CLKDIV        (PCM512x_PAGE_BASE(0) +  28)
+#define PCM512x_NCP_CLKDIV        (PCM512x_PAGE_BASE(0) +  29)
+#define PCM512x_OSR_CLKDIV        (PCM512x_PAGE_BASE(0) +  30)
+#define PCM512x_MASTER_CLKDIV_1   (PCM512x_PAGE_BASE(0) +  32)
+#define PCM512x_MASTER_CLKDIV_2   (PCM512x_PAGE_BASE(0) +  33)
+#define PCM512x_FS_SPEED_MODE     (PCM512x_PAGE_BASE(0) +  34)
+#define PCM512x_IDAC_1            (PCM512x_PAGE_BASE(0) +  35)
+#define PCM512x_IDAC_2            (PCM512x_PAGE_BASE(0) +  36)
+#define PCM512x_ERROR_DETECT      (PCM512x_PAGE_BASE(0) +  37)
+#define PCM512x_I2S_1             (PCM512x_PAGE_BASE(0) +  40)
+#define PCM512x_I2S_2             (PCM512x_PAGE_BASE(0) +  41)
+#define PCM512x_DAC_ROUTING       (PCM512x_PAGE_BASE(0) +  42)
+#define PCM512x_DSP_PROGRAM       (PCM512x_PAGE_BASE(0) +  43)
+#define PCM512x_CLKDET            (PCM512x_PAGE_BASE(0) +  44)
+#define PCM512x_AUTO_MUTE         (PCM512x_PAGE_BASE(0) +  59)
+#define PCM512x_DIGITAL_VOLUME_1  (PCM512x_PAGE_BASE(0) +  60)
+#define PCM512x_DIGITAL_VOLUME_2  (PCM512x_PAGE_BASE(0) +  61)
+#define PCM512x_DIGITAL_VOLUME_3  (PCM512x_PAGE_BASE(0) +  62)
+#define PCM512x_DIGITAL_MUTE_1    (PCM512x_PAGE_BASE(0) +  63)
+#define PCM512x_DIGITAL_MUTE_2    (PCM512x_PAGE_BASE(0) +  64)
+#define PCM512x_DIGITAL_MUTE_3    (PCM512x_PAGE_BASE(0) +  65)
+#define PCM512x_GPIO_OUTPUT_1     (PCM512x_PAGE_BASE(0) +  80)
+#define PCM512x_GPIO_OUTPUT_2     (PCM512x_PAGE_BASE(0) +  81)
+#define PCM512x_GPIO_OUTPUT_3     (PCM512x_PAGE_BASE(0) +  82)
+#define PCM512x_GPIO_OUTPUT_4     (PCM512x_PAGE_BASE(0) +  83)
+#define PCM512x_GPIO_OUTPUT_5     (PCM512x_PAGE_BASE(0) +  84)
+#define PCM512x_GPIO_OUTPUT_6     (PCM512x_PAGE_BASE(0) +  85)
+#define PCM512x_GPIO_CONTROL_1    (PCM512x_PAGE_BASE(0) +  86)
+#define PCM512x_GPIO_CONTROL_2    (PCM512x_PAGE_BASE(0) +  87)
+#define PCM512x_OVERFLOW          (PCM512x_PAGE_BASE(0) +  90)
+#define PCM512x_RATE_DET_1        (PCM512x_PAGE_BASE(0) +  91)
+#define PCM512x_RATE_DET_2        (PCM512x_PAGE_BASE(0) +  92)
+#define PCM512x_RATE_DET_3        (PCM512x_PAGE_BASE(0) +  93)
+#define PCM512x_RATE_DET_4        (PCM512x_PAGE_BASE(0) +  94)
+#define PCM512x_ANALOG_MUTE_DET   (PCM512x_PAGE_BASE(0) + 108)
+#define PCM512x_GPIN              (PCM512x_PAGE_BASE(0) + 119)
+#define PCM512x_DIGITAL_MUTE_DET  (PCM512x_PAGE_BASE(0) + 120)
+
+#define PCM512x_OUTPUT_AMPLITUDE  (PCM512x_PAGE_BASE(1) +   1)
+#define PCM512x_ANALOG_GAIN_CTRL  (PCM512x_PAGE_BASE(1) +   2)
+#define PCM512x_UNDERVOLTAGE_PROT (PCM512x_PAGE_BASE(1) +   5)
+#define PCM512x_ANALOG_MUTE_CTRL  (PCM512x_PAGE_BASE(1) +   6)
+#define PCM512x_ANALOG_GAIN_BOOST (PCM512x_PAGE_BASE(1) +   7)
+#define PCM512x_VCOM_CTRL_1       (PCM512x_PAGE_BASE(1) +   8)
+#define PCM512x_VCOM_CTRL_2       (PCM512x_PAGE_BASE(1) +   9)
+
+#define PCM512x_CRAM_CTRL         (PCM512x_PAGE_BASE(44) +  1)
+
+#define PCM512x_MAX_REGISTER      (PCM512x_PAGE_BASE(44) +  1)
+
+/* Page 0, Register 1 - reset */
+#define PCM512x_RSTR (1 << 0)
+#define PCM512x_RSTM (1 << 4)
+
+/* Page 0, Register 2 - power */
+#define PCM512x_RQPD       (1 << 0)
+#define PCM512x_RQPD_SHIFT 0
+#define PCM512x_RQST       (1 << 4)
+#define PCM512x_RQST_SHIFT 4
+
+/* Page 0, Register 3 - mute */
+#define PCM512x_RQMR_SHIFT 0
+#define PCM512x_RQML_SHIFT 4
+
+/* Page 0, Register 4 - PLL */
+#define PCM512x_PLCE       (1 << 0)
+#define PCM512x_RLCE_SHIFT 0
+#define PCM512x_PLCK       (1 << 4)
+#define PCM512x_PLCK_SHIFT 4
+
+/* Page 0, Register 7 - DSP */
+#define PCM512x_SDSL       (1 << 0)
+#define PCM512x_SDSL_SHIFT 0
+#define PCM512x_DEMP       (1 << 4)
+#define PCM512x_DEMP_SHIFT 4
+
+/* Page 0, Register 13 - PLL reference */
+#define PCM512x_SREF (1 << 4)
+
+/* Page 0, Register 37 - Error detection */
+#define PCM512x_IPLK (1 << 0)
+#define PCM512x_DCAS (1 << 1)
+#define PCM512x_IDCM (1 << 2)
+#define PCM512x_IDCH (1 << 3)
+#define PCM512x_IDSK (1 << 4)
+#define PCM512x_IDBK (1 << 5)
+#define PCM512x_IDFS (1 << 6)
+
+/* Page 0, Register 42 - DAC routing */
+#define PCM512x_AUPR_SHIFT 0
+#define PCM512x_AUPL_SHIFT 4
+
+/* Page 0, Register 59 - auto mute */
+#define PCM512x_ATMR_SHIFT 0
+#define PCM512x_ATML_SHIFT 4
+
+/* Page 0, Register 63 - ramp rates */
+#define PCM512x_VNDF_SHIFT 6
+#define PCM512x_VNDS_SHIFT 4
+#define PCM512x_VNUF_SHIFT 2
+#define PCM512x_VNUS_SHIFT 0
+
+/* Page 0, Register 64 - emergency ramp rates */
+#define PCM512x_VEDF_SHIFT 6
+#define PCM512x_VEDS_SHIFT 4
+
+/* Page 0, Register 65 - Digital mute enables */
+#define PCM512x_ACTL_SHIFT 2
+#define PCM512x_AMLE_SHIFT 1
+#define PCM512x_AMLR_SHIFT 0
+
+/* Page 1, Register 2 - analog volume control */
+#define PCM512x_RAGN_SHIFT 0
+#define PCM512x_LAGN_SHIFT 4
+
+/* Page 1, Register 7 - analog boost control */
+#define PCM512x_AGBR_SHIFT 0
+#define PCM512x_AGBL_SHIFT 4
+
+extern const struct dev_pm_ops pcm512x_pm_ops;
+extern const struct regmap_config pcm512x_regmap;
+
+int pcm512x_probe(struct device *dev, struct regmap *regmap);
+void pcm512x_remove(struct device *dev);
+
+#endif